Printable View
These are better than my KHX3000/512-sticks. Currently priming at 243MHz@3,2v (2-2-2-11 timings) :)Quote:
Originally posted by saaya
done :)
sorry JenkaRiPS, never heard of that stepping, be sure to post the results if you get it! :D is it bh5 with the 309 stepping on it? if yes then its probably good stuff, the last bh5 usually was.
nice! please post the steppings and final results once your done!
Will do :)Quote:
Originally posted by saaya
nice! please post the steppings and final results once your done!
Haven't taken the heatspreaders off but best 2 sticks of 256MB XMS3500C2 individually do 252mhz 2-2-2-6 at 3.18v vdimm on AI7.
I have 2x 512MB OCZ PC3500 Plat LE BH-5 here benchable at 250mhz 2-2-2-6/7 at 3.18v vdimm with 60x38mm delta fan strapped on it :)
Have 2x 256MB KHX3200K2/512 @ 250mhz 2-2-2-6 at 3.28v vdimm on Epox 4PCA3+ rev1.1
all boards unmodded/stock
Quote:
Originally posted by eva2000
Haven't taken the heatspreaders off ...
:DQuote:
Originally posted by saaya
UPDATE: for those who are scared to take the heatspreaders off, click here and post the spd week infos (use aida32/sandra)
Loool nice one :D
unfortunately xms3500c2 bh-5 or ocz pc3500 plat le doesn't show week/date info in aida32 only kingston sticks do
4pcs ADATA 512mb 338WF 250mhz CAS2-2-2-5 at 3.32v dual channel i875 Epox 4pca3+ prime95 stable
2pcs Twinmos 512mb 314WE ECC enabled 250mhz CAS2-2-2-5 at 3.32v dual channel i875 Epox 4pca3+ prime95 stable
There are rumours that 256MB INFINEON PC2700 'USA' modules are made with Relabled winbond BH-6 memory, cause the chip looks 100% the same als CH-5,BH-5,BH-6 chips.
And...
The performance of those sticks are AWEsome :slobber:
I had 2x 256MB INFINEON PC2700 'USA', they do 250MHz 2-2-2-5 @3.3v. :banana:
At stock voltage (2.6v) they can run 200MHz @2-2-2-5.
Looks like Winbond performance...
Can someone confirm that they are BH-6 or Infineon memory chips.
http://www.xs4all.nl/~famchow/P42.4@...mem_494MHz.JPG
Wow... :slobber:Quote:
Originally posted by kakaroto
There are rumours that 256MB INFINEON PC2700 'USA' modules are made with Relabled winbond BH-6 memory, cause the chip looks 100% the same als CH-5,BH-5,BH-6 chips.
And...
The performance of those sticks are AWEsome :slobber:
I had 2x 256MB INFINEON PC2700 'USA', they do 250MHz 2-2-2-5 @3.3v. :banana:
At stock voltage (2.6v) they can run 200MHz @2-2-2-5.
Looks like Winbond performance...
Can someone confirm that they are BH-6 or Infineon memory chips.
http://www.xs4all.nl/~famchow/P42.4@...mem_494MHz.JPG
very nice.... :)
got some bh6 pc2700 value memory laying here.. if only I didnt kill it by smashing a smd (DOH)
Those babies went 234 - 2.5 - 5 - 2 - 2 at 2.9V
TwinMOS PC3200 (256MB) 3092E 253MHz 2-2-2-11 @ 3.3v (3.28v) DFI LP B Nforce2 ultra 400
KHX2700/512 (BH-5)
V57038
0306 P01
D328DW-50
201 Mhz FSB at 2.5-3-3- 5 and 2T on my Kt266a (obviously motherboard limited)
2.0-2-2-5 and 1T at 210 Mhz FSB on NF7-S ver2.
I haven't had the nForce board for much time (I got it last week) I should be able to go higher than the 212 as soon as I figure things out.
Also, I seem to have the only KHX2700/512 on the list so far.
2 stick of Kingston HyperX3200, both using BH5, stepping: 315WE. Click here for pic.
One of the sticks does 250Mhz 11-2-2-2 with 3.24V (haven't tested stability though), but the other one kicks me back to desktop at 244ish MHz 11-2-2-2 3.24V. Highest I've tested for stability is 240MHz 11-2-2-2 with 3.2V, haven't tested 241-242. Gonna play more with my ram soon though (after a 3.3V rail mod:D )
Hey saaya. Please update my KHX... the ones with the "?" and 260MHz... BTW those are 256MB sticks...
335WF x2
Sorry it took me a while saaya, but here they are:
2 sticks of 256M TwinMOS PC3200, stepping 23020. 246 stable, 256 unstable on DFI Infinity, 3.3v and 11-2-2-2 generic settings.
2 sticks of 512M Buffalo PC3200U, stepping 314WE. 245 stable, 250 unstable on DFI Infinity, 3.3v and 11-2-2-2 generic settings.
2 Sticks of 256M Kingston KHX-3200, supposedly BH5 or CH5, stepping 0306 P01/D328DW-45, 246 stable, 258 unstable in DFI Infinity, 3.3v and 11-2-2-2 generic settings.
I've never tried lax timings so these might go much higher if I did so. All 6 sticks run 3.3v 24/7 and have all run at max volts for the boards I had. The oldest sticks are the TwinMOS and have been at 3.2v or higher since I bought them in November, 2002.
6 sticks of KHX3000, D328DW-45 chips.... 4x mixed 0304 0305, and 2x 0304 0307 datecodes on them... 11,2,2,2,2.0;1,3,3,3,3,3,4;eefd;7/15,7/15,7/15 on DFI Infinity/LPuB boards.
3D stable 2 @ 240Mhz, 2@ 235Mhz, and 2@ 230Mhz (0307 chips)
5 of the 6 will do 250Mhz 3D stable tested individually, the 6th does 240Mhz. All 6 will do 250Mhz 2D stable benchs and prime.
wow thx for all the replies everybody! was a bit busy the last days, will update the db tomorrow. thx a lot! :toast:
lol sae :D took the heatspreaders off finally? ^^
:lol:Quote:
Originally posted by saaya
lol sae :D took the heatspreaders off finally? ^^
Yeah. First I was afraid to damaging these great sticks because of my sometimes dumb actions handling mods and hardware ;)
But I got it done, finally :D
heres some generic no name bh-5 314 we. @ 3.30
here it is.
whats the complete stepping? i need the two letters that usually follow after the numbers. thx :)Quote:
Originally posted by uwackme
6 sticks of KHX3000, D328DW-45 chips.... 4x mixed 0304 0305, and 2x 0304 0307 datecodes on them... 11,2,2,2,2.0;1,3,3,3,3,3,4;eefd;7/15,7/15,7/15 on DFI Infinity/LPuB boards.
3D stable 2 @ 240Mhz, 2@ 235Mhz, and 2@ 230Mhz (0307 chips)
5 of the 6 will do 250Mhz 3D stable tested individually, the 6th does 240Mhz. All 6 will do 250Mhz 2D stable benchs and prime.
i didnt add the kingston steppings, im only looking for the original winbond steppings as the other markings are not really saying anything about the production weeks and so far there are only speculations about the kingston stepping. but thx a lot anyways! :toast:
saaya, ... erm... my sticks are 256 mb sticks :D
oops :D
i added some other results i found on some japaneese forum, lol :D