22 bara was factory set (out of box) , I set it to 25 bara like I always set.
Printable View
22 bara was factory set (out of box) , I set it to 25 bara like I always set.
What should i say. ......Really good work. Stay tuned
would this work in a water chiller setup as well?
i was thinking,
use a plate HX on the hot side like you have it as a condenser but use watercooling radiators to remove the heat from the water.
on the cold side use another plate HX as the evaporator to chill the water for the PC's waterloop.
it would likely be quite a small setup and could be added into an existing waterloop with the addition of another waterpump and insulation of the pc components.
your thoughts?
Interesting idea ;) Sb can try it ;) . Maybe one day anybody will order such crazy cooler from me ? :rolleyes:Quote:
Originally Posted by fitseries3
Lol. that's all mine ;)
I ordered mostly because somebody in another thread told, that this is a stupid idea.
The first test was with C430 - I just added some settings (and some good voltage). I did not look for the highest OC, just wanted to see how it reacts.
The EVAP temp dropped only 0,7c under load :up:
http://www.upload.ee/image/185124/vbn.JPG
Because I had to work with my bench rig yesterday and the Celeron was (is) still there, I changed the FSB to 450 and voltage to 1,5v and was working with my stuff with the Celeron overclocked to 4 Ghz :rofl:
During the 4-5 hours, the liquid temp rised from 2c to 8c. The load temp came town to -49,5 (from -50,5). I have too strong mixture in a cooling system - I'll try to add some pure water to improve it.
Hopeing to have cold weature soon - I will add a rad and kick it outside then :rolleyes:
I will post some real results later.
wow impressive results don niger :)
Hi
this is my first post in this forum and I like to start something not so complicated and this thread made me like to start something, I can find anything what piotres has but one the HX plate.
anybody can give me suggestion where and how much cost for HX plate ?
if I cant any plate HX locally I planned to use tube in tube can any body give me formula how to calculate length ?
thankyou
In our country Brazed Plate Heat Exchanger Very Expensive around $200 for small size, $400 for medium size & $600 for large size.Quote:
Originally Posted by Rembulan
http://www.nikotehnikutama.com/conte...ger-alva-laval
OMG 200USDQuote:
Originally Posted by clear cmos
Ok I think I will take tube in tube way may be if some one can give me detail how to made HX I will more than happy to ask my workshop to build it.
what about cut an condenser from an old AC and put in a box and let the cold water flow in it, can it work, again any formula to calculate ?
You can do it (tube in tube) but I do not think of possibility the calculate now! Because there are other influential factors such as the capacity of the compressor and the efficiency of liquid cooling....Quote:
Originally Posted by Rembulan
http://www.benchtec.co.uk/1/watercoo...h/DSC00882.jpg
http://www.xtremesystems.org/forums/...d.php?t=159762
and this my old experience and the result is good with the X-Changer Triple 360mm Radiator ..
http://i275.photobucket.com/albums/j...e/DSC01596.jpg
Delated
Very nice unit :up:
So is using water better the using air?
Thanks
Yes, it is better I think. I couldn't boot higher than 3,8Ghz with C430 before (refilled Mach II). With this one, 4,08 is not a problem - possibly even more but cheap AData 2GB memory sticks can not go higher.
~13K is waiting for somebody to catch up
http://www.upload.ee/image/198806/signature.jpg
*I'm just setting up the system - too bad I do not have enough time for that.
This is old project (almost a year ago) I'm sorry I do not have a lot of photos, but my next project will be using the HX plate and I will try to put a lot of details here. Of course, that this method for those who want to get more quiet compared to the traditional way "Condenser + fan"Quote:
Originally Posted by MeltedDuron
Thank you
Hmm, cann't say - so far so good. It did well with low load but failed after installing E8600. Trying to figure out what's wrong.
Nice work but i suggest testing it also with 5C water. You might find out that it wont hold the same load.
Since you used r507, with 16C water you get around 9-10bar condensation. With 5C water you get 6-7bar condensation, at such a low discharge pressure you might get too much restriction from the captube. ;)
Edit: i see now its an older thread and the owner already got the unit.
Well, from what You sent me :
"E8600 5,25Ghz @ 1,65v
Idle
Outlet max (coolant) +2,6C, your probe max -51,9C, new probe max -50,4C CPU max -48C
Orthos 5 min run
Outlet max +1,5C, your probe max -46,8C, new probe max -37,9C CPU max +7C"
DonNiger mount another Kprobe, near bottom of evap from what I know ..
Just saw this as @quintus linked it in another thread. Really nice stuff!
really interesting idea about how to make chiller more quiet (if the dissipation surface of the watercooling radiator is big enough)Quote:
Originally Posted by Fitseries3
p.s. sorry for necroposting.
Piotres, really awesome unit. It inspired me much :D