Printable View
thanks chri$ch for your answer.
got retail 860 (L926B436).
expected little bit better than i920.
with ht=on over 4,2 is hard
with ht=off over 4,3 is hard
ram is ok till 2300 cl9 with 1,40v imc.
i think i got a bad chip and the story with good and bad goes on like with i7920.
this would all be ok if the 860 would be cheaper then 920.
New Bios :P
Quote:
P7P55D 0606 Bios
Support Low Voltage DRAM Module
Quote:
P7P55D Pro 0606 Bios
Support Low Voltage DRAM Module
Quote:
P7P55D Deluxe 0606 Bios
Support Low Voltage DRAM Module
Cooler Master Hyper 212 plus does support on LGA 1156 $30 USD
About P7P55D Pro, it does support SLI however doesn't come with SLI bridge cable...there is no SLI bridge cable you can buy in the market except some used in ebay.
and P7P55D crossfire mode is x16x4 instead of x8x8
Seems like no one will review the P7P55D LE :<
It has been a while since it was released & @TYCUN i am sure the P7P55D crossfire mode is 8x8x and P7P55D LE crossfire mode is 16x4x.
I have a P7P55D, and it is 16x4x......Quote:
Originally Posted by ajaidev
You're right !Quote:
Originally Posted by Tycun
I just dowloaded the manual on Asus Website (new version, more beefy but was expected ...) and the specifications tells 16X/4X on Xmode.
IMO, it really sucks ...
Why use CF on P55 mobo? there's X58 for 16/16xQuote:
Originally Posted by ajaidev
I am totally agree with you, for the same price there is a Asock x58 extreme(best rating in newegg), that is why I got a economic version.Quote:
Originally Posted by 0lta
Intel Core I7 860 @ 4Ghz (200 x 20) Rams @ 2000Mhz CL8
Everest 5.02.1834 Beta Cpu Queen
http://img3.imageshack.us/img3/435/cpuqueen2.jpg
Everest 5.02.1834 Beta PhotoWorxx
http://img17.imageshack.us/img17/9702/photoworxx2.jpg
Everest 5.02.1834 Beta Zlib
http://img9.imageshack.us/img9/113/zlib2.jpg
Everest 5.02.1834 Beta Aes
http://img40.imageshack.us/img40/6592/aes2.jpg
Leitura
http://img10.imageshack.us/img10/2174/leitura.jpg
Escrita
http://img10.imageshack.us/img10/709/escrita.jpg
Copia
http://img10.imageshack.us/img10/4528/copiauy.jpg
Latencia
http://img29.imageshack.us/img29/8576/latenciah.jpg
I5 750 4.13GHz DDR3 2050Mhz
Vcore is a bit high, I think mine is about mid range
http://img7.imageshack.us/img7/9652/3hrprimestable.png
how much u have imc voltage for that 206x20 setup?
1.2VQuote:
Originally Posted by 0lta
I'm thinking about getting the P7P55D "vanilla", can you recommend this board for overclocking? Or is MSI P55-GD65 the better choice?
I7-860 wasn't great but at least I5-750 is reasonable both at 1,600Mhx & 1,900Mhz:-
At least managed a sub 9m Pi 32m:)
I5-750 4.2Ghz 21x200Mhz Ram x10 1,900Mhz 8-8-8-22
new bios???
ftp://ftp.asus.com.tw/pub/asus/mb/LG...-ASUS-9980.zip
what is this??
quick test
P7P55D Pro
0606 bios
batch L924B242
http://img514.imageshack.us/img514/9315/18920700.jpg
Hi peeps im having real trouble trying to figure this out. im on stock cooler. When i power on. Fans move a little, leds flash then switch off every few seconds. When i push the onboard switch just at the right time sometimes system will boot. At first i thought it must be due to old bios...i managed to get in bios quickly flashed to latest bios 0606..I thought maybe its the memory so i tried some OCZ which are in the QVL...still same issue. I can boot but it takes forever.
I even got as far as installing Vista x64 everything working BUT when i shutdown windows & try and switch on again. Issue remains the same.. has anyone here had any similar experiences?? id really appreciate any input.
Once the system is running all is well it only happens when i first start the pc or after shutting down.
my specs
i7 860
4gb gskill F3-12800CL7D-4GBRH cas 777 24 1.6v-1.65v
p7p55d evo bios 0606
asus radeon 4850 512mb
ocz 850watts psu
250gb hitachi hd
leds are a post procedure (diagnostic), you can disable it from bios, onboard switch is for memok test, manual sais 30 sec it lastQuote:
Originally Posted by irfs
http://valid.canardpc.com/cache/banner/715682.png
Decent 32m Pi
Click Pic for Link and bios settings
http://www.images.clunk.org.uk/revie...cks/21x205.png
My OCZ 850GXS PSU was the culprit. I used my Tagan U33 880Watts everything booted 1st time. Currently running i7 860 @ 4.1Ghz 1.35V DDR3 1530 CAS 7 7 7 24 1T
Temps are quite hot I need a good cooler im thinkin of gettin Corsair H50 when the 1156 bracket comes out.
Any other suggestions?? anyone using the Artic freezer Rev2 ? any good?
that's a bummer re PSU.
860 runs pretty warmish, i've been using aNoctua NH-U12P see link for more info Air cooling section. A bit dear but worth it espedcially as it comes with 2x fans which ratail themselves for around £30
I just installed my P7P55D, together with my new i5 750, and what can I say?? I am amazed!! Set Bclk to 200 in BIOS, changed multi to 20, RAM to 1600, saved and it booted right into windows, everything else is on "Auto"!!
I'm using the PC for over 2 hours now (Internet etc.), no problems so far, will run some Prime tomorrow to check stability!
nothing screenshot worthy yet, just a low voltage run to check out the turbo with C-STATE enabled and set to C6.
Prime95 Stable
Super PI 1.5XS 1M: 12.339s C-STATE disabled, 21x max multi.
Super PI 1.5XS 1M: 10.920s enabled at C6, 24x max multi.
Idle temps dropped from 38C to 32C with C-STATE enabled.
BIOS 0209
Batch L924B521
Code:ASUS P7P55D Pro
Ai Tweaker
Ai Overclock Tuner...........:[Manual]
CPU Ratio Setting............:[Auto]
Intel(R) SpeedStep(TM) Tech..:[Enabled]
Intel(R) TurboMode Tech......:[Enabled]
Xtreme Phase Full Power Mode.:[Auto]
BCLK Frequency...............:160
PCIE Frequency...............:100
DRAM Frequency...............:1600
QPI Frequency................:[Auto]
DRAM Timing Control Sub Menu
1st Information
CAS# Latency (tCL )...............:7
RAS# to CAS# Delay (tRCD ).........:7
RAS# PRE Time (tRP)................:7
RAS# ACT Time (tRAS)...............:24
RAS# to RAS# Delay (tRRD)..........:[Auto]5
REF Cycle Time (tRFC)..............:[Auto]89
WRITE Recovery Time (tWR)..........:[Auto]13
READ to PRE Time (tRTP)............:[Auto]8
FOUR ACT WIN Time (tFAW)...........:[Auto]25
2nd Information
Timing Mode (CMDR).................:[Auto]1N
Round Trip Latency on CHA (RTL)....:[Auto]45
Round Trip Latency on CHB (RTL)....:[Auto]47
3rd Information
WRITE To READ Delay(DD)(tddWrTrd)..:[Auto]8
WRITE To READ Delay(DR)(tdrWrTrd)..:[Auto]8
WRITE To READ Delay(SR)(tsrWrTrd)..:[Auto]18
READ To WRITE Delay(DD)(tddRdTwr)..:[Auto]8
READ To WRITE Delay(DR)(tdrRdTwr)..:[Auto]8
READ To WRITE Delay(SR)(tsrRdTwr)..:[Auto]8
READ To READ Delay(DD)(tddRdtRd)...:[Auto]7
READ To READ Delay(DR)(tdrRdtRd)...:[Auto]6
READ To READ Delay(SR)(tsrRdtRd)...:[Auto]4
WRITE To WRITE Delay(DD)(tddWrTWr).:[Auto]7
WRiTE To WRITE Delay(DR)(tdrWrTWr).:[Auto]7
WRITE To WRITE Delay(SR)(tsrWrTWr).:[Auto]4
Ai Tweaker Continued
CPU Differential Amplitude.........:[Auto]
CPU Clock Skew.....................:[Auto]
CPU Voltage Mode...................:[Manual]
CPU Voltage........................:1.21875
IMC Voltage........................:1.10000
DRAM Voltage.......................:1.6000
CPU PLL Voltage....................:1.80
PCH Voltaqe........................:1.05
DRAM DATA REF Voltage on A.........:[Auto]
DRAM CTRL REF Voltaqe on A.........:[Auto]
DRAM DATA REF Voltaqe on B.........:[Auto]
DRAM CTRL REF Voltaqe on B.........:[Auto]
Load-Line Calibration..............:[Auto]
CPU Spread Spectrum................:[Auto]
PCIE Spread Spectrum...............:[Auto]
CPU Settings
CPU Ratio Setting..................:[Auto]
C1E Support........................:[Enabled]
Hardware Prefetcher................:[Enabled]
Adjacent Cache Line Prefetch.......:[Enabled]
Max CPUID Value Limit..............:[Disabled]
Intel (R) Virtualization Tech......:[Enabled]
CPU TM Function....................:[Enabled]
Execute-Disable Bit Capability.....:[Enabled]
Active Processor Cores.............:[All]
A2OM...............................:[Disabled]
Intel(R) SpeedStep(TM) Tech........:[Enabled]
Intel(R) TurboMode Tech...........:[Enabled]
Intel® C-STATE Tech ...............:[Enabled]
C-STATE Package Limit Setting.......:C6
Can someone post the Bios settings for Manually Overclock a P7P55D Deluxe.
Please post a form with the settings of the Bios which i have to fix manually and please tell me which Voltages i have to screw for overclock.
TNX
Surprisingly, with my i7 860 and ASUS P7P55D I just upped the BLCK to 180 and set the multi to 20x and left everything else on Auto (though I disabled Turbomode and the likes). I was left with a surprisingly stable OC for a full 12 hours of benching.
I'm now tweaking it to find the sweet spot that I'd like to run 24/7. I'll edit this post later with my detailed BIOS settings.