Biostar X58 Core I7 920 @ 4545MHz (my first try on air)

Quote:

---

Originally Posted by Pt1t

with First bios on sample board board i had to do also that on 965xe , i had Max multiplier of 24X via ONE , and i had to change max multiplier in turbo Boost menu. I think it s easy to fix on 940 B0.

---

good to know Thomas and now you can use the O.N.E. navigator to set the multiplier rite?

Setting by O.N.E. is better than Turbo Mode cz when i use Turbo the multiplier droops alot(-0.5x) with oscillation on the final clock and its hard to save the highest clock :( and its not happen with O.N.E.

following here i have acess to 22x on 920

Quote:

---

Looks like there's more uses for Intel's Turbo mode on DFI UT X58-T3EH8 especially for single threaded benchmark/apps like Super Pi. In bios set Turbo enabled, EIST enabled, Set to 1 core enabled and you have access to fixed 22x cpu multiplier

---

http://www.xtremesystems.org/forums/...8&postcount=20

but i dont need to droop to 1 core ,Biostar Tpower X58 just works fine with 22x and all cores enable(i havent tried HT on) and its all air :)

http://img201.imageshack.us/img201/1460/22x920lp5.jpg

:)

and i tried some LN2 with my unlocked 940 but i had some multipliers issues ,i started with 31x but after 3 minutes of testing it drooped to 28x ,27x etc and i never get a higher multiplier again :S

http://img222.imageshack.us/img222/2424/cpu4907ye6.jpg

4900MHz was the best clock before finishing and now im waiting for a fix