Wow nice Splave,be interesting to know if you can do 2800mhz on the z87 with that chip or is the z97 board helping this ,If that is with no waza I'm guess z97 effieincy is awesome
Wow nice Splave,be interesting to know if you can do 2800mhz on the z87 with that chip or is the z97 board helping this ,If that is with no waza I'm guess z97 effieincy is awesome
I think its just the imc mate, I will try the same setup in z87 for you tomorrow
Awesome run Allen:up:
This round ASRock has decided to create just a normal ATX form factor board, so there will just be the large OCF not an M
I guess we got lucky since the M variant is listed on the site,also i think one of the few ones to support sata express in mATX format:
http://www.asrock.com/mb/Intel/Z97M%20OC%20Formula/
This time the m is not for extreme oc. :)
The M is listed in germany for 130 euros, it has no ln2 or slow mode switches, no debug LED and no power/reset switches as far as I can see, also it has 8 power phases, Z87 had 12 and all the former mentioned features - yes, this is not made for extreme oc
P.S. Good to see my old 17066 ripjawx are still alive, Allen :p:
Hi Nick,
you are welcome, the new z97 OCFM is priced much lower for start than Z87 was at launch, I think it is a solid board for the normal user with good features - on the memory, I was referring to the BBSE kit at start post, should be a 10520640 17066c8 RipjawX kit which I sold while ago to quake6 here at xs and which Allen showed a while ago ath some pictures - these are quite rare, normally blue bbse ripjaws have 17000 in spd
Unfortunatley this (the big OC Formula) is not listed at europe yet, at least at big price research website geizhals, but as far as I see at USA the board is priced very good
P.S. Sorry for the typo :)
I am european.. and I am thinking in buy an ASRock Z97 OC Formula + i5 4690K
Im waiting for ASRock Z97 OC Formula avaliable in my country.. hope for nice price like 200 euros
Someone here alredy buy this board??
Sam's rejects refreshed on Z97 :)
The sticks were never able to complete 32M at these clocks, just train and run 1M. The board loves vdimm and has no issues training with 2.2+v :D
LN2@all because with BBSE there is no other way and 2.25v on the memory, full pot but because these ic's run so hot the avg. temp was -115c to -120c and would warm up during load.
http://i.imgur.com/BJMlukK.png
quick 4G, but I suck at 4G what else is new lol
http://i.imgur.com/tOdJDPC.png
pics because everyone loves pics
http://i.imgur.com/kfHvrJB.jpg
http://i.imgur.com/9ItRB1M.jpg
http://i.imgur.com/hbNziFO.jpg
http://i.imgur.com/BTqV1IL.jpg
http://i.imgur.com/OxNeYAA.jpg
PSC next, hoping for 2800+
Nice frosty pics! :)
2.25V on BBSE is :shocked: :D
Wow BBSE so strong ,nice loud
Board and cold pics look good too
great job!
Bull I cant run 2800 on z87 tried today and failed to even train, same order of sticks same cpu etc.
websmile, the bbse is running nice 2666 8-11-7-22-88 all tight 1.92v 32m post soon
Hope yours arrives eventually man
bios is still very new.. maybe with some news bios.. new highs!
if you only use the PCI-E 1, you win someting in disabled in the switch the PCI-E 2, 3 and 4 ?
and someone can post decente home images of the board?
Great results Splave looking forward to test one Z87 oc formula still my fav sadly i have tri sli and wont boot it :/
I guess will be same on the Z97 oc formula i saw still 8/4/4
But for low volts on CPU and amazing mem clocks ASRock rules !
Yeah, still no 3-way SLI since Nvidia requires at least an x8 connection for each card in an SLI configuration. 3-way Crossfire X would work, though.
Hi guys, you were talking about imc. but how to judge whether it is a strong or weak imc? because for 4770k, most of them can go 3200+ on air with mfr..
Depends if you want high frequency or tight timings, some cant do both. 2666 8-11-7 on bbse and 2720 8-12-8 on psc seems to be a good imc for old ic's or run loose and try max mhz on mfr or samsung.
http://i.imgur.com/8LuQHCx.jpg
http://i.imgur.com/OVUDW5f.jpg
Benching like crazy for 4 hours, hw never let me down.