"V2" Koolance *Dual D-5* Bay Reservoir! (RP-452X2)

Quote:

---

Originally Posted by Andrew149

I received this Bay res yesterday and im having issue's with the directions there really bad. Other issue i have 2 pumps in the res and guess what the you cannot run the pump in series after i just paid $120 to do that. connecting the in and out with 90s fittings do not work because the in and out are so close together im not happy with this product at the time

---

The instructions illustrate installation of the pumps (one or two) and describe combining and separating the front reservoirs. However, it does not go into detail on parallel vs. serial loops, benefits of each, etc.

There's several ways to do this. You could come straight out and loop the tubing back (use spring wrap to avoid kinking). You could use our NZL-LXG's with a sliding CNT connecting nozzle. The easiest method was already mentioned, though:

Quote:

---

Originally Posted by Koolance

[*]To assist with loop-backs on the rear of the product, we will be releasing some new sliding 180º connection nozzles soon.

---

These will be curved pipes, so less pressure drop than with traditional 90's. I'm hoping we'll have these available within the month.

Tim

Martin posted a handy picture illustrating different flow options for the RP-402X2, which is essentially identical in terms of configurations:

http://www.xtremesystems.org/forums/...5111&page=2#49

Tim

Quote:

---

Originally Posted by Koolance

The instructions illustrate installation of the pumps (one or two) and describe combining and separating the front reservoirs. However, it does not go into detail on parallel vs. serial loops, benefits of each, etc.

There's several ways to do this. You could come straight out and loop the tubing back (use spring wrap to avoid kinking). You could use our NZL-LXG's with a sliding CNT connecting nozzle. The easiest method was already mentioned, though:



These will be curved pipes, so less pressure drop than with traditional 90's. I'm hoping we'll have these available within the month.

Tim

---

Okay can you put together a list of what actualy works i really want the correct peice that was supposed to be made for this res and also i have thicker tubing from feser 1/2 3/4

Can I use this using just a single pump/res?

Quote:

---

Originally Posted by Ravynmagi

Can I use this using just a single pump/res?

---

yes

I love this - great design :D

Tim bit OT, but what coolant is used in the display pic ??

Quote:

---

Originally Posted by Andrew149

Okay can you put together a list of what actualy works i really want the correct peice that was supposed to be made for this res and also i have thicker tubing from feser 1/2 3/4

---

You'll only need one fitting when we get our curved pipes. I'm not sure which one yet, or what the part numbers will be, but we're working to get these out ASAP.

Quote:

---

Originally Posted by Johnny87au

Tim bit OT, but what coolant is used in the display pic ??

---

They're our liquids, but the purple is Photoshopped from red (didn't want a Christmas theme). We've mixed our coolants before to get bright purple and orange, but we didn't have enough time to do that for launch. 99% of our demand is for R/G/B, yellow, & clear, or I think we would offer orange and purple too.

Tim

http://img153.imageshack.us/img153/3153/photo58b.jpg

Uploaded with ImageShack.us

installed pic

Quote:

---

Originally Posted by Koolance

You'll only need one fitting when we get our curved pipes. I'm not sure which one yet, or what the part numbers will be, but we're working to get these out ASAP.



They're our liquids, but the purple is Photoshopped from red (didn't want a Christmas theme). We've mixed our coolants before to get bright purple and orange, but we didn't have enough time to do that for launch. 99% of our demand is for R/G/B, yellow, & clear, or I think we would offer orange and purple too.

Tim

---

do you have a eta or a time frame i have my 2nd pump just sitting here lonley :down:

Andrew 149, Definately need some colour in that sexy res :D

Tim,
Do you have plans for making plain reservoir version of this bay reservoir, without pump integration?
Thanks

Quote:

---

Originally Posted by Andrew149

do you have a eta or a time frame i have my 2nd pump just sitting here lonley :down:

---

I'm estimating 2-3 weeks. We'll have 3 different length options.

Quote:

---

Originally Posted by wanderer256

Tim,
Do you have plans for making plain reservoir version of this bay reservoir, without pump integration?
Thanks

---

Yup, a few other models are being worked on.

Tim

Quote:

---

Originally Posted by Andrew149

Okay can you put together a list of what actualy works i really want the correct peice that was supposed to be made for this res and also i have thicker tubing from feser 1/2 3/4

---

I just got this in and it is great. MUCH better than the frozen Q POS I'm replacing. BP 1/2"-3/4" compression fittings fit just fine.

Question for those who have this res, and are running with 2 pumps: How is the noise?

This looks like the perfect product for my rig, but my main reason for WC is silent operation. How much noise from the pumps gets transferred through the frame of the res? I'm assuming I can mitigate vibrations transferred to the case by using rubber grommets or something, but not about noise coming through front of the res itself...

Quote:

---

Originally Posted by spacedog

Question for those who have this res, and are running with 2 pumps: How is the noise?

This looks like the perfect product for my rig, but my main reason for WC is silent operation. How much noise from the pumps gets transferred through the frame of the res? I'm assuming I can mitigate vibrations transferred to the case by using rubber grommets or something, but not about noise coming through front of the res itself...

---

I'm only running 1 pump virtually silent. Not sure why you'd need 2. 1 d5 pushes CPU>2 360 rads> full MB block and 2 gpu blocks no problem. :up:

Redundancy

Yeah, exactly, for the redundancy. But if you're using 1 pump to push that loop, then I assume you must be running it at or near full speed? If it's still nearly silent, then two running at a lower speed should be as good or better. Thanks!

Just ordered 4 with 4 pumps.. :D
will post pics as soon as they arrive :)
cheers and kind regards !!

Quote:

---

Originally Posted by Col. Panic

I just got this in and it is great. MUCH better than the frozen Q POS I'm replacing. BP 1/2"-3/4" compression fittings fit just fine.

---

I don't like to use 90s there too much reastriction

tbh dont think it would be all that restricive in a bay res.. go 45's imo..

Soon as the curved pipes are released ill be all over this like white on rice

FYI, You can also get a series setup by simply running from pump 1 to a component and back to P2.
http://img683.imageshack.us/img683/8...eriessetup.png

It may not be as clean as a curve pipe setup to minimize the tubing runs, but it would work just fine.

Doh... Why didn't I think of that
thanks Martin :up:

so only the PMP-400's are able to run this dual bay res or does anyone know a listing of what pumps can be used?