Printable View
EvoCarlos I can see you are very mechanically inclined,your work and construction ideas are great.............But your mom didn't teach you to pick up after yourself, did she ??? :) LOL I don't know how you find your tools. :shrug:
You need a full time helper to clean up. :up:
hey waltQuote:
Originally Posted by wdrzal
nope i,m a right messy git i keep everything lol and you will love this pic
hrrrmm rich (barron) playing with his end in the bat cave lol
http://i90.photobucket.com/albums/k2...o/DSC02470.jpg
oh and rich is going to clean it all up but he dont know about it yet lol :)
LOL I bet Rich wears that bright jacket with reflective tape just when he enter the Bat Cave so if lost ,he has a BETTER chance of being Found. :D
Thats not far from the truth m8 :rofl:Quote:
Originally Posted by wdrzal
It's an organised mess thou :up:
LoL playing with his end ....
it dont help tho once hes in there you cant find him lolQuote:
Originally Posted by wdrzal
its true thats all he did that day playing with his end :) j/k richQuote:
Originally Posted by sdumper
and here it is up to now
so ive put 2.4m of 0.8mm captube on the exspation tank as thats all i had left but i rapped it round the exspantion tank and put srink tube over the top lol
you can see the tank feed is brazed in at the suction conection
http://i90.photobucket.com/albums/k2.../Image0042.jpg
http://i90.photobucket.com/albums/k2.../Image0032.jpg
fitted the hi pressure cut off at the back out of the way and piped it all in
http://i90.photobucket.com/albums/k2.../Image0072.jpg
http://i90.photobucket.com/albums/k2.../Image0082.jpg
then the suction line and evap lagged and taped
http://i90.photobucket.com/albums/k2.../Image0052.jpg
captube 2.6m of 0.8mm
http://i90.photobucket.com/albums/k2.../Image0062.jpg
some heat and vac'ing and purging
http://i90.photobucket.com/albums/k2.../Image0092.jpg
got a new elec box today for £5 its got no rubbers on it like the last one and fit's in the spot better
also see the blue cable in the background this will be the new wiring for comps and solanoid problly
http://i90.photobucket.com/albums/k2.../Image1082.jpg
3 caps for 1st 2nd and fan
http://i90.photobucket.com/albums/k2.../Image1092.jpg
ahhhh dont they look sweet lol
i mean Dont they look MEAN MO fo's!!!!
http://i90.photobucket.com/albums/k2.../Image1102.jpg
its under 100psi presure test as it took 20mins to get 100psi in thru the cap tube so thats all its having lol
will do some more tomorow charging and testing :)
thanks for looking
carl...
wow, the unit looks very nice.
good work guys. :toast:
hello
did a bit of wiring just need to get my glue gun out and fix ever thing still in the box
http://i90.photobucket.com/albums/k2...2/Image111.jpg
i have also added a hi side port as vacing thru the cap tube was no good
http://i90.photobucket.com/albums/k2...2/Image113.jpg
1st stgae running pressuers and temps its a bit in vac but thats fine once under load that will change :)
http://i90.photobucket.com/albums/k2...2/Image114.jpg
and the evap temp as to now :) needs some more work yet tho
and the 2nd stage is just pure ethylene
http://i90.photobucket.com/albums/k2...2/Image116.jpg
Nice :)
Very nicely done!!!
Nice job. What discharge pressures are you running on the 1st and 2nd stages? Can't make it out on the gauges.
thank you :)Quote:
Originally Posted by Moc
thanksQuote:
Originally Posted by sdumper
hey err they wereQuote:
Originally Posted by [XC] gomeler
1st stage was 12bar
2nd stage was about 6bar
but i cant rember the esxact pressures i make them down next time i run the unit :)
did most of the finishing up today
i found out the fan blade that i bought a while back was a anticlockwize fan and the motor runs clockwize so it was pushing the air out of the case (not blowing on the comps)i try'd to run the motor in reivese but it just overheated so rich picked me up a new clockwize fan blade and boy it works well now :)
and 2nd stage is floped need to swap the comp for another one i think is just got to hot and caused some damage not sure on the oil content of the comp but it dont sound healty :(
anywho
doublebarrel wiring 1st and 2nd stage caps and fan cap with all switches wired in a nice little package all tested and working i have got to swap 2 wires on the back of the switchs as the 2nd stage can be started on its own atm so need to make it so it will only start after the 1st is on
http://i90.photobucket.com/albums/k2...2/Image149.jpg
http://i90.photobucket.com/albums/k2...2/Image139.jpg
nice little blue plug from maplins :) i have got 4m of blue 3 core 20a cable to to match the plug
20a twist lock 3pin mains plug its great :)
http://i90.photobucket.com/albums/k2...rev2/n54gb.jpg
http://i90.photobucket.com/albums/k2...rev2/n55gb.jpg
http://i90.photobucket.com/albums/k2...Image127-1.jpg
also made a bracket to hold the suction line safe and put the lid on to make sure it all fits :)
http://i90.photobucket.com/albums/k2...2/Image126.jpg
http://i90.photobucket.com/albums/k2...2/Image135.jpg
i´ve bought a 8 pin speakon plug but with 30€ they are realy expensive :D
so for power suply i would use a normal connector (the one we know from computer power supplys)
well, maybe i should also switch to the speakon plug for the power :D
Very nice wiring it can be such a pain to try and fit all the wiring into cramped boxes like that. Well done!!
hey patrickQuote:
Originally Posted by Patrickclouds
i use'd the 3pin psu mains lead on my vapo :)
http://i90.photobucket.com/albums/k2...o/Image073.jpg
i did look at the speakon plug but i thought they would not be strong enuff for wat i was pulling thru them
the plug i have use is made by the same people but its made of mains voltage :) some info here
yeah you´re right.
i thougt they are both called speakon. but the speakon are for use in the hifi segment and the power-con are used for power.
the power-con is a very good looking idea.
thanks for the pdf ;)
thanks sdumper it took a few hours to do but the result was nice i thoughtQuote:
Originally Posted by sdumper
np :)Quote:
Originally Posted by Patrickclouds
pictures say a 1000 words and i dont feel like talking:(
http://i90.photobucket.com/albums/k2...2/Image000.jpg
http://i90.photobucket.com/albums/k2...2/Image006.jpg
http://i90.photobucket.com/albums/k2...Image007-1.jpg
http://i90.photobucket.com/albums/k2...Image010-1.jpg
http://i90.photobucket.com/albums/k2...2/Image005.jpg
Holy smokes nice temps at 200w load, Are you evoloading it or is the second stage complete?
thats 1st stage temps pressures with 200w on evap after 1hourQuote:
Originally Posted by teyber