Printable View
1080 Mhz with 1.93 nice speeds i think :p and less voltage than stock with higher speeds from stock :P
those mems are rated 1066Mhz 2.1V 5-5-5-15
all the voltages are measured with Digital multimeter
http://img186.imageshack.us/img186/9223/shot0003os1.jpg
a bit higher 1100Mhz
http://img55.imageshack.us/img55/7742/shot0004fh8.jpg
vatos-
Try these (mine were at 1.9v) at 1:1.25
http://i383.photobucket.com/albums/o...an/Memset2.jpg
All the "other timings" are set to 3 in the bios. The pro will add to them automatically.
I'm not sure an Abit pro will go above 1150 MHz on RAM.
with the old mem i could play max 1200 4-4-4-4 but
i'am stuck with PL7 i will try it
but first explain me what timmings you want
5-5-5-12 and tell me all the subtimings names and values to set them becouse memset does not work for me :(
Memset doesn't work with an Abit Pro because the MCHBAR is locked. There is a modified bios to work around it, but I've never used it. PL is determined by the spec of the RAM, speed you are running it, and the divider you use. That's why my Team 667 runs PL5 and my Mushkin 800 ran PL6..Quote:
Originally Posted by Vatos_locos
The subtimings in your bios are
tRFC-55
tWR-3
tWTR-3
tRTP-3
CR-Auto
Here is a link to the moded bios options:http://www.lejabeach.com/ABIT/IP35Pro/
i have the moded Bios but memset it does not work at all :p:
my old teams ran @ PL5 :S
i'll give a shot with the timings you want :)
18 is # 1 all yours :)
also 1.89V
seems crap to me compare to yours :p:
Nope, the RAM is fine. The Everest numbers are because my clock is at 3.85 GHz (E8400). You're running 3.4 GHz (very respectable for a quad). Can you go up to the next divider (1:1.5)? I don't think so, but give it a try.Quote:
Originally Posted by Vatos_locos
at 535Mhz again ? i think i can i will try :)
here it is @ 537 Mhz with 1:1.5 ( 2:3 Divider ) 1.89V
i noticed that you have your mems with CR 1 my run with 1:25 was with CR2 but not a big difference :p:
Everest shows CR2 (and so will CPU-Z), that setting in bios evidently doesn't really change anything unless you have an Nvidia based mobo.Quote:
Originally Posted by Vatos_locos
You've got the divider, now start seeing how far up you can raise your FSB.
You dropped from 428 to 358, now start going back up slowly.
indeed everest shows Cr2 :p: the mems can go up to 1111Mhz stable i tested them yesterday with the 1:2.0 divider :p: @ 1112 i get a random errors in memtest loop 5
those are going to be my 24/7 i wend down my cpu from 3.8 tho :( but this is just until my quad leaves this board :) it for sale now i'am going for one E8600
Your FSB will make a bigger difference in performance than your RAM. It's still nice to know how high that RAM can OC.
yhea i know but it's for physiological reasons lol
and it wont make a big difference in real life from 3680 to 3840 where the chip maxes :)
and lower voltages less heat and blah blah :p:
but i'm impressed with this kit 1100 is more than fine with 2x2Gb and 9xxxMb/s Read
i'am really going to miss my good GKX's hiting 600mhz 5-5-5-15 24/7 but Vista needs RAM :)
so i think one E8600 will be better in this set up and i will able to have more cpu circles eg. 550x8 and the mem's 1100 1:1
will see :)