Printable View
I've noticed something very weird...
With setfsb i can change my fsb...but there's something wrong about the fixes...
I thing it work till the maximum fsb we can set by bios...
When i try to go up...i see the agp value changing...
Infact after few second Vpu recover comes up!
So i think we can keep agp fix only with 227Mhz fsb...above..no fixes..
i suppose...!!
cya
Kam
could be that the agp values are calculated from the fsb :?
what does the agp show when giong from 200 till 212
ontopic,
does the dirty punk v-dim work on this board
my corsair bh5 eats volts :banana3:
btw it is 18.00 hour @ this side of the world :hehe:
hi,
i've got an a7v880 rev 1.02, it use an LM324 for the vdimm, for the mod use the input 3- (pin9) to the GND, use an 50k pot (multiturn!) set it to 50k for start.
important, i've got some odd thing with the vdimm mod and my 9700p with 3.3v
bios cheksum error... but no prob with 3.1v (max 240 dc 1-1 2226), with an old nvidia gf2 mx 400, no prob with 3.3v, but it's the same as 3.1v (stock chipset cooling) , maxed out @270 400/266 same cooling.
i'm really septic about the "lock" with my 9700p and 250 fsb no go, with my gf2mx400 no prob, up to 270. the clock generator(ics94228) seems not supported any "lock" only 6/2/1 divider,hum perhaps i'm wrong ???
i'm using the 1009 bios, the mb is already sold
there is another LM324 near the dimms, it is used for the vagp i think.
another thing, with the ratio 400/400 and 200fsb and 1.5 vagp no boot (bios),
with 1.8v no prob, the vagp is used for the v-northbridge and the v-southbridge ? i think yes
voila, and sorry for my poor english :P