Printable View
yup was gonna say, ocuk have the 1.65v 2600+'s, the mobile 1.45 2600+ are the , well i think the highest 1.45v mobiles, highest i've seen available and only stateside. I would stick with a 2500+ but they aren't in stock maybe one sometime this week though.
Doesn't matter waiting for the 2500+ though as my dfi lan party is poo, unstable and 2 sticks of ram that have been fine till now are dead, bh-5, and can't find anymore around anywhere, so suckage. rma time.
dude, congratz, 3ghz relatively stable = awesome... very nice.
Cracking results there, also nice to see it able to play a game as well with that speed!
OT. As I live in the UK and am looking to buy a mobile barton, why are overclockers.co.uk not a good site? I dont want to pay by credit card and it be a dodgey thing!
Thanks, Anarki.
? for ya'll. I noticed that I cannot boot with a fsb higher than 215 with this chip. Anything higher and I get the damned sirens. I just booted at 200x15 with no problems. I had no problems with my XP2500 Barton (166fsb) running/booting in the 220's. Is there some kind of secret (pin mod, etc) for these chips to enjoy high fsb? Thanks.
:D
Pinmod good ;)
Pinmod for default 166 or 200fsb? BTW, this chip is pretty stable. I'm posting this screenie @ the below speed. Can you say smokin!Quote:
Originally posted by STEvil
Pinmod good ;)
WHOA!!! NICE OVERL:banana::banana::banana::banana:.
SMOKIN! ;)Quote:
Originally posted by AKRedneck
Pinmod for default 166 or 200fsb? BTW, this chip is pretty stable. I'm posting this screenie @ the below speed. Can you say smokin!
that is sick!Quote:
Originally posted by AKRedneck
Pinmod for default 166 or 200fsb? BTW, this chip is pretty stable. I'm posting this screenie @ the below speed. Can you say smokin!
is your prommy modded?
it's just a bone stock mach I. temps on the prommy are reading -27° as i play my game.. this chip is quite amazing. :DQuote:
Originally posted by Stang_Man
that is sick!
is your prommy modded?
http://www.xtremesystems.org/forums/...&postid=393041
HOLLLLLYYYYYYYY SHIIIIITTTTTTTTT
someone get this man a cascade
/edit pardon my french
pinmod works for chips that are 133fsb default only it seems, and its motherboard dependant.. some dont react to it at all whereas others do.
Before the pinmod I could get 210 max.. now I can get 236 :D
Oh man go son go son.
OK, 1 more until tomorrow.... :toast: I'm gonna do some pinmods tomorrow to see if I can get this sucker to boot at higher fsb. Sub 220fsb is just plain sad. :mad:Quote:
Originally posted by kommando
Oh man go son go son.
Nice! :thumbsup:
BUT:
I don't believe you 're getting far over 225 to 230 fsb stably... :(
Those mobiles do not seem to like high fsb's, especially over 250... mine did a bench at 260 but afaik there's nobody out there getting over 250 prime or 100% 3dmark stable (you can prove me wrong here of course ;) )...
But with a fsb that low you won't be able to cope with the top barton 3d scores for example :( . I get this superpi with nearly 200MHz less... as I do with pifast.
Try the mod, on nf7 you should benefit at least 5-15 MHz ;)
Good luck.
P.S. I want that cpu ;) :D
Omg, good work!!
is that why ive gone through 3 mobo's and nothign over 250 stable yet?....... wth.... does the infinity benefit fomr an L12 mod?Quote:
Originally posted by SAE
Nice! :thumbsup:
BUT:
Those mobiles do not seem to like high fsb's, especially over 250...
P.S. I want that cpu ;) :D
and gimme that cpu or ill key your comp.
Maybe we need to do the 200mhz fsb pinmod? Cant see why that would affect stability, but then again doing the 133 -> 166 pinmod shouldnt be messing with stability either... ;)
im game.. gimme a link/pic/whatever ill give it a shot this week.
This Pinmod is shown here...
Don't know if it would benefit you any thing, a friend of mine did the mod a gained about 1 MHz or so ;)
http://www.ocinside.de/go_d.html?/ht..._pinmod_d.html
Only choose 166 or 200MHz on top of the side, on the right.
Caution. You see the cpu is turned 180°... but you all are clever enough to check it yourselves ;)
awesome congrats dude :)
I took the socket off an old KT133A board I had that was dead and used a black pen to make a line for the 166mhz pinmod, and a red pen to mark the line for the 200mhz pinmod with the socket held next to the picture on the screen.. that way you know you have the correct orientation and you just have to refer to the socket to do the mod ;)
Good idea. I'm skeptical as to whether these mods alone will work. What other pinmods would be required to make the chip recognizable as a standard Barton I wonder? I'm trying to figure out how I could get this chip to show up as a 2500+ barton or 3200+. With this mobile, at present in the NF7-S, it shows up as unknown with multiplier of 5 and fsb of 100 after clearing cmos. Autodetect is unavailable. hmmm. :confused:Quote:
Originally posted by STEvil
I took the socket off an old KT133A board I had that was dead and used a black pen to make a line for the 166mhz pinmod, and a red pen to mark the line for the 200mhz pinmod with the socket held next to the picture on the screen.. that way you know you have the correct orientation and you just have to refer to the socket to do the mod ;)
Just started playing with my 2600 mobile, Lanparty and prommie. :D
not bad guys...
i have a week 48 that does 2.6 on air..
so it hink you guys should be able to get better then 3ghz i hope :)