Printable View
I seem to remember having a look at this for Bowman1964..it doesn't have any hidden options so a compile would be needed.Quote:
Originally posted by TheDude
Bigtoe,
Is there a bios or is it possible to mod one that will allow memory timing adjustments on the Chaintech ZNF3-150 A64 Mobo?
Thanks :D
It would be quicker to moan at Chanitech and see if they come up with the goods...
Everything that was hidden is unhidden.I also relaxed memory timings the board uses during boot which should allow a higher clock...Quote:
Originally posted by NaHeMiA
bigtoe what features does your modded bios for the max3 have?
Bowman had a copy that allowed LIMITED adjustments, but he doesn't have it any more. How would I go about moaning at Chaintech? who would I contact that would give a damn and "be quicker"? Thanks ;)Quote:
Originally posted by bigtoe
I seem to remember having a look at this for Bowman1964..it doesn't have any hidden options so a compile would be needed.
It would be quicker to moan at Chanitech and see if they come up with the goods...
Bigtoe do you think that you would be able to cut the temp sensor in the bios for the Chaintech Apogee deluxe! because my NF7 is in for rma and this board f*cks up when going below zero or just cut the cpu overheat protection....when it goes below 0 degrees celcius in bios it starts reading 255 degress and then it just freeze
I may be able to get a contact at chaintech..leave it with me.Quote:
Originally posted by TheDude
Bowman had a copy that allowed LIMITED adjustments, but he doesn't have it any more. How would I go about moaning at Chaintech? who would I contact that would give a damn and "be quicker"? Thanks ;)
you need to link me or mail me the bios m8Quote:
Originally posted by Bra!nFreeZe^
Bigtoe do you think that you would be able to cut the temp sensor in the bios for the Chaintech Apogee deluxe! because my NF7 is in for rma and this board f*cks up when going below zero or just cut the cpu overheat protection....when it goes below 0 degrees celcius in bios it starts reading 255 degress and then it just freeze
Thank you Sir! A Chaintech contact would be invaluable to me. :DQuote:
Originally posted by bigtoe
I may be able to get a contact at chaintech..leave it with me.
Bigtoe here's the link that you requested http://www.chaintech.com.tw/tw/downl...B/7VJS0416.EXE
Btw i was thinking that maybe you could fix some dividers ?
whats a bios pls pm me thxs
I could kiss you, exactly what I was looking for.Quote:
Originally posted by Teus
is it possible to round up all BIOS files in the first post? once the thread grows it will become very handy
ECS K7S5A: http://www.ocworkbench.com/2002/ecs/...cheepobios.htm
Try thisQuote:
Originally posted by Bra!nFreeZe^
Bigtoe do you think that you would be able to cut the temp sensor in the bios for the Chaintech Apogee deluxe! because my NF7 is in for rma and this board f*cks up when going below zero or just cut the cpu overheat protection....when it goes below 0 degrees celcius in bios it starts reading 255 degress and then it just freeze
Thx i will try it out tomorrow
can u please mod a Bios for the Asus P4P800 Deluxe
what i want to change (if u can realize it) :
VCore: 1.4V til 2.05V
Vdimm: 2.55-3.25V
and a 4:6 or 3:5 "Teiler" (dont know the english word)
mfg
Christoph
EDIT: Here the Link to the original file @ Asus: ftp://www.asus.it/pub/ASUS/mb/sock47...0/P4p81012.zip
Please tell me what am I doing wrong:
Im trying to edit the latest Abit AI7 bios, to unhide those lower voltage options for cpu. When Im trying to load bios with Modbin6, it throws this error to my face:
http://mbnet.fi/elixir/Modbin.PNG
I also tryed to do this in pure DOS enviroment, but still it gives the same error. :(
Thanks in advance.
modded bios link for g-byte 7N400Pro and 7NNXP owners:
http://nforcershq.com/forum/viewtopic.php?t=25208
Are there any mods that can be done to V2 NF7 bios'?
Higher max vdimm would rock tbh :)
Where can i download that program? :) (bios editor)Quote:
Originally posted by The Stilt
Please tell me what am I doing wrong:
Im trying to edit the latest Abit AI7 bios, to unhide those lower voltage options for cpu. When Im trying to load bios with Modbin6, it throws this error to my face:
http://mbnet.fi/elixir/Modbin.PNG
I also tryed to do this in pure DOS enviroment, but still it gives the same error. :(
Thanks in advance.
Thanks man! Google is really a good friend but e wasn't this time! :D
Hy bigtoe i have an biostar nf3 150 barebone can you lokk at the bios to se if there is something hidden aka. higer vcore and ldt voltage??
and if there is some other things hidden make them visible!
http://www.biostar-usa.com/mbdownloa...el=IDEQ%20200P
There is only this one!
It is the one in the top!
Hallo Bigtoe dident you get my pm??? i will like to know if you can find some thing out whit this bios?
I would just post any questions. He is a really busy guy and get's a lot of PM's :toast:Quote:
Originally posted by Riska
Hallo Bigtoe dident you get my pm??? i will like to know if you can find some thing out whit this bios?
Your PM is probably in the same pile with a hundred others that he DONATES his time to try to help. I know how many PMs I get, I can only imagine how many he must get.
bigtoe your efforts are very much appreciated, we don't mean to take you for granted even though I'm sure we do sometimes.
hey, Bigtoe, would you be able to mod a bios for a Gigabyte 7N400Pro2 ultra? I was thinking of possibly being able to mess with the multiplier setting inside the Bios, instead of the dip switches, and possible a little more tweakage on the ram and GPA options, also if Im not asking too much, voltages? I know,,I want the world,,,but what else can a Goddess do? Course, Id take anything! :) I'll try and send a copy of the most recent bios...TIA!!! :)
EDIT: Heres a link to the Bios, :D
http://www.giga-byte.com/Download/Do...7n400p2_f5.exe
em... i'm modding abit nf7s rev 2.0 bios right now... try put some juice on bios 10 mix with bios 21... so how to check it work or not?
is there any program to test em... or i hav to flash it on my mobo 1st?