Printable View
I'm still running my Q6600 at 3.6 1.44V, depending on ambients OCCT hits 40-45C...Linpack is pretty extreme.Quote:
Originally Posted by Lafas1987
But...if you complete that succesfully, don't worry about it...call it success. I personally think OCCT is more than stressful enough for my uses. About the hardest thing I do is render HD video for 20 minutes and it's at most taxing 80% or so. Linpack is nuts stressfull..:D
Hmmm...Quote:
Originally Posted by Martinm210
Are your Full Load Temps about 40-45C?
Very Low Temps!
Awesome!
Yeah, i know that i will never Load my CPU as Linpack does, but if we want to talk about Full Load, have we got to talk with Linpack or not?Quote:
Originally Posted by Martinm210
Yeah, I got pretty lucky with this chip (Quad rad doesn't hurt either), ran quite a bit cooler than my E6600 did.Quote:
Originally Posted by Lafas1987
Here is my old test I ran a while back using Prime 95:
http://martin.skinneelabs.com/img/CP...kShootout1.png
http://www.xtremesystems.org/forums/...d.php?t=206712
Of coarse now that it's winter with a wood stove, I see ambients fluctuate anywhere from 60F-80F depending on how much I let my wife roast me out..
Right now there is about 4" of snow on the ground and I'm roasting in my shorts and tanktop in the house..:D
Supposed to get down to -3F over the next couple of days, so I can expect the house to be 90F:ROTF:
Yes, i see.
I think that you have the one and only Q6600 who is so Cold!
I would like to know temperatures from other set ups with Q6600 with a normal Watercooled Loop.
Ek Supreme looks very good waterblock!
I had a q6600 with a 4870 on a swiftech triple, I don't recall seeing it break 75c, even in summer. Had it @ 3.8, 1.46v. Idle low 40s, load high 60s.
^^
Linpack load?
I run a q6600 @ 3.6ghz on a single 120.2 thermochill with a gtx 260 in the loop, idles at 44C, and loads at 65-68C. When the loop gets hot enough my 2nd 120.2 thermochill fans kick on, and temps at load drop to around 55-60C depending on the ambient. System is whisper quiet though with 2 fans on.
If it helps i have a q6600 on a TRUE @3.4GHz 1.4V and i reach 70C load with an ambient of around 26C or so.
I have
63C
63C
55C
55C
(OCCT)
with ambient around 19-20C....
If i change my cpu block i think i can decrease arround 3-4C.
My current block is
http://i189.photobucket.com/albums/z...987/eleven.jpg
Hello again!Quote:
Originally Posted by Lafas1987
I want opinion about the following cpu clocks.
http://www.frozencpu.com/products/97...66.html?tl=g30
vs
http://www.frozencpu.com/products/85...2_AM2_AM3.html
Thanks.:)
With better block mounting, i have decrease temperature.
Now i have -5C @ Idle and -7C @ Full Load!
that still seems hot for linpack... mines at 1.58 in bios and shows 1.51 under load and it idles around 42 and peaks at 78 or so in linpack... then again its been a while...
So, with a better block i will decrease temps huh?
Next month i will buy swiftech xt!
Lafas, try highflow.nl and aquatuning.de for the block,or even direct from EK Webshop.... postage cost for greece is lower....or you can find one at plaisio stockhouse...
Most of your problems come from the old block.
You'll be happy with the Swiftech XT
i will test my VCore sucking Q6600 to compare with you