murderbox.009

Printable View

Show 100 post(s) from this thread on one page

04-21-2009, 10:05 AM
NaeKuh

Quote:

Originally Posted by nderscore

Probably means the serpentine grill that replaced the rear 2x92mm fans on the backplate of the TJ07.

OOPs i meant the rear 92x2.. :rofl:

its been a while since i had a TJ-07, b4 my days in XS.
04-21-2009, 10:10 PM
Jah

:eek: :shocked: :eek2:
Speechless, thats not a computer that is a work of art.
04-21-2009, 10:57 PM
charles_h

Quote:

Originally Posted by AlucardCasull

Very nice, is that mid-plate white plastic with a cathode under it?

Cheers AlucardCasull. :)

It's actually a bit more elaborate than that. It's not cathodes, it's lit by LEDs - the challenge was to diffuse them and create an evenly illuminated surface.

Quote:

Originally Posted by BDW88

Beautiful rig! Murdermods planning on selling those res holders?

Cheers BDW88. :)

Yes Indeed! We've got a number of different color options in the works.

Quote:

Originally Posted by oggie

Dont worry Charles, have found it on your site

Good stuff oggie. :)

Quote:

Originally Posted by shazza

I have been struggling for a couple of days to figure out what 120x2 you are referring to NaeKuh. Anybody care to help me?

I had the same problem shazza. Fact is, when you get a compliment from NaeKuh, you take it and you don't ask questions! :yepp:

Quote:

Originally Posted by SNiiPE_DoGG

OK so yes its beautiful beyond pretty much anything else BUT there is a serious lack of airflow in your motherboard compartment charles.... You need to have fans blowing on all the heatsinks in the build or your going to run into issues with heat and the lifespan of the parts you are using.

Cheers Ian. :)

I'm rigging up a temp fan that will be used till the next upgrade.

Quote:

Originally Posted by shazza

And, btw, Charles ... I think my previous post was lost. This is just a drop dead beautiful setup. Love looking at the pics.

Thank you Shazza. :)

Quote:

Originally Posted by Rasmus66

:eek2::shocked:

Amazing work:D

Looks very very good:yepp:

Cheers Rasmus66!

Quote:

Originally Posted by skinnee

Wowzers...that color scheme works perfectly! And the lightbox midplate is a genius of an idea!

Does the tubing pass through like the original midplate? Will there be lighting up top as well?

As always, excellent work Charles...what masterpiece will you present to us in the next installment of "As the case turns"? :D

Cheers Cam. :)

If I understand the question correctly; the tubing is connected to two fittings tapped into both sides of the light panel. This seemed more practical and solved the hose double radius issue going from the rad to the CPU.

Quote:

Originally Posted by Jah

:eek: :shocked: :eek2:
Speechless, thats not a computer that is a work of art.

Cheers Jah. :)
04-21-2009, 11:44 PM
Prince21

What is the exact tubing you use, the size of the tubes, also the connections on the tubing?
04-22-2009, 12:03 AM
EagleRock

Wow Amazing work :clap:
I want a MurderMod too :(
04-22-2009, 12:24 AM
Serpentarius

from a mod to an art ....
04-22-2009, 12:58 AM
twwen2

Loverly Charles, great color scheme.

Liking that mid-plate too. :cool:
04-22-2009, 01:20 AM
Tile

The craftsmanship in this PC is excellent. The clean execution, phenomenal attention to detail and the elegant and uncompromising style of the Murderbox systems.
04-22-2009, 10:01 AM
skinnee

Quote:

Originally Posted by charles_h

Cheers Cam. :)

If I understand the question correctly; the tubing is connected to two fittings tapped into both sides of the light panel. This seemed more practical and solved the hose double radius issue going from the rad to the CPU.

:toast:

Sorry, my Canadian is a bit rusty. ;)

Yeah, that is what I was wondering. As you stated, making the passthrough of the midplate into barbed connections makes the tube routing easier. You do think of everything!

As for the top lighting question, any plans to add light at the top of the case as well?

I can't wait to see what you create next. :up:
04-22-2009, 10:09 AM
NaeKuh

Charles i would seriously love to plan out one of your loops next time.

Im curious on how you'd pull it off with more h2o parts.
04-22-2009, 10:44 AM
bentleya

Quote:

Originally Posted by NaeKuh

Charles i would seriously love to plan out one of your loops next time.

Im curious on how you'd pull it off with more h2o parts.

Me too :),

Fantastic work charles :)
04-22-2009, 10:51 AM
skinnee

Quote:

Originally Posted by NaeKuh

Im curious on how you'd pull it off with more h2o parts.

Sit back, relax and enjoy the show.

http://www.xtremesystems.org/forums/...d.php?t=213395
04-22-2009, 10:52 AM
dsecrieru

Quote:

Originally Posted by NaeKuh

Charles i would seriously love to plan out one of your loops next time.

Im curious on how you'd pull it off with more h2o parts.

Hmmmm.... :D
04-22-2009, 03:08 PM
nderscore

My eyes must deceive me, or do you have a magical hard drive? It goes from being polished, to having murderbox text, back to being polished, and finally spawning a label. :confused:

Besides the magical hard drive dilemma, fantastic build and I love the "light floor". :clap:
04-22-2009, 10:20 PM
jpm804

This came together nicely .... love the res and light box floor turned out great. :clap:
04-22-2009, 10:30 PM
pphx459

Omg, amazing work! :shock:
04-22-2009, 10:42 PM
Metric

Quote:

Originally Posted by nderscore

My eyes must deceive me, or do you have a magical hard drive? It goes from being polished, to having murderbox text, back to being polished, and finally spawning a label. :confused:

The text was added in by photoshop, it's not really on there ;)
Great work Charles :) — you might be seeing an order from me sometime this summer if everything works out :up:
04-23-2009, 05:38 AM
lukashill

OMG! Thats sexy!
04-23-2009, 06:44 PM
alphadog009

amazing!!! want i dream of but will never achieve!!!!! can you kinda explain how you did the tube that goes from the cpu to the lower compartment... it has befuddled me
04-23-2009, 11:55 PM
PaRn ssR

:bows::bows::bows::bows::bows::bows::bows::bows:
04-24-2009, 06:59 AM
Lu(ky

My favorite one for sure charles :yepp:

I have two questions on your setup pictured below..

1. What tubing & size did you use?
2. What liquid or product did you use to make it red

You made me want to order some more stuff thru mudermods.. :rolleyes: lol like I need a reason to do that.. :D

Thanks....

http://www.murderbox.com/uploads/11.mb.009.1278.jpg
04-24-2009, 11:17 AM
RC-Junior

Dude, iI don´t know what to say, I am impressed

That is the best mod have ever see. :eek2:
04-24-2009, 06:41 PM
Erdrick1980

man that is one beautiful looking TJ07!:eek: makes me wanna order murdermod stuff, execpt they never have anything in stock..:shakes:
04-24-2009, 06:51 PM
Helfarch

Quote:

Originally Posted by Lu(ky

My favorite one for sure charles :yepp:

I have two questions on your setup pictured below..

1. What tubing & size did you use?
2. What liquid or product did you use to make it red

You made me want to order some more stuff thru mudermods.. :rolleyes: lol like I need a reason to do that.. :D

Thanks....

Looks like Tygon R-3400. Probably 7/16ID
04-24-2009, 07:12 PM
Ashraf

That is so murderbox. Charles, your work is outstanding!

Show 100 post(s) from this thread on one page