Lilianna by Screamer - LC build

Printable View

Show 100 post(s) from this thread on one page

06-06-2010, 05:47 PM
marxviper

thanks for sharing it on this site

I learned a lot from your pictures
06-06-2010, 10:31 PM
Oli4v

F*ckin' Epic case !

Edit: and I also appreciate that you've also got the original V2000 case too :)
06-06-2010, 10:51 PM
metachronos

submit this to mdpc duuuude.
06-06-2010, 10:55 PM
imersa

mdpc easily. one of the best builds I've seen.
06-06-2010, 11:14 PM
blazarcher

Damn man, that's way too much swapping hardware. BTW, how are your temps xD

Love the fact that you picked a Lian Li case, seriously everyone that do builds with Lian Li cases always seem to come out perfect. Maybe your next build should be using the Lian Li V2120? -- Just giving some ideas =)

This definitely deserves to be up on MDPC with a few modifications of course.
06-07-2010, 05:25 AM
Saltire

Quote:

Originally Posted by churchy

Oooh, :banana::banana::banana::banana:. :)

My thoughts exactly ! :eek:
06-07-2010, 05:43 AM
TomH999

Wow.
06-07-2010, 06:34 AM
sqw33d

so pro!...love it...all of it! wheeew!....
06-07-2010, 09:44 AM
Screamer

Quote:

Originally Posted by davidm71

So Screamer,

You like the Magmas on your radiator? Working well? I also am using the magmas but not so sure about them. Static pressure is a bit weak...

Dave.

I'm satisfied with my Magma's. I use thin radiators from Swiftech so I don't need a storm :) My Magma's are working on 400-500rpm
06-07-2010, 03:21 PM
hausner

Finally you made a worklog on XS, im watching your worklog on purepc for long time hehe, top quality!
06-07-2010, 05:48 PM
Vinas

I like rev 3 the best because I don't like to put design over performance. :up: You do have a really nice build by the way! :yepp: Keep up the good work.
06-07-2010, 07:43 PM
Pellepel

Now to actually use the computer :p: nice build and love the curves (tubing).
06-08-2010, 08:48 AM
kone

Come on, I don't think it is over, keep in your good job.

btw: thanks for your help ^^
06-08-2010, 11:41 AM
Red-5

This is an epic build mate. I must agree, this does deserve to be featured on MDPC.
In a word, AWESOME. :)
06-08-2010, 01:35 PM
lzxhenry

Quote:

Originally Posted by Screamer

Finally, yesterday I had some time to make good pictures. Good light and several hours of time with camera in hand and the effect can be seen below. More photos as always in my gallery :)

Awesome Work!!!
06-08-2010, 05:14 PM
blazarcher

Simply AMAZING. You NEED to show me how you made that aluminum piece to hide the 5.25" bay, I was thinking of something similar for my build, although it won't be bent and cover the entire bay.
06-08-2010, 10:17 PM
Screamer

Thanks All. It gives me the desire to next ideas :)

Quote:

Originally Posted by blazarcher

BTW, how are your temps xD

Temps are OK. I will put screen here at evening.

Quote:

Originally Posted by hausner

Finally you made a worklog on XS, im watching your worklog on purepc for long time hehe, top quality!

My main worklog is on pclab. On purepc is only a gallery :)

Quote:

Originally Posted by blazarcher

Simply AMAZING. You NEED to show me how you made that aluminum piece to hide the 5.25" bay, I was thinking of something similar for my build, although it won't be bent and cover the entire bay.

No problem, but at evening :)
06-09-2010, 01:25 AM
LogAn'sRun

What do you have behind the drive bay? I like the covers, but I'm not getting why you have all the tubing holes through that panel with no tubing (sorry if I'm slow)? I see now that you have light behind there , but was there another purpose? Also, any pics with the cover off so we can see what you're up to?

BTW - easily one of the best v2010's I've seen.
06-09-2010, 04:00 AM
Church

Quote:

Originally Posted by Screamer

..My main worklog is on pclab. On purepc is only a gallery :)..

Simply put urls to both by editing first post :). Of course gallery link is in your sig, but sig can change by time, imho better of all needed info is in post.
06-09-2010, 11:54 AM
Screamer

Quote:

Originally Posted by blazarcher

BTW, how are your temps xD

Screen from April.

CPU 4GHz, all cores charged by hour. 8 blocks in the system - CPU, RAM, QPI, 2xGPU, 2xMosfets and NB/SB. Two radiators: Swiftech MCR220 and MCR420. Fans: ~500-600RPM, pump 65%, flow ~100L/h.

CPU temps: idle ~31*C, load max 66*C
Fluid temps (load): ahead radiators 28,5*C (Fluid in), after radiators 27,7*C (Fluid out)

Ambient temperature: 22,4*C (fifth sensor, described as a bottom)

http://i.imagehost.org/t/0247/4_0GHz...ime95_Swif.jpg

Today temps are higher, in load around 75*C but we have summer :)
Anyway, temps are not very important for me. The most important is beautiful system :)

Quote:

Originally Posted by blazarcher

Simply AMAZING. You NEED to show me how you made that aluminum piece to hide the 5.25" bay, I was thinking of something similar for my build, although it won't be bent and cover the entire bay.

Simple project :)

http://i.imagehost.org/0072/projekt1.jpg

Piece of aluminum sheet:

http://i.imagehost.org/0979/P1070832.jpg

and ready cover. It was made by my friend, Barus.

http://d.imagehost.org/0376/DSC09915.jpg

http://d.imagehost.org/0184/DSC09917.jpg

http://d.imagehost.org/0732/DSC09921.jpg

http://e.imagehost.org/0798/DSC09943.jpg

http://i.imagehost.org/0604/DSC09946.jpg

Quote:

Originally Posted by LogAn'sRun

What do you have behind the drive bay? I like the covers, but I'm not getting why you have all the tubing holes through that panel with no tubing (sorry if I'm slow)? I see now that you have light behind there , but was there another purpose? Also, any pics with the cover off so we can see what you're up to?

Behind te drive bay I have one of my radiator (Swiftech MCR220 with Magmas).

http://i.imagehost.org/0723/DSC09689.jpg

Cover was made for a some idea - all of tubes coming out from one place. Idea was good but nothing came of it. Here are the photos from the trials.

http://a.imagehost.org/0304/DSC00013.jpg

http://j.imagehost.org/0076/DSC00019.jpg

http://j.imagehost.org/0372/DSC00020.jpg

http://h.imagehost.org/0776/DSC00021.jpg

Now the cover is for the light, keeping the reservoir and I for the first connect to LC system (cover -> RAM). I hope you understand my English :D

Quote:

Originally Posted by churchy

Simply put urls to both by editing first post :). Of course gallery link is in your sig, but sig can change by time, imho better of all needed info is in post.

Link added.
06-09-2010, 03:53 PM
Liderc

Holy :banana::banana::banana::banana:
06-09-2010, 04:54 PM
ohms

That shroud/cover is an insanely good idea! Don't have to worry about any mess of tubing showing. :up:
06-09-2010, 05:11 PM
Jor3lBR

If you liked this build just as I did go to http://www.million-dollar-pc.com/nex...ful-system.htm and report this system (just ad the link to this thread on the left tab)... Beautiful work Screamer!
06-10-2010, 09:55 AM
ScottALot

Wait, are you going to be using a colored liquid?
06-12-2010, 10:48 AM
shazza

14 posts pertaining to this build have been moved from the Liquid Cooling Case Gallery Thread to this worklog.

Nice build, Screamer.

Show 100 post(s) from this thread on one page