thermalright sp-97... ;)Quote:
Originally posted by saaya
get the termaltake heatsink with heat pipes! should give you at least 5°C lower temps!
Printable View
thermalright sp-97... ;)Quote:
Originally posted by saaya
get the termaltake heatsink with heat pipes! should give you at least 5°C lower temps!
Prommy doesn't always have to gain more Mhz, I know enough people which didn't even gain a Mhz with Prommy.
And why should I be jealous about that system, I bet there are enough others out there with more Mhz, who cares ..
Well, it's also not nice to LV. Obviously he's very proud of it and then you come and say it's nothing. Why?Quote:
Originally posted by sai
Prommy doesn't always have to gain more Mhz, I know enough people which didn't even gain a Mhz with Prommy.
And why should I be jealous about that system, I bet there are enough others out there with more Mhz, who cares ..
Just my 2 cents.. ;)
Well it's not my intention to frustate someone :stick:
Yah i agree,
Sai man this guys achievements are very impressive, stable or not. Show a little respect at least; even if you dont think it is a great achievement.
Go and find other peeps who have ran a amd chip k7 chip @ 2800mhz on air then at least u can back up what u are saying, i very much doubt that u will.
enuff said.
Yo LastViking, i know u must have frozen your nuts off their to get that overclk, congratulations dude
:toast:
I won't find many probably because of not many boards have 2,2v for cpu :rolleyes:
u know guys, u can really look at it both ways... achievement or not...
some would probably even disagree it's "pure air"... it might be just like saying that one has pure watercooling when in fact one cools with chilled watercooling setup. sounds about the same but it's not...
if that baby is prime95 and 3D stable then it's great achievement but it would be even greater if it was on "normal" room temeperature 18-22C and able to keep it 24/7 year round...
my system is rock solid at 2604mhz. it's doesn't even run hot - max 45C while priming... it's "fairly" stable at 2640mhz... it hangs at logon at 2700mhz...
personally, people, show off your STABLE results... otherwise it doesn't have any practical or educational value...
happy OCing,
EDIT: i'm not saying anything here, just to show you what can be done with 8rdavcore for NF7-S... just while we're all waiting for some stability proof...
http://www.speakeasy.org/~michasmisi.../2700small.jpg
K if you think it´s so easy then show me you cane do this self....You have almost same stuff like me why can´t you run @10x280?"2800mhz"..Show me anyone who have done "280fsb + 2800mhz , aircoled , nf2" .. if you found one another then me i think this my overclock sucks...but a have not maxed yet..Sisandrabenchen will come later on...working to much know.Quote:
Originally posted by sai
I won't find many probably because of not many boards have 2,2v for cpu :rolleyes:
And my board don´t have 2.2v in bios......i think only NF7&AN7 have it...(2.3v)
But i cane show somemore pics modds and more..
And this post was for showing that this board don´t problem like many another boards(you cane run high fsb with high vcore and high cpu speed"
One more thing..I don´t think i cane do 280x10.5 yet... And i cant run so much higher fsb..so next step is to higher multiplier but then i cant run my max fsb....So the cpu is not maxed in this screen...but fsb is almost that maybe i cane run like 281,282 but i think is very hard..So the Cpu is not maxed!
sure, it's not easy... vcore mod, vdimm mod, psu mod... that takes time and effort...
but keep in mind that u have good BH-5 and u feed it with almost 3.6v! ... and then there is this "cold air" thing....
besides, before everybody gets excited - and u too :-) - please prepare some stability screens and benches maybe... coz like i said if it's not stable then it's useless...
and btw, sandra is not a stability proof... i can bench sandra at 236FSB but it's nowhere near stable besides that...
if u could post links to 3DMarks and AM3 then i say it's awesome overclock... ;)
yeah, I'd like to see some 3dmark scores too. What card are you running? r9800p?
K i don´t have any 3Dmark2001 screen yet.. but i have runed @270fsb in 3Dmark2001. And 2620mhz@2.0v...but i think 280fsb is to high without any more modds..And 2800mhz"150watt"+ cane be hard with aircoling in 3Dmark2001...I have one screen @268Fsb in 3Dmark2001.. But if anyone have runed so high like 270fsb+ in 3Dmark2001 with NF2 i think my overclock sucks...But give me some screens first...Quote:
Originally posted by bachus_anonym
sure, it's not easy... vcore mod, vdimm mod, psu mod... that takes time and effort...
but keep in mind that u have good BH-5 and u feed it with almost 3.6v! ... and then there is this "cold air" thing....
besides, before everybody gets excited - and u too :-) - please prepare some stability screens and benches maybe... coz like i said if it's not stable then it's useless...
and btw, sandra is not a stability proof... i can bench sandra at 236FSB but it's nowhere near stable besides that...
if u could post links to 3DMarks and AM3 then i say it's awesome overclock... ;)
I cane post the screen @268fsb...but that score sucks...used WinMe and not tweaked. If you want to see it then i post it..
is 268FSB totally stable? i mean, suitable for everyday use - benches, games and so on... coz i think that's what counts, right...? what would be the point of keeping the system at settings that are not stable whatsoever...
i just think that this race between, say, you, xDUCK and Shroomalistic in search of the highest FSB no matter what stability is just little bit pointless... u should just stop posting unless u can back it up with links and screens... just my two cents...
"Taco" did Super PI @ 2,8G with aircooled Duron 1600. But that's the highest AMD on air I've seen.Quote:
Originally posted by mongoled
Go and find other peeps who have ran a amd chip k7 chip @ 2800mhz on air then at least u can back up what u are saying, i very much doubt that u will.
very well Lastviking
dfi rulezzz :toast:
Bachus, man would you just chill. Rather than diss him for not putting up stable screenies, just ASK him what he's able to do 24/7 stable. Benchmarking is not about 24/7 stability, it's about being stable enough to finish the test.
If you're wanting a Prime screenie, just ask, I'm sure he'd put that up when he has time to find what's stable.
i don't mean to put up anyones fire but searching for the highest although not stable FSB is not benchmarking... that's why i asked:Quote:
Originally posted by BMORIN
Bachus, man would you just chill. Rather than diss him for not putting up stable screenies, just ASK him what he's able to do 24/7 stable. Benchmarking is not about 24/7 stability, it's about being stable enough to finish the test.
If you're wanting a Prime screenie, just ask, I'm sure he'd put that up when he has time to find what's stable.
so far we don't know if that 280x10 is capable of doing anything else than just WCPUID screen... if i would like to show off my highest OC then i would just prepare for that with set of benchmark's results and screens to avoid getting post from people like myself ;) being little sceptic about usability of particular OC.Quote:
is 268FSB totally stable? i mean, suitable for everyday use - benches, games and so on... coz i think that's what counts, right...?
also, how could u benchmark with 3DMarks, AM3, SuperPI or PIFast if system is not stable...?
once again, i don't mean to do any harm to anybody... i think it's the best forum with most experienced members...
"If you can't say something nice, then don't say anything at all"Quote:
Originally posted by sai
Well it's not my intention to frustate someone :stick:
;)
Quote:
Originally posted by bachus_anonym
is 268FSB totally stable? i mean, suitable for everyday use - benches, games and so on... coz i think that's what counts, right...? what would be the point of keeping the system at settings that are not stable whatsoever...
i just think that this race between, say, you, xDUCK and Shroomalistic in search of the highest FSB no matter what stability is just little bit pointless... u should just stop posting unless u can back it up with links and screens... just my two cents...
http://upl.mine.nu/uplfolders/upload4/3dmark268fsb.jpg
This was long time ago..And i don´t want to run prime @ higher vdimm than 3.3v+ . And i don´t wana higher my timings........So i give you only 3DMarks.. 24/7 use is one thing.. Highest on Orb is one thing"Maybe you think they run Orb speeds @ 24/7?!". So cold down plz i work 2 much so don´t hurry...I give you higer fsb+cpu speed in 3Dmark2001 when i have time....And highest memmory bench is one thing. I don´t OC becuse of high 24/7 speeds...
http://upl.mine.nu/uplfolders/upload9/sisoft280.jpg
You are looking for high 24/7 speeds but i´m are looking for high fsb speeds in sisoftsandra..."I like mc you like cars", "I like Red you like Green"
:stick:
there u go :) and i saw those screens before, i think... i'm happy now ;)
i wouldn't want u to run 268FSB/2.55ghz at 3.62v day 'n night and i know that ORB or ARC is not about 24/7 setups... when u r able to complete all those benches that's enough. it proofs that it's stable but doesn't necessarly mean u need to run it 24/7 even though it's capable of it...
i wish u good luck in getting this 280x10 stable enough to submit results to ORB and ARC... :toast: i'm looking forward to seeing that
stay cool ;)
I thought there was many differant facets to this sport.
Some just want to play games at theyre maximum settings.
Some want to get more performance for their money.
Some the highest FSB, or highest Mhz, most bandwidth.......
The list goes on, its not for any one person infact not for anyone to say what is and isn't worthy of posting.
We may all differ in our interest, if this doesn't interest you, because it doesn't fit in with your notion of whats a achievement and what isn't. Why not go and find a thread that fits, don't knock the mans achievement.
'suitable for everyday use - benches, games and so on... coz i think that's what counts, right...?' Wrong, by that reasoning what do you make of OPP's top score on the ORB do you really think he could use that setup for 'everyday use' running like that ?
The best or amongst the best of anything is a great achievement.
TDF.
edited the dyslexic bits.
good results m8, cant w8 to see the new results, dont worry about some others, like u said your basically playing 2 different games
Dave
Keep up the good work lastviking!!! :toast:
It's awesome to even reach these FSB speeds, if stable or not! One has to keep in mind that even taking a screeny at 280 MHz FSB surely needs some percentage of stability that has to be reached by others before complaining about your results! ;)
It's not hard to complain, but it's had to compete! :D
You sure did DFI a favour and I was thinking about buying one of those infinity boards just from the moment I saw your first thread, showing over 260MHz FSB on that nf2 board.
You got better and better results and many fellow overclockers must try to keep their hands away from their mouse, whenever coming across an "order" button for a DFI Nforce2 Ultra 400 Infinity or Lanparty B in a online shop. :D
greets
Ingmar :)
I know I already told you this, but congrats on the OC mate. You are a true enthusiast among enthusiasts. :toast:
yah, just to reiterate, AWESOME OC man. youre giving me hope that my nF2 mobo could go that high, lol.
also where did ya get the proc, and did ya do any unique mods like hipro does? if so could ya post em
Whoa holy §§§§ nice clocks. Damn cold weather its seriously hot here.