Intel Sandy Bridge Core i7 2600K / Biostar TP67XE

Printable View

Show 100 post(s) from this thread on one page

01-13-2011, 08:07 PM
namegt

Quote:

Originally Posted by Linuxfan

NameGT: Try Wprime 32M and 1024M at 5.5ghz! :up:

ok~ ;)

Quote:

Originally Posted by PatRaceTin

What DRAM Voltage for 1080 7 - 7 - 7 - 21 ?

1.75v :)
01-14-2011, 01:08 PM
Dumo

Nice runs GT:up:

I have the same board
Any new bios?
01-14-2011, 01:27 PM
Pt1t

Quote:

Originally Posted by Dumo

Nice runs GT:up:

I have the same board
Any new bios?

http://www.pt1t.eu/public/P67/TP67XE/uefi/

This one is almost ready ... ;)
01-14-2011, 02:29 PM
FlanK3r

namegt: u can not change multiplier at 56x with LN2? :( How is it with SB and coldbug?
01-14-2011, 04:58 PM
namegt

Quote:

Originally Posted by Dumo

Nice runs GT:up:

I have the same board
Any new bios?

Thank you. :)
Try the bios.
http://namegt.com/attachment/cfile9....CB3921D9BA.zip

Quote:

Originally Posted by Pt1t

http://www.pt1t.eu/public/P67/TP67XE/uefi/

This one is almost ready ... ;)

When can I see the bios? :)

Quote:

Originally Posted by FlanK3r

namegt: u can not change multiplier at 56x with LN2? :( How is it with SB and coldbug?

Think it's probably the limit of cpu. My cpu 55x

CB-95C
01-14-2011, 05:51 PM
Dumo

Thanks GT and pt1t:up:

I will report it back here:)
01-14-2011, 05:55 PM
ugotd8

Just exchanged my GA-P67A-UD4 for the TP67XE.

You guys been keepin' secrets. :-)

Seriously tho, I *really* like this board so far. I'm only going to 4.8Ghz 24/7 because my 2600K needs 1.404 load to be stable and I'm on air.

This board is probably the best value on the P67 market right now (in my opinion).
01-15-2011, 07:13 AM
joshua7

Quote:

Originally Posted by ugotd8

Just exchanged my GA-P67A-UD4 for the TP67XE.

You guys been keepin' secrets. :-)

Seriously tho, I *really* like this board so far. I'm only going to 4.8Ghz 24/7 because my 2600K needs 1.404 load to be stable and I'm on air.

This board is probably the best value on the P67 market right now (in my opinion).

Why did you change? The UD4 was not good enough?
01-15-2011, 11:02 AM
ugotd8

Quote:

Originally Posted by joshua7

Why did you change? The UD4 was not good enough?

Much more stable BIOS
Better BIOS
10-phase vs. 8-phase
Saved $60 US. I think the UD4 is overpriced for what you get TBH.
There is no blue on the TP67XE. :-)

I love the BIOS on the Biostar, have to admit one fault tho, no way to save settings, anywhere.
01-15-2011, 11:12 AM
Pt1t

Quote:

Originally Posted by ugotd8

Much more stable BIOS
Better BIOS
10-phase vs. 8-phase
Saved $60 US. I think the UD4 is overpriced for what you get TBH.
There is no blue on the TP67XE. :-)

I love the BIOS on the Biostar, have to admit one fault tho, no way to save settings, anywhere.

Profiles are coming:)
01-15-2011, 04:03 PM
ugotd8

Quote:

Originally Posted by Pt1t

Profiles are coming:)

Awesome ! Thanks for the update.
01-15-2011, 04:28 PM
ugotd8

Hi, one other BIOS nitpick here:

In the BIOS manual on the CD (ENUTP67XE.pdf) on page 27 it says this:

CPU VCore LoadLine
This item sets VCore LoadLine.
Options: Enabled (Default) / Disabled / 87.5% LoadLine / 75.0% LoadLine /
62.5% LoadLine / 50.0% LoadLine / 37.5% LoadLine / 25.0% LoadLine
/ 12.5% LoadLine

I'm currently on P67AF103.BST (dated 01/03/11) and when I select CPU VCore LoadLine I only see disable or enable, none of the options mentioned above.

Is this an issue, or am I doing something wrong ?
01-16-2011, 04:37 AM
aslanwas

Quote:

Originally Posted by namegt

Yes. My ln2 session
...
LN2 / air cooling, there is not much difference.:shakes:
...
6sec 672ms with Intel Core i7 2600K at 5567.8MHz

just a diffrence of 216K of temperature :D:D:D:D
Very good effiency with these sandy bridges on SuperPi 1m :up::up:, 6ghz eould mean sub 6 sec's:eek:
01-16-2011, 08:18 AM
joshua7

Quote:

Originally Posted by ugotd8

Much more stable BIOS
Better BIOS
10-phase vs. 8-phase
Saved $60 US. I think the UD4 is overpriced for what you get TBH.
There is no blue on the TP67XE. :-)

I love the BIOS on the Biostar, have to admit one fault tho, no way to save settings, anywhere.

I see. I guees the only thing that would matter to me here is the 8 vs. 10 phase design. What did you manage in the UD4? I am curious whether you can achieve better clocks in the Biostar at all.
01-16-2011, 09:46 AM
mikecdm

I have a few gripes with the biostar and have had some pretty bad luck with it. I see that the profiles are being taken care of. It would be nice to have the option to lower bclk.

Other than that, I've had bad luck clocking chips with this board. I originally bought the P8P67 and a 2500k and got about 5.3ghz on it and then sold the combo. I originally wanted the biostar but it was not available. Then I picked up another 2500k and the biostar. I could barely break 5ghz with it. Then I sold the chip and bought a 2600k. Once again I could barely break 5ghz. Now either I have some bad luck with chips, or this biostar isn't working out very well. So yesterday I picked up the msi gd-65 and managed 5.3ghz out of the same chip.
01-16-2011, 04:18 PM
namegt

Super Pi 32M try harder
My cpu is the limit.

http://cfile29.uf.tistory.com/origin...4D338A0F178A83
01-17-2011, 04:26 AM
MaJ0r

namegt you got strong memory. Very good timings!
01-20-2011, 01:41 PM
Dumo

Thanks for the bios GT:up:

So far with SS and D9GTR

http://img543.imageshack.us/img543/3...enshot013y.jpg
01-20-2011, 07:52 PM
namegt

Quote:

Originally Posted by MaJ0r

namegt you got strong memory. Very good timings!

Thank you.:)

Quote:

Originally Posted by Dumo

Thanks for the bios GT:up:

So far with SS and D9GTR

http://img543.imageshack.us/img543/3...enshot013y.jpg

Well done. :)
01-20-2011, 07:56 PM
namegt

http://cfile27.uf.tistory.com/origin...4D3625ED392D8A
6min 4sec 156ms with Intel Core i7 2600K at 5478.5MHz

and...
2500k + TP67XE was ready to test.
01-20-2011, 08:00 PM
Linuxfan

Superpi32M you're rockin'!
But where is Wprime!?! :D
01-20-2011, 08:02 PM
namegt

Intel Sandy Bridge i5 2500K
Air 5GHz Overclock Video Guide

http://www.youtube.com/watch?v=dpoJ2...layer_embedded

http://cfile9.uf.tistory.com/origina...4D36BED502B9E3

http://cfile1.uf.tistory.com/origina...4D37ABFD2CBDE0
5404.4 mhz with Intel Core i5 2500K at 5404.4MHz
http://valid.canardpc.com/show_oc.php?id=1605302

http://cfile9.uf.tistory.com/origina...4D37ABFB29F590
6sec 906ms with Intel Core i5 2500K at 5404MHz

http://cfile23.uf.tistory.com/origin...4D37ABFD2BB51D
6min 9sec 891ms with Intel Core i5 2500K at 5404MHz
01-20-2011, 08:18 PM
Dumo

Nice runs there GT:up:...Almost sub 6 sec.

Can you passed >54 multi with this bios?
01-22-2011, 01:11 PM
trans am

eyegoo! Name gt should I get the tp67xe or can I get similar clocks off the th67xe? I like the th67xe since the x16/x4 i have a raid card and I dont want to cap my vga at x8/x8. Im watching the vid now. th55xe was one of my fav boards last year.

tp67 runs at 8x/8x when you have both x16 slots populated.
th version runs at full 16/4x but lacks in power phase.
hey DUMO! nice to see you in here buddy. lets bench soon.
01-22-2011, 08:58 PM
PcCI2iminal

Quote:

Originally Posted by trans am

eyegoo! Name gt should I get the tp67xe or can I get similar clocks off the th67xe? I like the th67xe since the x16/x4 i have a raid card and I dont want to cap my vga at x8/x8. Im watching the vid now. th55xe was one of my fav boards last year.

tp67 runs at 8x/8x when you have both x16 slots populated.
th version runs at full 16/4x but lacks in power phase.
hey DUMO! nice to see you in here buddy. lets bench soon.

as far as i know H67 cant OC well,you just can OC the reference clock ,the multiplier is locked at default speed,memory divider sux ...max is 1333MHz..

time to handpick ;)

http://ftpbackup.mojostech.net/revie...retailss/1.JPG
http://ftpbackup.mojostech.net/revie...retailss/2.JPG
http://ftpbackup.mojostech.net/revie...retailss/3.JPG

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 05:31 AM.

XtremeSystems