Printable View
Ferhan, hear me! :D I am just joking and you know what I mean. ;) Anyway, awesome sleeving mate, I think you using the good colors with your connectors LOL. :up: I want to ask one general question here. Why people do always sleeving the cables with small pieces of heatshrink? Would not it be amazing what your heatshrinks little longer on it?
Keep up the good work mate. :)
:D thank you for the kind words
I think this length of heatshrink is enough to hold the sleeve in place but anyway it is each others choice ;) For me the most important thing is to do all operations neatly and evenly - it is the way to win
I am going to powdercoat case internals, so I need your opinion on color options:
1) all painted matt black
2) area 1 (see below) painted gloss black (may be pearl black or something similar), other parts (bottom, back panel, motherboard tray, frame) painted matt black
3) area 1 painted glossy dark blue (almost black) or gloss black with some blue particles, other parts (bottom, back panel, motherboard tray, frame) painted matt black
4) any other color options
Any input is appreciated, thanks in advance ;)
Notes:
1) I am going to use Feser UV blue tubing, it is rather dark and little purplish
http://img23.imageshack.us/img23/7257/dsc0008zoo.jpg
2) Area 1 is drive bays, HDD cages, PSU cage and central crossbar.
http://img12.imageshack.us/img12/5382/0p80f02edit.jpg
While I wont give you a direct answer. I personally don't like powder coating with "sparkles". IE gloss black with blue particles. I don't know why, I just like straight solid colors better.
The difference between gloss black and matte black will only really come out in pictures and/or close inspection. I personally don't like lots of gloss, just means more fingerprints.
I agree with you about sparkled coating, I just wanted to check all varieties :)
thanks for your opinion ;)
If you going to powdercoat your case internals, you should be careful with your color decision. I believe you'll make right decision about color schema out there. :up:Quote:
Originally Posted by aka_GK
Waiting for some updates here.
I've decided to go with matt black for the whole case :)Quote:
Originally Posted by Arthur
I was trying to disassemble my case and got this
http://img193.imageshack.us/img193/3584/dsc0085ey.jpg
WTF? Did they forgot to drill a hole here? Same with other 4 holes. Now I am unable to get out those panels in drive bays because I can not push the screwdriver through :shrug:
I checked Sniipe's worklog and he had holes there
Hi GK, maybe you can find at any store near you an angular add-on module for your screwdriver like this one (don't know if it fits in the space you have)or any similar tool... if not, i guess you'll have to drill some holes...
You can also fit the screwdriver tip only...tight fit it and try to unscrew with the use of pliers...
felix, thank you for suggestion.
I think angular module wouldn't fit, it seems like to drill some holes is the easiest way
I've decided to show the layout of future system while preparing case for powdercoating. As I am planning parts will be connected in the following order:
PA140.3 -> CPU block -> Motherboard -> EK Res -> GPU block -> pump MCP350 -> PA140.3
Any thoughts on this are highly appreciated :)
http://img200.imageshack.us/img200/9269/dsc0105cut.jpg
http://img30.imageshack.us/img30/3933/dsc0110n.jpg
This Thermochill is really huge thing :cool: I've tryed to put it into the case through the front - there are small holders at the top of the drive bay that doesn't allow to fit the rad. I was able to fit the rad only through the top, but even then I have to widen case a little by my hands
http://img3.imageshack.us/img3/8928/dsc0098rc.jpg
The only thing I haven't decided yet is where the hell I should place all of my HDDs?? :eek: Currently I have 2 in raid0 and 1 for storage and plan to buy one more for raid and one more for the storage :shakes:
may be it is finally time for SSDs? :D
Looking good! :)Quote:
Originally Posted by aka_GK
I'm doing a P80 for water cooling myself atm. Same as you, powder coated black inside :)
I only have one loop for now, and I'm placing my rad in the bottom blowing the air out. Only problem was making the holes.
I used a hole saw and it ended up quite nice, same as Eponymous did in his worklog.
It's now at the powder coating shop, hope it turns out ok.
Remember to make a sketch or something so the powder coaters know where to put seals for threads.
Putting the rad in the front is also a good place but you loose a lot of space for drives etc.Quote:
Originally Posted by aka_GK
A solution is to cut a HDD cage in half and put it on a plate in the top like Sniipe did.
Keep up the nice work! :clap:
Great work so far! I agree with the poster above, you have plenty of room up top for HDD. (You are putting 2nd rad in bottom correct?)
ok, thanks. Threads was the thing that disturbed me, now i know how to save threads in place ;)Quote:
Originally Posted by WinstonSthlm
btw, should case be sandblasted before coating?
yep, I have only one free slot :DQuote:
Originally Posted by WinstonSthlm
May be I'll pick any other more compact cage (e.g. Scythe HDD Stabilizer). Another option is to change my raid array to SSD, but it is "wallet run" :D
thank you ;)Quote:
Originally Posted by XKaan
Nope, I am going with only one rad in the front but who knows :)
now, that's a huge biaatch of a radiator :p:
Yea, they should put silicon pins in the threads. Since all threads aren't used it's good to make a sketch or something what threads you want to mask. I think I had 55 threads to be masked :)Quote:
Originally Posted by aka_GK
If it's just the aluminum parts of the case you don't need to blaster it. Do not know if they need to blaster the anodized since I'm not going to paint those. Think the black color is fine.
They will also machine wash the case before painting.
Hehe yea I know, SSD is expensive. I have one Intel G2 80GB for OS and a 1TB storage drive.Quote:
Originally Posted by aka_GK
Guys, I am going to Africa for vacation (actually it is Egypt) :surf:
I will come back 09/20
So my plan for further future (after vacation) is:
1. Powdercoat case internals
2. Get some more sleeving (already made an order, it is up to postal services now)
3. Finish PSU sleeving (mostly molex connectors and GPU powers)
4. ATM I am talking to Duniek for one very special item ;)
Stay tuned :)
Heh, I had the same problem man :(Quote:
Originally Posted by aka_GK
The thing I did to get the screws out was to use a small pointed tool to loosen the screws by putting it in sideways and some needle nose pliers to loosen the screws from the threaded part. Eventually you should be able to work them loose and remove them.
Buy a cheap screwdriver, cut it with a dremel and a pliers to unscrew.
http://img30.imageshack.us/img30/1776/53268934.jpg
yeah I had to make my own holes for that.... I forget how I did it but seriously it was a b|tch and a half to get those plates out....
or
http://www.harborfreight.com/cpi/pho...2699/92630.gif
(sorry i know i am a lurker, but i am active on several other forums and that is the exact tool you need. they are usually under $10, "right angle screwdriver" hope that helps.)
thank you guys, much appreciated your willing to help me, but if you stare a little at my last front-view picture you can see that I've already drilled holes and removed those freaking plates :)
I spent 20 minutes to remove first screw (bottom left on the picture - there is no hole) with thin knife blade, pliers and small screwdriver. After that I was nearly mad and took the drill :D
I have some new stuff arrived so I promise to please you with some new pictures tomorrow :cool:
Mine is from June 2009, comes with the holes to remove the plates:
http://img38.imageshack.us/img38/971...0091252.th.jpg
Really nice job so far! Excelent job on the sleeving!
thanks mate ;)Quote:
Originally Posted by Pulpoh
I have an old revision, in addition to this holes I have another cuts in motherboard tray.
I want to get some antivibration stuff for radiator (stock grey foam sucks :down:) and I like this one. But I suddenly figured out that fan spacing on my rad is 20mm. At chilledpc (where I got the rad) it is stated as 15mm spacing. :shrug:
So monsta silicon pad will not work?
Now promised PICS :D
sleeved Yate
http://img27.imageshack.us/img27/3045/img0883js.jpg
Another portion of excellent stuff from Nils
http://img21.imageshack.us/img21/427/img0853lh.jpg
I am in rush after vacation (university, job) and unfortunately don't have a lot of time :( I hope to get the Dremel and finish preparations for the powder coating by the end of this week.
Finally have some real progress :)
I got the Dremel couple of days ago so here is my first drilling job, it is hole in MB tray for 24-pin ATX
First of all made all measurements and marks, prepared safety shield :D I work in ExxonMobil so I'm familiar with "Safety first", "Nobody gets hurt" etc. Also there is my ghetto workbench :rofl: Unfortunately I don't have a good place for this.
http://img176.imageshack.us/img176/908/img0985.jpg
IMO turned out nice! sorry for fingerprints
http://img176.imageshack.us/img176/3969/img1001b.jpg
I rounded and polished edges so no need for rubber frames :cool:
http://img15.imageshack.us/img15/9172/img1012es.jpg
And finally GPU preview (lighting sucks but I wanted to share this with you)
http://img70.imageshack.us/img70/9899/img1000.jpg
Nice dremel work!