Nice clock! I love your 13K Read!
Keep pushing, good luck!
Printable View
Nice clock! I love your 13K Read!
Keep pushing, good luck!
Got 4 errors on the 4th loop at DDR3-1450 5-5-5-15 1T :(
Dropping down to DDR3-1420 now.
BenchZ
what are you getting on everest for 5-5-5-15 1T 1420 reading?
That depends quite a lot on the FSB used and the rest settings.Quote:
Originally Posted by slim142
With Linked & Synched FSB/DRAM the Read BW should be around 10k and write/copy at 7k something.
With higher FSB and unlinked RAM it could be near 12.5k ( FSB > 500MHz ).
Currently @ loop 39, error-free :)
One last questionQuote:
Originally Posted by BenchZowner
With 1.90vdimm (real), what is the highest speed/latency you can run those sticks?
I have to test them first with 1.90V real and I'll let you know.Quote:
Originally Posted by slim142
I expect DDR3-1800 7-6-6-19 @ 1.9V and maybe DDR3-1900 8-7-6-21 @ 1.9V.
We'll find out soon.
Bill, are you going to run tests on Intel chipset (X48-P45)???
I like these sticks^^
I have heard people getting up to 1800 8-7-6-18 with 1.90. I hope with some tweaking you can get higher (and share the settings :D)Quote:
Originally Posted by BenchZowner
I love them too :cool:Quote:
Originally Posted by WaterFlex
@dread77:
I'm gonna test them on various motherboards m8 before I review them.
Already gone through the Asus P5K3 Deluxe, Asus P5Q3 Deluxe, now testing on the Striker II Extreme and later on the P5E64 WS Evolution ( X48 Workstation board ) and maybe on a Rampage Extreme as well ( that depends on the golden lady a.k.a. Vivian ).
They seem to be fully stable at DDR3-1451 5-5-5-15 1T.
At 1450 Linked and Synched they'd error, but that's due to the Striker II Extreme so it seems, as at 1451 Linked & Synched everything is fine, memtest86+ test #5 35 loops error-free, and benching ok.
http://i37.tinypic.com/2cyrwxw.png
http://i34.tinypic.com/9734f6.jpg
http://i33.tinypic.com/339oh9c.jpg
last screen voltage ??
~2.23V
---
6-5-5-16 seems to be stable at DDR3-1600+... memtest86+ test #5 40 loops error-free easily but 1610, 1620, 1650, 1700 isn't working, probably it's the Striker II Extreme screwing ( bolts :p: ) around again.
Will have to re-check on other motherboards thoroughly.
you are not stable @ 1000 cas 7 with 2,23v ??
They're fully stable at DDR3-2000 7-7-6-21 1T with more relaxed sub-timingsQuote:
Originally Posted by aerie
BenchZowner
Also stable in Win Memtest ?
Don't know about Win memtest ( I assume that you are talking about the Windows Memory Tester from HCI Design inc. ), but SuperPi 32M and some Linpack was ok.
Quote:
Originally Posted by BenchZowner
The fact is that SuperPi and LinPack don`t load RAM as it Win Memtest does.
I passed 200 cycles in IntelBurnTest at 2,06Vdimm and had no errors. But I had 2-4 errors after MemTest testing. To get stable I had to increase Vdimm up to 2,14(actual).
MemTest 3.7 is the real killer of RAMs :D
Try to pass it mate.
e8600 q822
rampage extreme
CSX diablo 2x1gb D9GTR @ 1,96/97v
sapphire 4870
all@liquid cooling
mem tested with memtest 3.7
he is talking about this:
http://www.hwmania.org/forum/imageho...285d2690d6.jpg
Yah, I know that proggie ( http://hcidesign.com/memtest/ )
Currently memtesting at DDR3-1900 7-6-5-18 :D
thats right :)
post your result with relative voltage :=) GOOD LUCK AND HAVE FUN :)
Benchz
Whats the trick to achieve 100% stability with this sticks on the Striker II at high speed/tight latencies with 1T?
I always had to keep command rate on 2T to keep stability on nForce boards...
Hmmmm... DDR3-1900 7-6-5-18 1T :D
http://i34.tinypic.com/144ac88.jpg
http://i38.tinypic.com/35jmjgz.png
http://i37.tinypic.com/293ja6h.jpg
http://i34.tinypic.com/1zvd1tk.jpg
http://i38.tinypic.com/161i8g8.jpg
More to come....later on, or tomorrow :D
Do you think BIOS 1104 could help you to break that 13k barrier :D
Just fooling around before I go to bed :D
Sub-timings fully relaxed needed a quick 2GHz+ test :p:
http://valid.x86-secret.com/show_oc.php?id=425320
http://i36.tinypic.com/2hcgryg.png
http://i36.tinypic.com/2cqcie8.jpg