Geil PC3500 4.5ns Platinium

Printable View

Show 100 post(s) from this thread on one page

09-21-2002, 12:28 AM
BTBJP

Hipro can you run a bench with your ram at 247 CL2-7-3-3 T2 just to compare agaist OPP with his Geil
09-21-2002, 12:53 AM
sysfailur

Quote:

Originally posted by TheDude
And I just ordered a stick of xtreme corsair 3200 cas2:mad:

Heh you're not going to be unimpressed. That stuff pwns.
09-21-2002, 02:06 AM
hipro5

I'll do it right away for you man..... ;)
I'll be back in a few minutes with the bench.... :D
09-21-2002, 02:46 AM
hipro5

Yeap....I'm back again.....Now here you are : 512Mb Corsair XMS3200 C2 at Cas 2 - 3 - 3 - 7 T2....

As you can see....."same thing different day".....
http://www.hipro5.com/public/Benchie...m247_2_png.png
09-21-2002, 02:49 AM
hipro5

Now tell me....Can GEIL do 250MHz(500MHz DDR) at Cas 2 - 2 - 3 - 7 T2....???? :D
http://www.hipro5.com/public/Benchie...-2-3-7_png.png
09-21-2002, 03:21 AM
BTBJP

i guess not but all i need is 180fsb 3:4 for my 2.67b thing is can you run 3dmark at those speeds?
09-21-2002, 03:40 AM
hipro5

Quote:

Originally posted by BTBJP
i guess not but all i need is 180fsb 3:4 for my 2.67b thing is can you run 3dmark at those speeds?

I just haven't tried yet ....I'll do it for you TODAY......I've run PCMark2002 at those speeds....Go and check it out at Madonion's Data base(Project search and compare)....and IF I had a better VGA Card then the memory bench score of PCMark2000's would be MUCH BETTER cause this "stupid" benchie , ADDS the VGA score as well in it..... :mad:
09-21-2002, 05:41 AM
TheDude

Don't know if everyone has seen this yet, so here's a link to some reviews on the Geil 3500 ram. There is a very good one included by our own OPPAINTER.:D

http://www.geilusa.com/reviews.asp

BTW....my Corsiar XMS3200 c2 got here from the Egg and I was happy to see it is v1.1 :D
09-21-2002, 06:53 AM
hipro5

Quote:

Originally posted by BTBJP
i guess not but all i need is 180fsb 3:4 for my 2.67b thing is can you run 3dmark at those speeds?

UPDATED INFO...

I've done today a bench of 3DMark2001 with my memory 512Mb Corsair XMS3200 C2 at Cas 2,5 - 2 - 3 - 7 T2 and 250MHz(500MHz DDR)(couldn't do it at Cas 2-2-3-7).....with my poor GeForce4 440MX(not interested for something better than that cause I just don't play games)....at 188 MHz fsb and at 3571MHz
You can go HERE to check it out if you wish....Also now I'am at the TOP of 3DMark's score with the GeForce4 440MX in it's Data base....You can go at Project Search and Compare and you'll just see it(Select the GeForce4 440MX one).....The third score is also mine but with memory at about 241MHz(482MHz DDR) with Cas 2 - 2 - 3 - 7 T2......not much of a difference...

Now.....a friend of mine,Vaios, brought me a few days ago an ATI Radeon 9700 he just bought to test it.....but he took it back....He'll bring it to me next week(I hope) and WE'LL SEE what this VGA can do....

P.S. Thanks BTBJP for reminding me to bench at 250MHz(500MHz DDR)....Now I'm at the TOP of the 3DMark Data base for GeForce4 440MX..... :D :toast:
09-21-2002, 08:36 AM
sforza

Hello guys...:)

I'm planning on getting some memory, a 512MB stick. I have decided I want a XMS3200 stick, but wich one?? I saw listed at newegg several models but I don't know wich is the best one. The platinum heatspreaders sticks are only rev1.1. The rev2.1 has black HS. Wich one is better?

TIA.

/EDIT: of course is not for the mobo at my current sig :D
09-21-2002, 09:18 AM
TheDude

well...wait for others to answer also...but from what I've read in this and other posts..the v1.1 will handle higher volts. Since my KX7 has the memory volt mod, I was happy to get this version. I have not have time to try it yet and am waiting for my G4 to get back from RMA. What about it guys..is this correct?

btw....my v1.1 has black spreaders but it is clearly marked v1.1
09-21-2002, 02:13 PM
hipro5

Quote:

Originally posted by TheDude
well...wait for others to answer also...but from what I've read in this and other posts..the v1.1 will handle higher volts. Since my KX7 has the memory volt mod, I was happy to get this version. I have not have time to try it yet and am waiting for my G4 to get back from RMA. What about it guys..is this correct?

btw....my v1.1 has black spreaders but it is clearly marked v1.1

Yeap....That's the one...... :D
09-21-2002, 05:31 PM
terramir

I looked into geil great ram if you have a compatible system, forget it for AMD anyhow, note to hipro I see can you get your xms to work on these timings?
2.0-2-2 5-1-T1 ? at 200 I saw you had 2.0-2-2 7- t2@ 227 mhz let me know if you have the time to adjust your p 4 rig?
terramir
09-21-2002, 10:58 PM
hipro5

Quote:

Originally posted by terramir
I looked into geil great ram if you have a compatible system, forget it for AMD anyhow, note to hipro I see can you get your xms to work on these timings?
2.0-2-2 5-1-T1 ? at 200 I saw you had 2.0-2-2 7- t2@ 227 mhz let me know if you have the time to adjust your p 4 rig?
terramir

I'll post you tommorow cause I'm at home right now with my P3 1000.....:D
09-21-2002, 11:52 PM
s7e9h3n

Hipro:
All I can say is WOW! Now what exactly are you using to cool those chips?? I only can get my stick to 225 w/ relaxed timings.....=/
09-22-2002, 12:07 AM
hipro5

For the memory stick....pure air....I'll post a photo tommorow for you , to "laugh" with it's Modd..... :D
09-22-2002, 12:57 PM
sforza

Quote:

Originally posted by hipro5
For the memory stick....pure air....I'll post a photo tommorow for you , to "laugh" with it's Modd..... :D

I'll be waiting for that photo...It must me a serious xtreme-modding-cooling job :flame:
09-22-2002, 01:18 PM
TheHunter

Can't wait to see it... i'm still shocked u didn't fry it :D
09-23-2002, 01:39 AM
Trevor

I found this review of "performance memory" using, if I am right -7ns geil chips. I could not bable-fish it so I am not exactly sure what it says but the sandra results look good. I have attached a photoshop modified crop of the ram to get a better look at the chips.
http://www.hardware-test.dk/test_show.asp?id=1066

The http://www.performancememory.dk/ link shows it as just re-marked geil.
09-25-2002, 05:36 AM
psykes

Jep that seems to be true, but the 7ns chip is on the PC3200 geil, that is rated as slow ass PC3200. If you tjek the specs and benches for the PC3500 performance mem, you see som mad benchies!:D
10-03-2002, 07:41 AM
BTBJP

HiPro lets see the cooling then? What exactly have you done to your sticks?
10-03-2002, 12:23 PM
UaZa

BAhh 2 u :p

here is mine;
http://www.overclockers.kit.net/245.jpg

my cpu is holding..

2.92v, my it7 goes up to 3.23v ;)
10-03-2002, 01:00 PM
JPP

GeiL PC 3500 512MB

I am waiting for a stick to arive directly from taiwan next week.
Will see how it performes. :)
JPP
10-03-2002, 02:55 PM
UaZa

http://www.overclockers.kit.net/249.jpg
getting closer
;)
10-04-2002, 03:53 AM
Chong345

Jesus Uaza that is amazing stuff ya got there. I shoud have some platinum next week for testing.

Chong

Show 100 post(s) from this thread on one page