Printable View
Forum is for discussing ideas (related to subject), it is far more boring if worklong contains only pictures posted by author and in average one sentence per post comments how awsome his work is, really. Plus I have nothing else to add so "OT" is over anyway, hope my ideas will just put some more light on rad mounting options in that particular case.
Talk about jumping the gun!!!Quote:
Originally Posted by aerial
My point was a few of us might like a thread on this topic/case!!! :shakes:
On topic: I can not wait to see the finished project :up:
you can use microres swiftech and mount it at the other side of psu, and are you sure that the rear gpu not gonna fit in inside the case?Quote:
Originally Posted by aerial
you probably going to see dual 360 + 120 in this case in next couple of days/week(still have one unused 120 rads :rolleyes: )Quote:
Originally Posted by Tetrafluorometh
noooooooo :shocked: I must find a way of fitting another dual rad in there... /sQuote:
Originally Posted by hillywav
I look forward to seeing that if you manage it but for my build I really want all the cooling to be internal, again I am using what I feel is necessary not trying to fit as much as possible in there. :rolleyes:
@ aerial I have considered a vast number of radiator configurations and for my build this is the best solution for me :up:
have not decided on the colour of my loop its between swiftech hydrx (uv green) or feser one (uv blue) would realy like some opinions on this and if chipset cooling is essential or not... :confused:
I will try to get some more pics up later today :cool:
IMO UV Blue...Quote:
Originally Posted by Psyco
Chipset cooling normal not needed (Just for looks), In a limited amount of builds/cases yes it does help, In your case with the airflow and amount of hardware it just might not be to bad of an idea :shrug:
Although it will add some more tubing to your build :shrug:
Just my 2cents!!! I know what my temps are using the same case and if I could add a chipset block I most likely would. LOL
ufft feser one, donotwant :cord:Quote:
Originally Posted by Psyco
you probably wanna see snipe dog thread about his loop filled with feser
by the mean chipset, you mean Northbridge isn't?Quote:
Originally Posted by Crazy V
NB chips at lga 1366 run awfully hot
Just found that thread, not a pretty sight, any recomendations :confused: as I say, I have never had water cooling before.Quote:
Originally Posted by hillywav
Just a couple of pics of the Rad cutout for tonight
with masking tape:
https://lh3.googleusercontent.com/_V...cut-Bottom.png
and without... much neater :rolleyes:
https://lh3.googleusercontent.com/_V...t-Bottom-2.png
burnt through 2 cutting discs in the process, should really get a pic of those :)
colored UV tubing + distilled water or distilled water + mayhem wc dyes :confused::confused:Quote:
Originally Posted by Psyco
+1 :up:Quote:
Originally Posted by hillywav
already got some clear tubing so it has to be dyes, that deep blue dye looks awesome, considering mixing it with some blue uv... The name of these dyes would seem a perfect match for my project, a total coincidence, honest :DQuote:
Originally Posted by hillywav
looks like the shop is closed until Mike gets well, I hope he is ok :(, I have a lot to do before I get the dye anyway...
Well its been a while and I have made a lot of progress... been very busy with university work which is my poor excuse for the updates
first thing to get done was the powder coating, I found a place in manchester that would do it for a pretty decent price and I think it came out looking great
before:
https://lh6.googleusercontent.com/_V...ore-powder.png
after:
https://lh6.googleusercontent.com/_V...er-powder2.png
Some part pics:
https://lh6.googleusercontent.com/_V...4/delivery.png
someone very kindly sent me a sceond mcp655 instead of the pump top i ordered... :) always nice to have a spare.
https://lh5.googleusercontent.com/_V...spare-pump.png
bp fittings, shiny as always :)
https://lh6.googleusercontent.com/_V...aJCHnY/bp1.png
https://lh3.googleusercontent.com/_V...SApUYI/bp2.png
shiny ek blocks :)
https://lh5.googleusercontent.com/_V...group-shot.png
soldered the wires for the top rad together:
https://lh6.googleusercontent.com/_V...7eY/solder.png
dropped the cpu into the socket..... :shocked:
https://lh4.googleusercontent.com/_V...bent-pin-1.png
not to worry, some tweaking and poking later:
https://lh6.googleusercontent.com/_V...Q/tweakery.png
and fixed :cool:
https://lh5.googleusercontent.com/_V...RFnM/fixed.png
well, close enough
shot of gpu:
https://lh5.googleusercontent.com/_V...tgoJE0/gpu.png
https://lh3.googleusercontent.com/_V...zxLWlQ/rog.png
https://lh5.googleusercontent.com/_V...test-fit-2.png
leak testing:
https://lh4.googleusercontent.com/_V...ak-testing.png
as it turns out one of the right angled connectors was broken :(
https://lh4.googleusercontent.com/_V...7w/leak%21.png
solution... remove 90 degree connector:
https://lh4.googleusercontent.com/_V...2ySus/gpus.png
and finally one of the powder coated fan controller:
https://lh4.googleusercontent.com/_V...controller.png
system up and running now, not yet finished, more pics coming soon :)
Looks great so far! Good job! :up:
Looking forward to more pics! :yepp:
Are you considering doing some sleeving?
I'm not going to be individually sleeving cables, I don't have the space. I have sleeved the front buttons/led cables and fans for the top rad but as most of the cables in the build are hidden away there is not much need
A quick pic to show off the awesome work done by the guys at macclesfield laser:
https://lh5.googleusercontent.com/_V...52/offside.png
would not have been able to do it that neetly by hand :) though the idea is stolen from coolmiester and his insane project: SR2 Stacker.
I had never inteded this to be a contest, the reason behind 2 360 rads is in the pursuit of silenceQuote:
Originally Posted by aerial
here are some pics of the complete nearly build
side + window:
https://lh6.googleusercontent.com/_V...%2B-window.png
another side shot, no panel this time:
https://lh4.googleusercontent.com/_V...d50RQ/side.png
front of case without pannel:
https://lh6.googleusercontent.com/_V...front-mess.png
Cool build. It turns that using mini-atx motherboard changes everything, sli has enough space below top radiator in this setup, also you have much easier time to connect everything to motherboard. Full atx, would be stuck behind rad, and it is real pain to reach pins on mobo (usb/power ect).
I'm not quite sure about power supply. If you would use 240mm rad on bottom instead 360, it could get away with much less modding, at quite low cost (just 1x120 less rad surface), so not sure if it was worth it, considering that part of radiator doesn't have much space for air anyway.
Still very nice and clean. It shows that it is really worth to go with mini atx in this case, if we are going for water cooling.
I can see your point however looking at the case head on with the power supply on the far left and one of the hard drives on the right there is a resonable gap between for airflow through the rad.
This motherboard is still not ideal, as i have had to move one of the hard disks to the second cd bay as the bottom gpu is so low. which must be impeding the airflow to the top rad a bit.
the gigabyte ud3r would not fit sli, there would be no room for tubing + top gpu would block top rad alot.
the matx board has not helped as much as it could... i accidentally pluged the power switch into only on of its pins, fortunately nothing else :) but can't move it with my fingers, will need to get the plyers on it when i have a moment, lucky I can reach the onboard switch and i dont have a window yet :P
Ideal motherboard would have gpus in slots 2 + 4 (gene 1 + 3 , ud3r 3+5)
This is like, really really impressive stuff dude.
wow.
amazing. looks like you may need a shoehorn to get it all in there.
awesome, good job bro
thanks guys, hillywav in particular your build helped to convice me this was possible :)
I have got all the sound dampening fitted and side pannel in place, I need to get round to taking some more pictures.
The yate loons are louder than i had hoped, they have a rumbly/grating/ticking sound... but im being very picky as it is a lot quiter than my previous builds.
Temps are pretty good but 480s can still get damned hot (^90C :o) if i forget to turn the fans up when gaming
your case is great, but could you take some pics thaty are not so macro intensive?
I wanna see the full picture...
Attemped to upgrade the fans to gentle typoons and in the process have punched holes through both the rads... stupid nooby :( can't see the mcr 320s in stock anywhere in the uk anyone have any suggestions for alternatives with matching dimensions/hole spacing/performance ???
OMG! I'm so sorry for your loss...Quote:
Originally Posted by Psyco
Now I understand the warning letter included with the radiators...
You just want to buy from UK or any other EU store is fine?
Your build looks great btw :)