Printable View
TT Sense works with a NTC thermistor - it should not affect the cold temp throttling at all really because NTC thermistors will hold their resistance high well into the sub-temp threshold (that's why they're NTC :) ). This prevents excessive sinking of the 122ua to ground, thus keeping the voltage at the comparator above the throttle threshold. I doubt lifting that pin will do anything in this case, although I guess you're free to try.
We ( well, at least I ) don't know the location of the thermistor, could be near a hot source, won't make a difference more than likely, but I do remember saying such things in the past and the results proving otherwise ;)
Try it then I guess. Most NTC thermistors will hold their resistance beyond -75 Celsius without a problem.
how can i use gigabyte soc tuner for my vga ?
the vga is gigabyte GV-R5870D5-1GD-B
You can't.Quote:
Originally Posted by siavash_shojaee
This tools is made for the Super Overclock edition which carries different PWM controllers.
No matter what you do, it won't work.
how can i give voltage to memory?Quote:
Originally Posted by BenchZowner
Only with a hard mod, and if it uses the standard Samsung memory chips you will gain nothing with higher voltage.
So there is absolutely no way to change the voltage through software.. :( Ab or anything at all? I already hard modded my mobo.. If the mod actually helps then I guess it's worth it otherwise a no go for me.. :(
Others seem to be able to change the GPU core voltage with the software I linked.
My card didn't ( funny, I'm the only one :D ).
Afterburner ? for sure no.
Try the tool I linked.
There is using OC Guru. Vgpu up to 1.30v and Vmem up 10 1.70v. :up:Quote:
Originally Posted by Bodar
He was asking about a non-SOC card ;)Quote:
Originally Posted by Jor3lBR
Quote:
Originally Posted by siavash_shojaee
Is there a way to change the oc guru software to get 1.5v or 1.6? I've managed 1.5v on a regular 5870 through software before.. thanks so much! Sorry I forgot to mention it's a retail SOC
Yes, do the VID mod posted for 1.5V....then OC Guru will default to 1.5V and allow SW adjustment up to 1.6V :toast:
Mia,Quote:
Originally Posted by miahallen
If the VID mod overvolts by 0.5v all I need to do is perform the 1.40vid mod and this will be raised up to 1.55v thru OC Guru?
No....OC Guru only allows an additional +0.1V added to the set VID ;) Set your VID on 1.4V and you'll default to 1.4V, OC Guru will allow you to raise that up to 1.5V :toast:
I read somewhere here that either you or benchzowner where having 0.5v of overvolt? So if the vid was set to 1.55v you were at real 1.6v?Quote:
Originally Posted by miahallen
Yes, that's correct.
Mine and miahallen's (?) card overvolt by 0.05V, so if you do a VID mod for 1.35V you'll get 1.4V, etc.
I make fb mod with 20kOhm and vgpu def is 1.25v, with soft You can push it to 1.35v. But my problem is ... at stock cooling and stock MHz I get freez in any 3D bench, when I push some more voltage then I can close to 1GHz on gpu :rofl: with air, on ln2 with 1.4v I cannot complete any 3D bench with temp -100C or sub @ 1150MHz on gpu.
I think MSI card is mouch better than GB SOC.
I only got an extra 0.05V when I did the 1.55V VID mod (so I got 1.6V actual).Quote:
Originally Posted by BenchZowner
When I did the 1.4V VID mod, I got 1.4V actual :)
From what I understand, the FB mod will not adjust OVP...the VID mod will :up:Quote:
Originally Posted by DEVIL K-ce
Exactly what miah said DEVIL.
I'm quite sure that you're getting OVP'd.
Ok, but also without mod and on any cooling solution I have freez in 3d test. With voltage adjust only from software card cannot complete bench at 1GHz.
Sorry to hear about your sample man, mine passes PCMark05 Graphics Suit with 1050Mhz/1350Mhz on stock volts.Quote:
Originally Posted by DEVIL K-ce
If it crashes at default clocks and the temperatures are normal, then I guess an RMA is in order.Quote:
Originally Posted by DEVIL K-ce
Tested another sample last weekend with Marc Beier: 1300/1375 Vantage stable.
No coldbug, but sadly enough the card wasn't scaling with voltage at all. Just a bad sample, I guess :(
What vtt?