Intel X980 OC Report

Great info Fugger ... thanks for sharing :up:

*goes back to watch muppets purchasing flaky A0 chips on Ebay for $1200*

Quote:

---

Originally Posted by hicookie

8K is ocp ot 300a, with my 5.97GHz vantage full load not more than 250a
so i think mod is enough for you drive gulftown.

---

hey hicookie, is a mod needed to get Xeon EP CPUs working in the UD7?

Quote:

---

Originally Posted by miahallen

hey hicookie, is a mod needed to get Xeon EP CPUs working in the UD7?

---

The hard mod is NOT needed for UD7. That's only for higher frequencies.

I can confirm that DP Xoen X5650 boots and runs just fine on UD7 with the latest official BIOS F6.

Thanks, my X5667 also worked just fine, and the mod also worked great for some wPrime runs @ 5.6GHz+ :toast:

I tested B0 and B1 on biostar board, IMC of B0 and B1 are almost the same.

Tpower X58A doesnt have OCP protection ... but need coldbug mod :D

http://www.pt1t.eu/public/X58/Q3VG/T...x_2448_CL8.png

http://www.pt1t.eu/public/X58/Q3VG/9...4500_1_39V.png

This very good details and nice thread

Thank you for sharing Fugger

Thx Fugger!

Fugger, your GTX 260 uses DX11?

GPU Type : NVIDIA GeForce GTX 260
GPU Clocks : Core 680 MHz / RAM 1250 MHz
DirectX Version : 11.0

Quote:

---

Originally Posted by Pt1t

... but need coldbug mod :D

---

mine will not start at zero degrees ... :(

Hicookie retest with B1 chip and high clocks, seems the k value needs to be changed or another mod is needed.

A0 has stuff disabled in chip unlike the B1 we are using.

Very useful report FUGGER. Thank you :D

keep pushing it

How 'bout OCP issues on the Eclipse SLI? I at least noticed some quite interesting fluctuations when I set VCore to 1.8V with my B1, but I'm not sure if that's just me. Only tested my chip once so far.

hi guys, got an Q3FE here, running this CPU on 4,4 Ghz i need 1,38-1,4V , 1,44 V to get it primestable... Will this CPU die with 1,376 Vcore and 1,29 VTT quickly? On 25°C water so far.

Quote:

---

Originally Posted by Sam_oslo

The hard mod is NOT needed for UD7. That's only for higher frequencies.

I can confirm that DP Xoen X5650 boots and runs just fine on UD7 with the latest official BIOS F6.

---

Define higher frequencies ?

Quote:

---

Originally Posted by Blueking

Define higher frequencies ?

---

5.5+CPU tests

Quote:

---

Originally Posted by FUGGER

Hicookie retest with B1 chip and high clocks, seems the k value needs to be changed or another mod is needed.

A0 has stuff disabled in chip unlike the B1 we are using.

---

Any updates on this Charles? Hicookie? :shrug:

Thanks :toast:

I wait to try the UD9, I pulled the mod.

The board runs fine with X5680, tested to 40x multiple. Q4HH

I wait to try the UD9, I pulled the mod.

The board runs fine with X5680, tested to 40x multiple. Q4HH

You pulled the mod? So it wasn't helping? I have not tested w/o....but I've not been very impressed with my UD7 compared to E760....maybe I'll try pulling mine to????? Thanks for the reply bro :up:

Really learned a lot from you!