compact minitower for 100% internal WC, 240mm rad....

i'll use just the cpu on WC now. Full cover vga blocks are inexistent here in Brazil, and importing will cost more than the whole project.

The orientation will remain stock, as I've done 3 inverted cases recently, and I'm trough with it for now.

The exterior rad is to keep the ATX-frienldy layout. If a mainboard change is at hand, I could choose any. i love Matx, but flexibility is always welcome.
The rad will not remain outside for now, because my current vga is single-slot, and there is no other pci used. Internal rad looks cleaner.

Great build, I'll be definitely watching this :)

I just might need some new ideas for a case :D

http://www.chemfy.fi/series/Case_MkI...0380_pieni.JPG

Me likes deep-short cases...... ehehehehehheeh

a pity about the CM 340 be so hard to find here.
Today I'm shopping my case feet. Wish me luck

Joger, I'm curious what case that is. I wouldn't buy it (no exhaust fans), but its different (sorta, in a retro way, lol)

If you're looking for an upgrade, the TJ08 (silver or black) or Antec NSK3480. I prefer the Silverstone since seems to just be made better and nicer looking.


Sorry to hi-jack the thread.

Please post more. You're giving me ideas for even air cooling. :up:

Quote:

---

Originally Posted by miptzi

Me likes deep-short cases...... ehehehehehheeh

a pity about the CM 340 be so hard to find here.
Today I'm shopping my case feet. Wish me luck

---

Post pictures ! :D

Quote:

---

Originally Posted by [XC] Synthetickiller

Please post more. You're giving me ideas for even air cooling. :up:

---

The case was given to me free, I believe it is from the early 2000 or late 90's, it has no information on make/model. The indsides were Athlon XP -era :)

You can find the rest of the pictures here.

very nice. I own one gmc r2 too and I really like this case, but its hard to fit an 240mm in it, I really hope you can do it!
the hardest mod I did in it was adding two more harddrives.
valeu miptzi!

ae junin (qual teu username no adrena?)

guys, the feet were shipped. Not that model I wanted in the previous page (lame) but another one.
I hope to recieve it this week. AND the WC parts that are the last part to the project.

meu user lá é juninho

good luck with the wc parts!

here comes the feet :D
In fact, door handles, but will do OK.

Pure, solid aluminum

http://img98.imageshack.us/img98/999/sdc10170u.jpg

http://img202.imageshack.us/img202/7280/sdc10171o.jpg

and where did you find those, there nice

furniture shop.
PLain simple door handles, easy to find and cheap

the last WC parts

http://img651.imageshack.us/img651/8642/sdc10172.jpg

and here it is, after some changes in the original ideia...
feet will come later....


http://img189.imageshack.us/img189/8538/sdc10180g.jpg http://img29.imageshack.us/img29/5986/sdc10184z.jpg

http://img203.imageshack.us/img203/8899/sdc10181.jpg http://img69.imageshack.us/img69/5718/sdc10183n.jpg

http://img29.imageshack.us/img29/3154/sdc10185pr.jpg http://img710.imageshack.us/img710/3216/sdc10182t.jpg

http://img64.imageshack.us/img64/6725/sdc10187x.jpg http://img203.imageshack.us/img203/363/sdc10186y.jpg

http://img132.imageshack.us/img132/4467/sdc10188vf.jpg http://img208.imageshack.us/img208/8558/sdc10189.jpg

That's amaaaazing.

It looks like there's a flattening of the tubing on the outlet of the CPU block (?)

Just trying to save you from flow-death :P Very nice sir. Have you considered a rad for the small fans? are they 80 or 92mm? Pretty sure I've seen it on P-PCs if you order from them. Maybe you can at least use it to get a part number if you like it.

I'm always trying to get more rad....

yah, I know those rads, but they look like toys to me. ehehehehehehhe

The flat part is because of the shooting angle. It's nice and round....

If I manage to get some taller feet than the previous, then I''l put more fans at ethe external bottom of the case, and perhaps add a vga waterclock....

Ok. I always assume the worst in pictures. I did notice some of the other pics looked ok and there were no bulges, but I wanted to make sure :up:

I usually find a kink in my tubing after alerting someone else, so this may help me when I check my rig :D haha

I'm waiting my 80mm AKASA white led fans to finish, the 120mm are white, but only appear at night.
And the next set of handles I get, I'll put another pair in the top of the case, and make my "Lil Cosmos"

Quote:

---

Originally Posted by miptzi

http://img208.imageshack.us/img208/8558/sdc10189.jpg

---

Holy hell that is amazing! Great job! The two HDD's especially look good :up:

Ladz:

I had a TERRIFIC idea. Synthetic, it'll help you as well if you are still with your project.

Remember the fronte bezel? The lower part is hollow, to house the DVD drive. Something that I DONT use.
So, I'll take the pump OUT of the main compartment, but still inside the case, it that very hollow useless space!

Just use my others 90º fittings and the internal space will accomodate even SLI in full atx mobos....

The window, by the way..... simple but does the job

http://img690.imageshack.us/img690/40/sdc10194u.jpg

http://img690.imageshack.us/img690/8813/sdc10196e.jpg http://img715.imageshack.us/img715/6606/sdc10195.jpg

i like it, that really looks good. I cant wait to see the feet on there.

Very nice! I was surprised to see you use a res, but everything looks great!:up:

I could see doing an i7 mATX build like this and NOT having heat issues. This is really really tempting. I just don't have the need or cash right now.

I'll bookmark this thread for later use. I have to say, it couldn't be done any better.

What are your temps and OC?

BTW, I might do an air cooled version, I.E. no rad, but two 120mm fans at the bottom. Since this case can hold a Mugen 2, SLI + that much air intake may keep an i7 more than cool enough.

I'd love to see a gpu block added in to the loop.

Amazing man. I can't appreciate this thread enough. Makes me feel bad I have my R-3 sitting on my floor. I need more cash flow!

I forgot to ask. Is the fillport at the top of the case so you don't have to open it to refil the res?

Can you post a pic if that's the case?

in fact, as the res comes out easily of its holding clips, and it can be dragged outside, the fill hole was not made on the top of the case.
I tried to do the smallest damage to the top. If you see it from far, the cases is 100% stock. Thats what I meant in this project.

This week the feet will take their place, and I'll try to use the feet I got, remaking the screw holes a bit closer.
And taking the pump out, ( perhaps even the Res can be on the DVD void.)

AND if you go air, another hint;

Just on the DVD hollow bezel, you can put an 120-140mm intake fan, for greater air intake and vga coolness.
OR remove this fan, and use his hole to add even a 5970 ( the case have 34cm from back to the internal end of front bezel)
But the R-2 have gills on the DVD space, the R-3 does not. Shame.

I'd take out DVD on your case, and use that space ( if its in the upper part) to hide all the PSu cables and/or rout them to the lower parts, like vga and stuff.

Lots of ideas that keep coming, hope it helps. :D

aee mipão soh na gringa!! aehaehah