Project: ATCS 840

Quote:

---

Originally Posted by BlueAqua

Damn those fans are HUGE! The radiator looks so small in comparison.

Btw, what happened with your Skulltrail build log? I can't find it.

---

Probably at the back of the pile by now lol but its in me sig mate :up:

Quote:

---

Originally Posted by spotswood

Holy dead spot, Batman! :shakes:

---

You're not kidding.......i'm going to play with a few different fan configs before making any final decisions.

Quote:

---

Originally Posted by Polizei

I just IMed a friend of mine to say "coolmeister started another build... check it out" and he replied to me, "You fool, I showed you that build two weeks ago. He mounts a DDC top to the back of a bay res... remember?"

Of course, I scroll down several more pictures and see it. :am:

I don't know how much I would trust that DDC mounting without any gaskets, especially if it's a show case that's going to get moved around a lot.
In any event, excellent work so far. :up:

---

That'll be the alcohol then Polizei :yepp:

Second res turned up this morning so i can set about making a second res / pump combo but still a long long way to go on this one as other commitments keep getting in the way :rolleyes:

Nice way to mount the rad, keep the pix coming!

Quote:

---

Originally Posted by coolmiester

That'll be the alcohol then Polizei :yepp:

Second res turned up this morning so i can set about making a second res / pump combo but still a long long way to go on this one as other commitments keep getting in the way :rolleyes:

---

Alcohol? :confused:

Quote:

---

Originally Posted by Polizei

Alcohol? :confused:

---

My bad, thought it may of contributed to why you forgot about the mod in the first place but obviously not :shrug:


Anyway, managed to sneak a bit of time this afternoon to de-rivet the entire chassis to make it easier for working on and anodising or powder coating......still haven't made my mind up on which to go for yet.

Chopped out a bit of the hard drive cage to allow for the GTX240 rad to be mounted to the base then used one of our silver honeycomb grills for a template to mark out what needs removing from the base section.

I'll have to make a decision on colour and by what method pretty soon but a quick mock up shows how it will look.

I'm happy with that!

http://www.coolercases.co.uk/atcs_840/atc_14.jpg

http://www.coolercases.co.uk/atcs_840/atc_15.jpg

http://www.coolercases.co.uk/atcs_840/atc_16.jpg

http://www.coolercases.co.uk/atcs_840/atc_17.jpg

http://www.coolercases.co.uk/atcs_840/atc_18.jpg

Quote:

---

Originally Posted by coolmiester

My bad, thought it may of contributed to why you forgot about the mod in the first place but obviously not :shrug:

---

Oh, no worries mate. I see what you meant... I had just gotten out of bed so my mind was a bit foggy.

Alcohol would have made me forget had it happened a couple weeks ago... hoo boy... half a bottle of whiskey is not a good idea. :down: :rolleyes:

Nice work. I'm about to start my new build with the same case.

Nice Job !

It's impossible to buy thi case for the moment in france ! I want to know 2 things : (to install a Black ICE GT Xtreme 420 (3*140 and 54mm)

- Is it possible ton fix watercooling radiator 3*140 on Two big Fan at the top ? (like you with your 3*120)

- Is it possible to install hlabs "GTX" model 54mm instead of 30mm without problems ?

I discover it's not easy to speak watercooling in english for me :D

Thanks a lot

wohhh~! another masterpiece :up:

Nice job as always Wating for the painted thing unrestedly

Masxerofkartis

P.M. Dont actually know if the bleedin word even exists but its difficult to find a word in english for every nice word in greek :P

Nice build going can't wait to see the end result!

Very nice work coolmiester

I'm struggling to find someone who supplies this case from the UK, where did you get yours from?

According to CM they should hit the UK shelves by Friday 12th of December or there abouts :up:

Beautiful work coolmiester :) I unfortunately had huge difficulties mounting my rad to the top 230mm fans so I just gave up =[ Mounted it normally like it shows in the manual :P Even that was hard as hell as I had huge trouble getting all the holes to line up and such :) Subbed

Quote:

---

Originally Posted by soulesschild

Beautiful work coolmiester :) I unfortunately had huge difficulties mounting my rad to the top 230mm fans so I just gave up =[ Mounted it normally like it shows in the manual :P Even that was hard as hell as I had huge trouble getting all the holes to line up and such :) Subbed

---

I presume it depends on which radiator you're using as anything other than 15mm hole spacing and the mounts will not line up though given the mounts are made from plastic it would be easy to make adjustments to fit.

I originally tried it with an early XSPC with 17mm holes and not all holes would line up though it was possible to get bolts in enough to make it secure.

Mine was an early sample so never got the luxury of a manual.

http://www.coolercases.co.uk/atcs_840/atc_19.jpg

80% of all radiators have 15 mm spacing, so it should be fine in most cases. Long holes would have been possible to have it compatible with bigger hole spacing as well.

yes, I believe all rad mounts of this type should have slotted holes, but 15mm is the standard we are approaching in the industry.

updates? :P

Not much of an update at all tbh but never-the-less i got a few pictures of the chassis back from powder coaters in satin black.

I also spoke to Willie at HWLabs earlier in the week who is going to pull all the stops and try to get me a custom GTX360 X-Flow radiator for the top as i find that its much easier to route hoses and it gives an overall much cleaner look so massive thanks the Willie for that :cool:

......i just got to work out how to put this oversized jig-saw back together :ROTF:

http://www.coolercases.co.uk/atcs_840/atc_20.jpg

http://www.coolercases.co.uk/atcs_840/atc_21.jpg

http://www.coolercases.co.uk/atcs_840/atc_22.jpg

http://www.coolercases.co.uk/atcs_840/atc_23.jpg

I can't wait till that project is done ^^ looks great imho

How much did it cost to you get all those parts powder coated? Is this cheaper/better then anodized?

holy cow, I didn't know a rad of 3 could fit there! subscribed !! interested on this build! hey cooler can a fesser of 3 fit there??? highly interested on response

Great work as always Coolmiester, do you think it's possible to fit a Feser 360 rad with fans in a push-pull config up top?

Quote:

---

Originally Posted by Blacky

holy cow, I didn't know a rad of 3 could fit there! subscribed !! interested on this build! hey cooler can a fesser of 3 fit there??? highly interested on response

---

Yes it can.

Still waiting on a few bits so i can start the exterior so thought i'd put the chassis back together and i got to say its looking real nice and can't wait to start filling it full of new hardware.

As you can see, to fit the HWLabs GTX240, i had to remove part of the hard drive caddy so it can only take three now but then that's never bothered me in the past.

Also nice to see CM go with the black quick release buttons on this as they fit in much better with the colour scheme.

Man, i just love starting with a blank canvas like this....

http://www.coolercases.co.uk/atcs_840/atc_31.jpg

http://www.coolercases.co.uk/atcs_840/atc_26.jpg

http://www.coolercases.co.uk/atcs_840/atc_27.jpg

http://www.coolercases.co.uk/atcs_840/atc_28.jpg

http://www.coolercases.co.uk/atcs_840/atc_29.jpg

http://www.coolercases.co.uk/atcs_840/atc_30.jpg

Still loving ur stuff!