here you go..
50k pot from pin 8 to gnd
http://www.home.no/dpa/Ftp/Bilder/asus%20card...JPG
my poor prescott got 1.856v yesterday :D
Printable View
here you go..
50k pot from pin 8 to gnd
http://www.home.no/dpa/Ftp/Bilder/asus%20card...JPG
my poor prescott got 1.856v yesterday :D
thank you very much ;)
that IC has TINY legs, so take it easy....
Could you possibly show us a pic of those extra mosfets and where you obtained them?Quote:
but also i have put 6 extra mofsets so the vcore power is very stable.
:eek: :slobber: :D
yep, show us some pictures of those mosfets.
Unfortunatly i don't have a camera but you can easily find the empty places near the vcore mofsets.Quote:
Could you possibly show us a pic of those extra mosfets and where you obtained them?
Yes my stepping is SL79A..:DQuote:
Is your stepping SL79A? Mine is SL79L an it dont overclock so good.. 4.35Ghz in R404 Mach II is super pi stable. Max pic stable is 4.5Ghz.
The empty spaces are:
- one in each power phase group (easly identifiable by the coils),
- one between the clock gen. and the AGP slot,
- one next to a fan header between the socket and the backplate,
- one between the PATA connector and the BIOS chip
What I would like to know is what specs. MOSFETs to use.
Are the numbers on this MOSFET in this pic the same as the MOSFET you added to your P4C800?
Are They the ones numbered 9918H?
http://www.a-power.com.tw/products_05.htm
Great work Aristidis, u pushed this one to the max, :)
Got any 3d links to compare ?
it seems like the SL79A is better than the SL79L...
OFCOURSE.. I have SL79L... BLAH..!
I Just checked on MY P4C800, and the Power MOSFET's for the P4 VRM are 60T03H(Three of them).
Are Your's the Same as Mine?:confused:
They show up at http://www.a-power.com.tw/ as being the ones for the Vcore, but there are Also Three others marked D0319, that are next to them.
Do you have the numbers off of yours that you used?
I just used the mofsets of a chintech 865 mobo that they are the same...
Did you just solder 3 extra mosfets onto the empty pads on the front of the board, then 3 more on the back?
To me it seems that the two empty MOSFET pads next to the fan connectors are for powering the fans only (the one for the CPU fan is actualy implemented) which would also explain their wierd voltage of 12V.
The one next to the AGP slot seems to be targeted at 3.3V and has probaly something to do with AGP port or MCH.
Yes....:DQuote:
Did you just solder 3 extra mosfets onto the empty pads on the front of the board, then 3 more on the back?
Could you please post the numbers on those mosfets.
Send a pm to Hipro5 ,...he knows
Great job Aristidi
I'm about to have my new P4C800E modded. Hell-Fire is going to help me mod the vdimm and droop mod.
Question for everyone, what other mod should I have done to this board beside those two mod? Please I need to know this before I start shipping out this board to him.
This system will all be on AIR and do you guy think it's necessary for me to have other mod done to the board beside the vdimm & droop mod. Any suggestion will be greatly appreciated.
Well i just need to know if i could use the one's on my broken P4C800 deluxe and since aristidis allready did the mod i was hoping he could answer my question.Quote:
Originally posted by shidokanjohn
Send a pm to Hipro5 ,...he knows
Great job Aristidi
Very impresive man, I should really look into vmodding my p4p800-e. :toast:
Quote:
Originally posted by snow
Well i just need to know if i could use the one's on my broken P4C800 deluxe and since aristidis allready did the mod i was hoping he could answer my question.
As far as i Know Hipro did the mods so thats why i told you to send him a pm:)
Áñéóôçäç öéäåìðïñáò åãé:banana:åò êáé åóõ ñå? :p:Quote:
Originally posted by shidokanjohn
As far as i Know Hipro did the mods so thats why i told you to send him a pm:)
well john i thought aristidis did the mods by looking at his replies...
i would like to know too cos i guess you just need to solder them on top of the "tracks" without the need of any..."drilling"? the board :D
Hahahahah, can't stop loughing brwmogazos....
Yeah, a little credit didn't hurt anybody, afaic....
Nice OC aristidis!!!
You guys never cease to amaze me :D