EK Supreme LT

Quote:

---

Originally Posted by mcoffey

Two feet away.???

BAsed on my control validation testing on my new bench, there can up to a 2 c swing between the 3 rad fan intake temps, so I'm not sure how you're accounting for something like that 2 feet away. It's amazing how fans can pull in different temp air from one to another. The side tanks alone can account for up to a 1 c swing between the outside fans and middle fan without a draft. With a draft from the wrong direction, even more.

Room ambeint temps is far from the air temp going into the rads.

Not putting down your testing, just though I'd mention it so you could check it out for yourself.

andyc

---

the sensors quickly change once air is moving next to them... the xspc temp sensor swings even when my hand hovers over it.......i only measure the room temp...

the picture i showed..just shows my cheap sensors...thats not how i measure ambient temps...

i'm just a regular overclocker with several blocks...i'm not sponsored by retailers whatsoever...

some low res pics added...

since this is my first liquidcooling i wont say this is the best block out there but its sure is great, i have 5ºc difference betwin cores even tho max temp i got was below 60ºc running linpack, i think i didnt put enough thermal paste or may be dirty inside block, maybe its normal? anyways this block is really nice.

room temp 22ºc
http://valid.canardpc.com/show_oc.php?id=507897
http://www.adriano-saunders.com/images/oc.jpg
id like to know if the difference is normal? :)

Just ordered one, shall be interesting to see how she fares against the Edge V1 she'll be replacing (seeing as the designs are so similar).

Quote:

---

Originally Posted by Envy

since this is my first liquidcooling i wont say this is the best block out there but its sure is great, i have 5ºc difference betwin cores even tho max temp i got was below 60ºc running linpack, i think i didnt put enough thermal paste or may be dirty inside block, maybe its normal? anyways this block is really nice.

room temp 22ºc
http://valid.canardpc.com/show_oc.php?id=507897
http://www.adriano-saunders.com/images/oc.jpg
id like to know if the difference is normal? :)

---

good temperature :up:. wanted to see a comparison between the current blocks.

that is one nice cpu...4.2ghz ht off...i will need at least 1.5v...

but anyways...testing is delayed...just ordered the dtek fusion2 mount from petras...it will arrive in afew days...so that will be included... will be changing out the loop too..so more flow on those waterblocks:up:

Quote:

---

Originally Posted by Hondacity

that is one nice cpu...4.2ghz ht off...i will need at least 1.5v...

but anyways...testing is delayed...just ordered the dtek fusion2 mount from petras...it will arrive in afew days...so that will be included... will be changing out the loop too..so more flow on those waterblocks:up:

---

With fits top too?

oh yeah that too..lol...

switching all my tops to ek xtop v2...

no more xspc tops...:D

pictures added...

True Silver Barbs FTW...

test: started

Quote:

---

Originally Posted by Hondacity

pictures added...

True Silver Barbs FTW...

test: started

---

Is it just me, or did you attach the Fuzion's mounting bracket on upside down here :confused:

i want max mounting pressure...:up:

Quote:

---

Originally Posted by Hondacity

i want max mounting pressure...:up:

---

Good stuff. Wonder if the LT can handle a hard mount though since it is not metal where it get's bolted down.

Honda, when will we get to see the results? Feels like ages!

done with the k350...ek supreme lt on the board at the moment...it flexed alittle..but i think it will be ok... will post tonight results...soon

2nd remount...and counting...

Honda do you have any flowtesting of the LT ? In this thread http://www.xtremesystems.org/Forums/...=213106&page=3 you only seem to cover the normal supreme which I understand is alot more restrictive.

And I guess the LT is good for any quads or is it i7 only (if you have tried a core2quad by any chance)

Its just the normal supreme is too restrictive for me (Will get Laing DDC 3.1 with XSPC res top and have chipset cooler and maybe gfx cooler as well in the same loop)

Very interested :)

Same here. Looks nice

no flow testing as of now...i'm nowhere near my pc. but yeah i will be testing the flowrates...

Sounds good :)

Review Update with Supreme LT and other Waterblocks, you may have a look:

http://www.hardwareluxx.de/community...d.php?t=549569

Quote:

---

Originally Posted by bundymania

Review Update with Supreme LT and other Waterblocks, you may have a look:

http://www.hardwareluxx.de/community...d.php?t=549569

---

Would really like to see it on a core2quad :/ but otherwise nice.

Quote:

---

Originally Posted by Mech0z

Would really like to see it on a core2quad :/ but otherwise nice.

---

I got my LT block yesterday, looks good, only few degrees better than my old Aqua Extreme MP-05 LE block on my Q6600 @ 3.8Ghz, test were made with DDC-2 18w pump + Petras top + Black Ice Pro 3 rad, 7/16 tubings, under Prime95 small ffts load got max 57/57/54/54 degrees C, its with Q6600 @ 3800 1.464v volts on Asus P5K-E board. And for cooling I use 6 x Zalman F3 120m fans at 7 volts (~ 1150 rpm). With MP-05 had 62/62/56/56 C max!

Also mesured water temps after rad, 26.8 C max, so is it good or not? 26.4 with MP-05, have to test mounting rotation too. Now ilnets ir horizonatly. Prime 3.9 easy, but could do that before :ROTF: