maybe try a bat file with a waiting time?
Printable View
maybe try a bat file with a waiting time?
I am using k10stat as well to tune my laptop Compaq CQ40-401ax
Currently using this setting
2.2GHz 1.01V
1.1Ghz 0.80V
550MHz 0.75V
Load temprature went down to 93C from 100C (stock setting) :up:
new version K10 stat 1.32 here
awesome! thanks flank3r! :up:Quote:
Originally Posted by FlanK3r
this should be sticky. please
Anyone with a lower stable voltage for stock 620?
Using K10stat right now on my AthlonII 620, at "very low Profile" (browsing, email), I am using .8V@622Mhz for a very long time now...Cool 'n Quiet turned on and pwrprofile set to "balanced". Win7 Ult x64Quote:
Originally Posted by Nintendork
Tried to set NB DID to 1 to lower NB frequency and voltage on version 1.32 but doesnt work... CPU VID would nolonger available to change and locked to default before next reboot. Does anyone have the same issue?
I should check that new version of K10stat, these screens are with the earlier one...
http://img694.imageshack.us/img694/6...dervolt.th.jpg
http://img693.imageshack.us/img693/7...ervolt2.th.jpg
http://img696.imageshack.us/img696/5...ervolt3.th.jpg
Right now I am running at 1 GHz @ 0.9V. I didn't tested for stability in any setting, just figured out when I can't get it lower any longer because the machine just freezes as soon as I apply a lower Voltage setting. I think than the Voltage could go an step lower at 100 MHz to just 0.600V, but at 0.5875 it freezes instantly. I didn't touch anything related to the Northbridge Frequency or Voltage, maybe I should mess with it because is a waste of resources get it running at 2 GHz when the Cores themselves just match a K6-II or so, same with the Memory Modules Frequency.
I recall than someone that I know than had an in depth knowledge of electronics said that transistors (Or some other component, or silice itself. I don't remember) could't work at Voltages lower than 0.6 or 0.8V because it was not enough current to open the transistor gate, or whatever it was. Does anyone knows about that? It means that I dd hit a physics limit?
I should also add than my AIIX4 620 got a CACYC Stepping (More precisely, CACYC AC 0937DPMW), so it means that it is a full Deneb. So far, I have been unable to even boot when using ACC and Unleashing Mode to see if I can get the Cache L3 to work.
I builded this computer yesterday (After a whole four years with an A64 3000+ Venice DH-E6 with an ASUS A8N-VM CSM), with this AIIX4 620, an ASUS M4A785TD-V EVO and a pair of 2 GB GSkill Ripjaws F3-10666CL8D-4GBRM.
http://img406.imageshack.us/img406/3936/zirj.th.jpg
2600Mhz @1.1125v
1900Mhz @0.925
1400Mhz @0.875v
800Mhz @0.75v
2600Mhz @1.025v = System restart
2600Mhz @1.05v = OK (bump it for safety)
800Mhz @0.7v = System restart
*BUMP*
I have noticed that K10stat 1.41 for some reason removed the NB DID (It was either 0 or 1, it just halves the current IMC Frequency) that in 1.32 was available. The readme.txt changelog includes something that specifically talks about NB DID in the 1.40 version:
@@ NB DID•\Ž‚Rev.C3‚Rev.DA-C2‚‚‚ɐŒ
But as I don't understand what the hell that means (Besides the fact that it is related to NB DID, Rev. C3 Processors, and for some reason specifically talks about Rev. DA-C2), I don't know why it was removed. Anyone can translate that? Oh, and if someone knows who makes K10stat, please tell that guy that he should include english documentation for a more widespread understanding.
where s MAD?? he know maybe (he is from H-K)
1090T use K10STAT v1.41 shortcut add this :
-mp: 4 -nw -StayOnTray -lp:0 -ClkCtrl:1
K10STAT v1.41 http://sites.google.com/site/k10stat/
why can't run 5 step on a K10STAT ?Quote:
Originally Posted by HanaJetso
so, change like this. :(
*BUMP*
http://sites.google.com/site/k10stat/
K10STAT154.zip Aug 6, 2011 5:09 AM
Would love to see that Changelog in english...
wow i did not notice this update
It would probably say support Llano since previous does not work and this does.Quote:
Originally Posted by zir_blazer
will be some simillary for FX? (without AOD soft?)
Hmm thats a tough question flanker.Quote:
Originally Posted by FlanK3r
I guess it would depend on how it can adress the modules or cores.
I just checked out 1.54 on Llano, works no different than 1.53, no noticeable changes. It's probably a bug fix over 1.53.
Can you do anything interesed with Llano you weren't able to do before? Besides, do you have access to K10stat beta versions or something? There is a jump from v1.41 to 1.54 in a one year lapse, though the Changelog seems to show that there were many in-bewthem versions...Quote:
Originally Posted by chew*
He just removes versions and keeps up the latest bug fix.Quote:
Originally Posted by zir_blazer
Older versions may however work better with older models.
Can this program adjust FSB on 890FX chipset?
Someone please confirm it working and the motherboard you used.
Thanks..
multi and voltage only not fsb.Quote:
Originally Posted by smpsys
I can guarantee you that I checked that link one or two months ago (I usually download the last version of my commonly used tools everytime I'm getting ready to tweak a fresh machine) and the last version was the 1.41 from one year ago. I still believe you get these versions elsewhere, otherwise is hard that I have missed a new K10stat version as I checked regularily that site. Except if he released several succesive versions in just two weeks or so...Quote:
Originally Posted by chew*
1.53 was available about 2 weeks ago. 1.54 supercedes it, it has to be maybe a few days old and no point of having 1.53 up for DL?
I have 1.53, I can send it but theres no magic over 1.54.
I know about a month ago nothing was available.