Classified + 920 D0 + LN2 @ -186c

wow... awsome clock...
great chip...:up:

This Classified is incredible :cool:
nevermind the chip etc etc
this board is plain nuts!!!!!!

awesome stuff fellas :up:

Whats this "show" at scan?

It was a good day’s experience we all had, I must say this combo has surprised me also guys as the very low temps in which it could boot and bench at are just un-heard off, I think the benchmark and Bclock says it all.
I cannot wait until we get our hands on this setup again as a lot of ln2 went into finding settings ECT so next time we should be able to run a few more benches.

As for the event I will be attending this is the info: (Scan event) All are welcome to come and watch the action.

I think we also got a boost from your patented NTTS (neoprene thermal transfer system) Paul. :rofl:

Quote:

---

Originally Posted by raju

I think we also got a boost from your patented NTTS (neoprene thermal transfer system) Paul. :rofl:

---

Now you know how my secret on how we can get things to run that bit colder, it's all down to the NTTS :yepp:

Fantastic! I have the Classified sitting here staring at me now. It's my current memory validation and gaming rig but it is just begging to be OCed. I'm just waiting on a 2000C7 kit and a D0.

Good luck at the SCAN event! Of course, we all want more pix. Someone use a spy cam and get a shot of Raja.

Quote:

---

Originally Posted by Yellowbeard

Fantastic! I have the Classified sitting here staring at me now. It's my current memory validation and gaming rig but it is just begging to be OCed. I'm just waiting on a 2000C7 kit and a D0.

Good luck at the SCAN event! Of course, we all want more pix. Someone use a spy cam and get a shot of Raja.

---

i have the image already:D

Nice work guys, looks like a lot of fun :)

Quote:

---

Originally Posted by bazx

i have the image already:D

---

With or without the :banana::banana::banana::banana:stache? :rofl:

Quote:

---

Originally Posted by Yellowbeard

Fantastic! I have the Classified sitting here staring at me now. It's my current memory validation and gaming rig but it is just begging to be OCed. I'm just waiting on a 2000C7 kit and a D0.

Good luck at the SCAN event! Of course, we all want more pix. Someone use a spy cam and get a shot of Raja.

---

damn Mike
they always make you wait for good stuff :rofl::D

Terrifying combo I might say, both the Classified and that small dirty bustard (I'm talking of course about the i7 920 D0 you guys have) are simply :eek2:

Good luck on your future overclocking attempts guys ! :up:

Quote:

---

Originally Posted by Yellowbeard

I'm just waiting on a 2000C7 kit and a D0.

---

Quote:

---

Originally Posted by dinos22

damn Mike
they always make you wait for good stuff :rofl::D

---

Do you think we should chip in and buy Mike a set of Blades :rofl::sofa:

Quote:

---

Originally Posted by Yellowbeard

Fantastic! I have the Classified sitting here staring at me now. It's my current memory validation and gaming rig but it is just begging to be OCed. I'm just waiting on a 2000C7 kit and a D0.

Good luck at the SCAN event! Of course, we all want more pix. Someone use a spy cam and get a shot of Raja.

---

Believe it or not Mike the Elpida is kinda mandatory for stable BCLK benching over 240 on 2:8. The older modules sporting the early 1.65V stuff don't sit well with the i7 IMC up there. I suspect interchannel clock skews and drive strengths to be the issue, but we'll never get control of those as that is not how i7 rolls on that end. Everything is done on the 'matic so BIOS engineers only have to really apply start up timing for power cycles and MRC/MSR setting. Without the Dom GT, some of these benches would not have been possible.

later
Raja

Quote:

---

Originally Posted by sacha35

Now you know how my secret on how we can get things to run that bit colder, it's all down to the NTTS :yepp:

---

Speaking of temps, I'm thinking of getting one of Otti's pots. I think the extra mass will help us out below -150...

regards
Raja

Quote:

---

Originally Posted by raju

Believe it or not Mike the Elpida is kinda mandatory for stable BCLK benching over 240 on 2:8. The older modules sporting the early 1.65V stuff don't sit well with the i7 IMC up there. I suspect interchannel clock skews and drive strengths to be the issue, but we'll never get control of those as that is not how i7 rolls on that end. Everything is done on the 'matic so BIOS engineers only have to really apply start up timing for power cycles and MRC/MSR setting. Without the Dom GT, some of these benches would not have been possible.

later
Raja

---

hey,

Great review on anandtech! I saw you compared kingston memory vs dom gt.. you met a wall at 231Mhz with kingston?

Haakon

yeah, could not get the HT stuff to pass on 3d any higher. 2:6 was better for 32m and Wprime but did nothing to make the CPU test of 06 scale on the older memory.

regards
Raja

Wow quite an amazing 920 you have there :up: I love the -188... intel needs to make more chips like this one!

omg congratulations :) push harder we want 5.5ghz!!!!!

Oh man, I am definitely looking forward to using this combo. Classifed, right here beside me, 2000C7 GT on the way, 920 DO on the way, and now I need a proper bracket for my SS LS-1 Jinu modded unit.

I am impressed...
My C0 cant reach -80C
-186 is amazing
Congratulations

Grats, -186c is amazing!

Quote:

---

Originally Posted by OverDozeD

BCLK is just sick!!!!

What's max valie for it in bios?
my DFI has only 250

---

Gio my UD5 hat 1200 :D
but ....U Know what i mean ? :P


Classified is only board able to go over 250Bclk!

Nforce200 takes too much last from NB away
It mustnt handle GPUs directly
thats what this board gains for Bclk

and of course Genial Bios and everithing is perfect
just price ! :D