looking forward to seeing some more results when you can go cooler Afrokalle :D
Theres a big diff between 2D and 3D there...more than I was expecting!
Printable View
looking forward to seeing some more results when you can go cooler Afrokalle :D
Theres a big diff between 2D and 3D there...more than I was expecting!
Thanks gaidin :)
the differences came only from kind of cooling...
2D was cooling with Dice (-65°C outside the pot) and now 3D with the Single Stage (-45°C@Eva).
I think with Dice or better LN2 this 950 will run ~5250MHz or perhaps 5300MHz through 3D.
Heard from a friend that his 975 has coldbug@-120°C but in 3D06 CPU Test its running@-135°C - this new D0 CPUs scales very good with cold :up:
Great scores and yes, thanks to the master! (The one on the right of course!)Quote:
Originally Posted by Afrokalle
http://img222.imageshack.us/img222/21/cimg4230.th.jpg
Thx jAkUp :) are you the other one?
EVGA was always for enthusiast but Classified is a piece of art :worship: - pushing a i7 was never so easy...
I was hopin the 950 would do better, but those are still some nice clocks! Its getting harder not to upgrade to i7 :up:
Great chip you've got there
I also have this Batch - hope to do a 5.3ghz too .
batch 3845B027
http://valid.canardpc.com/show_oc.php?id=587080
#1 ranking on Hwbot
Sick clocks.
Congrats mate :up: this is really impressive...Quote:
Originally Posted by roller11
Think i have to test with only one memory module too :D
At the moment i try to get sub7min in Super PI 32M:
http://www.abload.de/img/32m8137.png
Single Stage -43°C@Load (no tweaks yet - only maxmem=600)
Pushing uncore helps a lot in 32M - this run is as fast as my Dice run @5250MHz with low uncore - so with 5250MHz + Uncore + CW i think i can break 7min barrier...
Afrokalle,
Your superpi performance screen is every bit as impressive as my max clock! :)
Can you explain "maxmem=600" ? I can find no 'maxmem' setting in BIOS. Also, is it possible to get lower than 16x uncore?
Thanks! roller11
Maxmem is set in OS (msconfig/bootini/advanced).
Nice scores Afrokalle :up:
If I'm not mistakin if you disable QPI Controller Setting this will give you a lower uncore.Quote:
Originally Posted by roller11
Thanks roller11 & loc.o :)
@drnip: if you disable QPI Controller Setting you will get a lower QPI Link Speed - some call it slow mode...
your uncore must memory speed x2 - so if you use memory multiplier x8 the lowest uncore multiplier is x16 (cpu-z shows uncore as nb frequency) - but you can choose a higher uncore multiplier to get faster L3 Latencies.
your i7 950 seems to be pretty nice clocker considering that your using only an SS to cool down that freaking hot i7 chip :up:
Excelent clocks! very nice :)
Thx mate :)Quote:
Originally Posted by Solarfall
i´ll test the 950 at the weekend with some liquid nitrogen :D
Tested yesterday the 920 with Dice again, and this CPU seems to be a nice clocker too...
Load VCore was around 1.45V for this speed:
wPrime 1024M:
http://www.abload.de/img/wprime1024mr9dj.png
wPrime 32M:
http://www.abload.de/img/wprime32mmbsn.png
Super PI 1M:
http://www.abload.de/img/sp1m3bmp.png
Super PI 32M:
http://www.abload.de/img/sp32mglrx.png
Pifast:
http://www.abload.de/img/pifastmamv.png
http://www.abload.de/img/sigjcz2.png
Did not have some memory with Elpida Hyper Chips (only Mushkin with Elpida BBSE) but at the weekend get some nice sticks from Corsair and 50l LN2 + 50kg Dice :cool:
Stay tuned :peace:
Hey there.. nice Job man.... nice Job.... very impressive... gotta play today for a while classified :D keep pushing :up:
Afrokalle, great results!!!
Congratulations.
I have a system close to yours, what vdimm did you use??
Nice Results :)
can you tell me why you dont use x24 moltiplier ?
bclk wall ?
Thx :)
@WCRF: we used for Elpida Hyper Chips ~1.76V - 1.82V and for Elpida BBSE ~1.70V - 1.76V (this chips do not scale good with vmem)
@aerie: x24 is not running as good as x23 - dont know why....
Is this Elpida Hyper the same of Corsair Dominator??Quote:
Originally Posted by Afrokalle
I'm asking 'cause I have the same RAMs
Elpida Hyper Chips are only on new Corsair memory (1866MHz C7, 2000MHz C8 & 2000MHz C7). You have (when we´re talking about the memory in your sig) the Corsair 1600MHz C8 - don´t know what chips on this modules - but definetly not Elpida Hyper...