Printable View
Mint users, good news and bad news.
Usually I do not look though the list of updates in the update manager. Today I did and noticed boinc, boinc-client and boinc-manager all in the list. Version 7.0.65. Very nice for MInt. Very bad if you have updated to 7.2.28. Make sure you uncheck those if you are at 7.2.28 and want to stay there.
EDIT:
Found a solution to this in post below.
Alternatively, just let the update run so it doesn't pester you again and go through the manual update procedure right after.
To stop Update Managers from updating your install of boinc:
Mint:
Open Update Manager click on Edit>Preferences>Ignored Packages tab
Add boinc, boinc-client and boinc-manager each separately and click apply. Close and Refresh.
http://img.techpowerup.org/131130/Selection_002.jpg
For Ubuntu, I have not seen Boinc show up in Update Manager , but if it does on yours:
Command line:
Via GUI Synaptic Package Manager:Code:sudo apt-mark hold boinc boinc-client boinc-manager
http://img.techpowerup.org/131119/h137z.pngQuote:
1 - Go to Synaptic Package Manager
2 - Enter [package name] into the search field
3 - Highlight the installed package
4 - Click on Package on the top row
5 - Select Lock Version
Done, now [package name] will no longer be updated.
http://img.techpowerup.org/131119/MP8NZ.png
New new version of BOINC: 7.2.33
Seems there were a few "Oops!" -es with 7.2.28: ( http://boinc.berkeley.edu/wiki/Release_Notes)
-----------------------------------------------
Summary of new features 7.2.31------------------
Fix: Disable downloading of images in notices. It was crashing BOINC Manager.
Summary of new features 7.2.33
client and manager: the set_cc_config and get_cc_config GUI RPCs had nonstandard replies, which weren't parsed correctly by the calling code.
OpenCL support for CPU
BOINC 7.2 has OpenCL support for CPUs, but this does require that you install OpenCL drivers for your CPU.
Surely 7.2.28 should have been classified as "Development", not "Recommended", Versions, though some non-WCG projects may have been sweating on the OpenCL support for CPUs.
And I wish they'd fix some of the basics, instead of the esoterics. Like:
- Give ability to copy text of selected tasks in BOINCmgr's Advanced View Tasks tab. Useful for reporting things to project fora.
- BOINCmgr sort order of displayed tasks: Where tasks have equal values in the column selected for sort ordering, eg 0% complete, leave listing of tasks in order received, which is the default order in which they will be run. Usually this is the case, but occasionally it sneakily rearranges some to be out of order, a PITA if you're micro-managing.
Workaround: Hitting Ctrl+Shift+V (switch to simple view), then Ctrl+Shift+A (back to advanced view) puts tasks back in order - for a while.
- BOINC client to make sensible choice of which running task to suspend on occasions when it decides to suspend one, eg to run another task under High Priority, or to comply with a reduced <max_concurrent> directive in the app_config.xml file. ATM, it grabs the qualifying task that has the highest % complete, but surely the task(s) with the lowest % complete or longest estimated completion time would be the best choice. On startup, it gets the choice right (priority to run the tasks at the opposite end of that order). The prioritising code is there for startup - they just have to apply it again when suspending, but this time choose & suspend the task with lowest priority to run instead of the highest. [/rant]
[rant back on] And somebody please grab Fugger very firmly by the throat and squeeze hard until he increases the auto-logoff timeout for this forum. I hate being logged off several times while I'm composing posts :mad: [/rant]
I had 3 PCs on 7.2.28 and have not had any problems but the ones on 7.0.65 will stay there. One of the 7.2.28 will go to 7.2.33. Should have just stayed at 7.0.65 as never saw any benefits to upgrading anyway.
EDIT
I take it back. One Windows PC has had E@H scheduling issues ever since I updated the Boinc. Rollback time.
I have successfully unpacked a boinc-client .deb file, upgraded the binaries and repacked and then installed. It works. Also not really different from just installing from repositories and downloading new version from Berkely and moving the binaries, just a lot more steps.
IMHO the best way is the first in the thread. Certainly the most straight forward.
How to replace binaies in a .deb file:
Pull out the files in data.tar.gz in archive boinc-client_7.0.24+dfsg-1_amd64.deb
You will see 3 directories: ./etc, ./lib and ./binCode:ar p boinc-client_7.0.24+dfsg-1_amd64.deb data.tar.gz | tar zx
copy boinc and boincmd from Berkely archive to ./bin/
create new data.tar.gz with the three directoriesCode:cp ~/BOINC/boinc ./bin/
cp ~/BOINC/boinccmd ./bin/
Now replace the data.tar.gz in the .deb package with the new one you just created.Code:tar -zcvf data.tar.gz ./etc ./lib ./usr
InstallCode:ar r boinc-client_7.0.24+dfsg-1_amd64.deb data.tar.gz
Code:dpkg -i package-name-here.deb
If there are problems purge installation and all config files and directories created by install.
Or just remove startup scripts and binaries leaving project files and directories.Code:dpkg -P package-name-here.deb
Boinc should start on bootup and use /var/lib/boinc-client for project files.Code:dpkg -r package-name-here.deb
To see the contents of a .deb package.
Code:lesspipe boinc-client_7.2.33+dfsg-1_amd64.deb
FYI ia32-libs has been replaced with lib32z1.
Quote:
Package: lib32z1
Priority: optional
Section: libs
Installed-Size: 169
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Source: zlib
Version: 1:1.2.7.dfsg-13ubuntu2
Replaces: ia32-libs (<< 1.5)
Depends: libc6-i386 (>= 2.4)
Conflicts: libc6-i386 (<= 2.9-18)
Filename: pool/main/z/zlib/lib32z1_1.2.7.dfsg-13ubuntu2_amd64.deb
Size: 55674
MD5sum: 093c3ecb54beeb8e712e0b0278ea1233
SHA1: 5bef167658c3206974fde5321942ca17d9d6fa42
SHA256: f58894d25b8ba6914623eaad69b2b4243655ffa463faa488db 2a01897ba5ad84
Description-en: compression library - 32 bit runtime
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This package includes a 32 bit version of the
shared library.
Homepage: http://zlib.net/
Description-md5: 8844cb824b8b6f7b621a350ef76f732a
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Origin: Ubuntu
Supported: 9m
For those that have boinc installed in the $HOME directory from archives gotten from Berkely I found a prebuilt init script to start boinc on bootup. You will need to look for
BOINCDIR=/var/lib/boinc and BOINCEXE=/usr/bin/boinc_client and set the directories to where boinc is installed and where the boinc-client is installed. I would assume it would be /home/yourusername/BOINC. There are also some other settings you need to look at. BUILD_ARCH=i686-pc-linux-gnu is for 32 bit Linux, BUILD_ARCH=x86_64-pc-linux-gnu for 64 bit.
Info and instructions Installing and Running the BOINC client on Unix Scroll down to 3.4 Get BOINC to start automatically
I have not tried out his instructions but they look good and should work.
Consider the thanks button pushed....twice :)
Yeah I thought of you when I saw it. I am sure you can get it to work. :up:
:toast: