Hi, there mate yeah got sythe mine cooler 3.8 idles 36 load 63 v/core 1.5 cheers man for msg.:up: got few fans in case mounted on cooler push pull fans mounted over pwr and over ram.Quote:
Originally Posted by KELL5
Printable View
Hi, there mate yeah got sythe mine cooler 3.8 idles 36 load 63 v/core 1.5 cheers man for msg.:up: got few fans in case mounted on cooler push pull fans mounted over pwr and over ram.Quote:
Originally Posted by KELL5
@KELL5: :D I canno't bench @9x470. I'll give a try when I'll finish my RIG ;)
Nice Vcore & RAM setting :)
Only a screen for me :(:
http://images3.hiboox.com/vignettes/1308/yfemcxax.jpg
@dan7777: For the Vcore, it depends on what your Q6600 is capable of...
I need less than 1.35v (bios) for 3.6Ghz & +/-1.50v (bios) for 4.0Ghz
& BTW, keep it cool, Q6600 can get really hot ;)
cheers Mr.rob :)
what's the aquasuite app you have there?
damn what are your vids?
mines absurdly high can't get past 3.4 without getting into upper 60's with a true 120
1.2350v vid here
here's my vid, temps and other small odds and ends.
i should have a new cpu block sometime this week, and hopefully my pa 120.3 will come in...(if you guys didnt know, NCIX has them for like 80$ right now or something!)
http://img.photobucket.com/albums/v3...psandstuff.jpg
@KELL5: Aquasuite is the main prog that control my Aquaero.
My VID is 1.2250v December 2007
@1.088v, 2.970Ghz ;)
@xdrift0rx: I love your wallpaper :d:d:d
If you want some exclusive info about my futur case: http://www.nokytech.net/forum/waterc...-_-117725.html
(I'll do a worklog here soon ;))
mr rob i,m on phase cooling (modded vapochill ls)
the vid of my chip is 1.2875v
doing a test atm for water cooling people atm to prove you dont need huge rads using a single 120mm rad with 7v 1200x38 delta fhe with my quad 2 volt modded 2900xt's and temps are fine !!!!! below 60 degrees
wouldnt have a link to the desktop background...
btw nice o/c on air :p:
It's not on air, the only reason there is a cpu fan there is becasue i plug in a fan on that header to cool my northbridge :P it was the easiest/cleanest solution.
Drift I am pretty sure that I have a 680i NB waterblock floating around here somewhere, if you want it just PM me and pay shipping. I want to see how far you can push that 680.
It kinda pisses me off that some people get these killer 680i's and I went through 5 bad ones before I cut ties and went P35....
Awesome clocks!
well i just tried to see what my lowest voltage is...and......this is what i have.
i think this is fairly decent for minimum voltage. isnt it?
http://img.photobucket.com/albums/v3...rx/voltage.jpg
Very nice :clap:
But is it stable?
You guys got me tryin' it now :)
This is lowest vcore I can get 3800mhz to pass fritz :)
http://thumbnails16.imagebam.com/244...6024412809.gif
I'm gonna try a new NB cooler in a day or so.
@ KELL5
http://i292.photobucket.com/albums/m...zOverclock.jpg
:yepp: 1.328v @ 3.8GHz
Is that 1.304vcore and the VID is 1.225v?
Can't really read it easy.
Yes thats correct. sorry screenshots from a 1920x1080P resized ( my tv ) My 24/7 OC ;)Quote:
Originally Posted by fatguy1992
How about some all on air single card 3d stable ownage :D Not optimized/no Lod tweaks ( still need to load my special bios, I ran outa ram clocks ) :eek:
http://service.futuremark.com/compare?3dm06=9627529
http://members.cox.net/chewxs/4050.JPG
hm nice results,
i pushed up my Q66 to 4500 MHz
http://valid.canardpc.com/show_oc.php?id=482464
Nasty overclock.. only if that was stable. hahaQuote:
Originally Posted by joker_x3
with 4325 MHz
it was quite stable ;)
4500 was only for cpu-z :-D
nice work. Best I was able to do was 4.1 or so when I first week I had my Q6600. Just super pi single thread stable at that clock, with loads of voltage. Air temps was room temp.
these are good chips, but you have hit you're max, unless you get some crazy ln2 or what not.
mine just hums along at 450x9..it's fine for my needs...
i stresst my cpu under dice :-D
so it was quite easy, but i cant go higher cause of my ram -_-
it was only ddr2-800, they wasnt enbaled to get more than 500MHz ...
When i have dice for the next time i will have ddr2-1066, too :-P
Awesome :clap:Quote:
Originally Posted by joker_x3
What cooling?
Edit: Just read ur later post.
@Chew*
Heres my best 3D Mark 06 with a single 4870. My 4870 doesn't overclock as good as yours :(.
http://i292.photobucket.com/albums/m...ark06Score.jpg
Once my Phase arrives i'll be able to run like 4.2GHz+.
this is my best 3dm06 score with Q66
an a none Oced GTX 260 216sp
http://saved.im/odm4mtzhm2pj/3dm.jpg
if time comes, new ram comes :)
and then im able to push it higher