great job tictac, looking forward to testing it once my rig is back up again!
:banana: :toast: :D
Printable View
great job tictac, looking forward to testing it once my rig is back up again!
:banana: :toast: :D
Im still gonna try this bios, hopefully it will work and perform well :)
Awesome work tictac, I tested 220 x 10, and it booted up fine and ran prime95 for 10 mins and failed after that.
However, any other BIOS I tried, even D10, would never even get into windows for me, so this is already much better. You are almost there dude!!!
I've never had problem with 10x on this board i got from RMA. I get higher fsb with 10x then 9x/9.5x with the original D19 bios. 230 2.06V Vdd so it isn't that good anyway ;) But amazingly better then the last board that did 225 out-of-the-box and this one did fail over 221 stock.
D10 made it worse and i loss FSB with CPU Interface disabled.. So i don't have any reason for trying another bios but great work anyway tictac :)
just pm uQuote:
Originally posted by G|-|oST
Awesome work tictac, I tested 220 x 10, and it booted up fine and ran prime95 for 10 mins and failed after that.
However, any other BIOS I tried, even D10, would never even get into windows for me, so this is already much better. You are almost there dude!!!
u may try thatversion too:toast:
Good stuff tictac.
Always been a fan of your work and all 3 boards I've owned have your BIOS on em'. :D
Would buy you a drink, if you were here. :toast:
I wonder what Abit engineers think of all this.
I never had a prob with the 10/10.5x mults. Never had to do the L12 mod either with my 266fsb cpu's......232 runs fine...2-2-2-11 cpu on DC...mem needs more Vdimm though
the only thing is that I cant use the D10 based bios's. The board hates those..
I have one of those boards too buff. Hates the 10 bios and it wont unlock my 2100(only 13 and higher)Quote:
Originally posted by buff
I never had a prob with the 10/10.5x mults. Never had to do the L12 mod either with my 266fsb cpu's......232 runs fine...2-2-2-11 cpu on DC...mem needs more Vdimm though
the only thing is that I cant use the D10 based bios's. The board hates those..
But i have this bios on both boards now. Works great.
so the new d10 that tictac made works better the 22BKing on the weird board?
Right now I am limited by Vdimm. If I could get higher Vdimm, FSB wouldbe higher.....
if it aint broke,dont fix it, right? :P
heres a link for the new bios, for those who cant get it.
D22-Alpha1.zip
http://home.comcast.net/~shrmytoon/D22-Alpha1.zip
Good Job.:toast:
Any idea when you gonna have a modded d14 bios, I love that bios, just the 10x/10.5x issue bugs me, lol
ok..... now my beta ingredients milking up This D22 Alpha1 :thumbsup:
here:
D22 ALPHA 1 BETAKING
Features:
- Base on D22 Alpha1
- SATA Bios Version :4227
- Beta ingredients : from betaking
DOWNLOAD LINK
http://forum.abit-usa.com/showthread...246#post276246
cheers:toast:
p/s: sorry never try changing other sip than d22..... :(
Here's some results of the AlphaBK... Im hittin new highs for myself at 230x9.5 CPU Enabled 1.7v/2.8v 2-3-3-11.. which I could only do 230 on old BK with CPU int Disabled, I couldnt get past 223 w/CPU Enabled. I got higher scores on sandra 04 mem benchmark 3078/2894 (AplhaBK) .. 3027/2794 (Old BK).. 3025/2786 (Old 3DFire) .. I also made gains on ATTO, PCMark02, HDTach, Winrar bench & Aquamark. I am compiling my results & will share them when done :)
btw.. those sandra04 scores are 200x11 CPU Enabled 2-2-3-11 APIC ON
@chilli
Firstly thanx for you results. I'm going to give it a shot.
I think your numbers are a little low for you memory and setup.
I get 3489/3179 when I run at 225FSB x10 multi
and 3489/3205 running at 240FSB x9.5 multi.
I hope TicTac can fix the low multi's (below x10) bandwidth problem.
1 of my forumers just post his result in my forums about
D22 Alpha 1
but not sure what multiplier he is running on... anyway 257MHz quite good fsb i would say :slobber:
TicTac, i tried the d22 with my nf7.. it doesn't like the new bios'.
it likes D10..
spice up the d10's :)
ya not all board like d10 or latest bios(d11-d22)Quote:
Originally posted by Stang_Man
TicTac, i tried the d22 with my nf7.. it doesn't like the new bios'.
it likes D10..
spice up the d10's :)
not sure if i can spice that D10 any higher... :(
another screenies regarding this D22 Alpha1 bios
we on the fast lane... :)
by Mr BroJason From Malaysia :toast:
Wow Tictac, you're getting some pretty awesome results in with this BIOS.:banana:
I'm going to try it for sure as soon as my KHX3000 turns up.
Just a question for everyone here though. Are you guys flashing from the bootscreen or are you using the ABIT FlashMenu program?
I have used the FlashMenu...the latest one (1.3-)...no problems
I really, really hope that any peeps associated with abit get to read this thread and other similar ones like it.
Abit should be ashamed and ashamed again, for months they have ignored, yes ignored the enthusiast market which has followed them for so long. How else would you call this 'problem' which has existed with a mothbrd of theirs which many, many peeps bought just to be tossed to one side because of this issue.
Ill stop now, i dont want anything more to be taked away from tictac and all the peeps who have been involved in helping resolve this 'issue'
tictac, you are a credit to your family and friends, I understand that u enjoy doing this type of stuff but I still salute you.
:toast:
Your intent is a enuff to show any peeps who tictac is, you inner spirit is exemplified in the work you have shown to the enthusiast communities around the net.
If peeps dont know; tictac's expertise is not only being used to fix abit's NF7-v2.0 bios, but is being put to good use on tweaking other manufacturers mthbrds.
Kudos to you again,
:toast:
All the best
mongoled
Does this mean no d14 with the 10x/10.5x multi's? :(Quote:
Originally posted by tictac
\
p/s: sorry never try changing other sip than d22..... :(
:D
:thumbsup: