Did you know OCZ 3500EL wont run at 3.5v 24/7 :) itll run about 24/2.4 then you gotta buy new ram!Quote:
Originally posted by skate2snow
It's true that Vdimm rarely killed a pair of RAM's
Printable View
Did you know OCZ 3500EL wont run at 3.5v 24/7 :) itll run about 24/2.4 then you gotta buy new ram!Quote:
Originally posted by skate2snow
It's true that Vdimm rarely killed a pair of RAM's
Yeah broken der HWare b4. :bsod: :cussing: :explode:
Now that I can get a tool specifically designed for the task....
ALL I HAVE ARE DFI UIs :cussing:
Oh well looking at mobile A64 / 754, (suggestions as to most usable W/O buying a 2nd/ normal CPU just to boot the first time?)
280 fsb 2-2-2-5 1:1 @3.8v :D ( BH-5 )Quote:
Originally posted by Geforce4ti4200
" I may try this and a stick of bh5 ram and how does 275fsb 1:1 at 2-2-2-5 sound? anyone know what volts youd need and is that OCz booster capable? I
Picture
Btw anybody know how much volt a BH-6 stick ( 512mb ) may have
I know that BH-5 is rated 3.6v , but what is BH-6 rated ?
smokin, now on w/ some benchies!!!! :banana:Quote:
Originally posted by Cranox
280 fsb 2-2-2-5 1:1 @3.8v :D ( BH-5 )
Picture
Btw anybody know how much volt a BH-6 stick ( 512mb ) may have
I know that BH-5 is rated 3.6v , but what is BH-6 rated ?
hallelujah :banana:Quote:
Originally posted by DarkManX_BG
LOL
Increase the voltage of a tool that's specifically made to increase voltage... I love this place :D
:thumbsup: :hehe: :devil: :)Quote:
Originally posted by Kunaak
...this is XtremeSystems, not ChickenSystems...
...after all, this is XS, not "average systems.com" or a "OC alittle till your comfortable, then back down.com...
I'm gonna start a site/community called "We break stuff" where everyone has to purposely damage hardware by overclocking :D
:lol: I'd be a proud member... with a video or two to prove it. :lol: ;)
I think I may register that domain! I love it!:banana:Quote:
Originally posted by Kunaak
"OC alittle till your comfortable, then back down.com"
BTW Steve, (MrSpec) I knew you were a little looney, but 3.95volts! Looks like I need to try this booster in my P4C800-E to see just how high I can run my pc3200 Corshair bh-6. 3.95vddr sounds mighty fun:) Care less if I lost them, and don't want to try in my A64 rig as I am sure to take out more than the ram!
Did I just see a request for a CPU and video card voltage booster.
I dont think there is much need for a CPU Voltage booster, as most enthusiast boards now give you more than enough voltage and as CPUs mature require less voltage to OC high
HOWEVER...if you could manipulate the vcore vddr vref vtt on a videocard that would make for some spectacular results :) especially if it functions as good as the DDR booster...although this sounds near impossible...or is it?
Ryan,Quote:
Originally posted by ryanpgroovy
Did I just see a request for a CPU and video card voltage booster.
'grats on the great new product.... now if I can just FIND one!
C
wish i could also.but its a great prodct from what i am seeing s far.
Hey Charlie... you want mine? :lol:
The first time I went to use it... it fried my Epox 8KDAJ motherboard(hopefully my 3200+ is ok). I set it up just like the manual says(even though an idiot could set this thing up without any manual) and when I went to adjust the Vdimm... POP... SMOKE... Vreg D.E.A.D.. Funny thing is... I'm the one that started this thread and as fate would have it... I'm the first to use it for what it was created for. :lol:
I'm serious about you having my Booster. It will be a while before I get another A64 mobo and I don't feel like getting my XP-m setup back out to play with right now.
If you want it... it's yours.
It seemed to be working fine then at 3.2v POP!!! Which is funny since I could use a VR to get up to 3.5v(didn't try any higher).
Oh well... it's my own fault since the board wasn't on the "approved" list. :lol: :shrug:
ryanpgroovyQuote:
Originally posted by Jeff
It seemed to be working fine then at 3.2v POP!!! Which is funny since I could use a VR to get up to 3.5v(didn't try any higher).
Oh well... it's my own fault since the board wasn't on the "approved" list. :lol: :shrug:
Care to Comment on That?:confused:
I SURE as H*** don't want that to happen to my A8V/FX-53!
He's probably going to reiterate that the board wasn't on the approved list and that there may be a mod. that needs to be done for A64 applications...
http://www.xtremesystems.org/forums/...729#post501729Quote:
Originally posted by andyOCZ
I will be posting a "fairly simple" mod on bleedin edge soon explaining how to change the booster for use on A64 socket 754 with 2 sticks and on all NF2 in slot 2 as required.
Thanks Jeff,
In The Meantime, I'm Not So Much in a Hurry Anymore To Receive or Use That Item Until It Is Tested Further!:p:
I Want to be able to At Least Try out My New PNY 6800 Ultra Next Week Without Paying Another Grand($$$$) for a CPU/MoBo!:D
my sentiments exactlyQuote:
Originally posted by pc ice
im thinking vr's and mem mod's have worked this whole time...on most all board's not just what's on a list...so ill stick with the safe way''vr's;)
hey ice u get my PM with the questions?
Quote:
Originally posted by DarkManX_BG
LOL
Increase the voltage of a tool that's specifically made to increase voltage... I love this place :D
LOL...here here.
Its never ever enough man.
Tell me about it :DQuote:
Originally posted by Hell-Fire
LOL...here here.
Its never ever enough man.
Now we need a dryice container for the RAM :idea:
that would be just wrong
My own 'booster'
http://www.coolmods.com/blackice2/dd...hin-supply.jpg
Pumps out anything from 2.15v to 5v (adjustable)....Tis a switching supply that can supply 20 amps, doesnt even get warm...unlike the OCZ booster which uses a linear supply that gets toasty and unstable as ya crank voltage up very high (the regulators cant cope)
Nice... any pics of it 'in action'? :thumbsup:
http://www.coolmods.com/blackice2/sw...r-on-ic7-1.JPG
267Mhz cas 2-5-3-2 (dual DDR), 2 sticks of 512mb
is lookin prime stable atm :)