Fantastic Biobio TP45 HP : WR E8200/E8300/Q9450/X3360 ...

Quote:

---

Originally Posted by boblemagnifique

Just for you , your desire becomes Reality my dear gautam :D

http://valid.x86-secret.com/cache/screenshot/391793.png

http://valid.x86-secret.com/show_oc.php?id=391793


Vcore : 1.85v
VNB : +0.7v
Vfsb : +0.35v
Vddr : + 0.9v

Temp Evapo : -109°
Temp Liquid Chiller : -25° (in the reservoir) for the NB !!

More Pics soon ;)

---

:clap:

Chip did arrive, it is looking quite good. ;)

@boblemagnifique,
hats off to you, fantastic result.

Damn Bob! I have a Q9450 and can only reach 479 FSB on AIR!! (P5E3 Prem)

Awsome results, was that Q9450 on Cascade?

Very Nice!!!:clap::clap::clap:

My biostar tpower I45 is on the way, I hope to join you soon :D:yepp:

I also have TP45 with Q9450 on it. Since im a noob overclocker, I need suggestion from others.
My sys :

TP45 + Q9450
2x1 Gb Kit Adata Vitesta 1066++
500Gb WD
HIS X1650 IceQ
Point Of View Black Diamond 550W
Asus Triton 79 Air Cooling

Can only hit 441 FSB with 1:1 DRAM config. Should I change to some water cooling to get higher FSB? What do think guys?
Should I change to better graphic card?
Some pics..
http://i346.photobucket.com/albums/p...starTP45HP.jpg

BIOS setting :
All AUTO except :
Ratio CMOS setting : x8
Intel Speedstep Technology : Disabled
CPU Freq Setting : 445

Need help and advise.... :shrug:

Quote:

---

Originally Posted by overcrash

107% on the E8300, what can anyone say other the superb.
My E8200 is killer good for air/water, I can send it you to try on the cascade, just don't burn it though :D

Can you try same settings with 6 Multi for max fsb? You have Pm ;)

---

Thank , yes the E83 is impressive !!

Yes same setting with 6 multi :)

Quote:

---

Originally Posted by subaruwrc

Great bunch of WR's. Congrats.
Did u tested that E8200 on air?

---

i have test the E82 under commando , but not with the TP45 HP yet :)

Quote:

---

Originally Posted by Gautam

:clap:

Chip did arrive, it is looking quite good. ;)

---

:D great !!

Quote:

---

Originally Posted by NormanABates

@boblemagnifique,
hats off to you, fantastic result.

---

Many Thank , good combo (cpus/mobo/memory) :)

Quote:

---

Originally Posted by Eppikk

Damn Bob! I have a Q9450 and can only reach 479 FSB on AIR!! (P5E3 Prem)

Awsome results, was that Q9450 on Cascade?

---

Yes i don't test the fsb on air but the Q9450 is stable at 3.7ghz at 1.31v on air (C0 is good but rare) , i have sold since 2 week.

Quote:

---

Originally Posted by TheKarmakazi

Very Nice!!!:clap::clap::clap:

My biostar tpower I45 is on the way, I hope to join you soon :D:yepp:

---

Yes of Course , i wait your result !!

Quote:

---

Originally Posted by CtrlAltDel

I also have TP45 with Q9450 on it. Since im a noob overclocker, I need suggestion from others.
My sys :

TP45 + Q9450
2x1 Gb Kit Adata Vitesta 1066++
500Gb WD
HIS X1650 IceQ
Point Of View Black Diamond 550W
Asus Triton 79 Air Cooling

Can only hit 441 FSB with 1:1 DRAM config. Should I change to some water cooling to get higher FSB? What do think guys?
Should I change to better graphic card?
Some pics..
http://i346.photobucket.com/albums/p...starTP45HP.jpg

BIOS setting :
All AUTO except :
Ratio CMOS setting : x8
Intel Speedstep Technology : Disabled
CPU Freq Setting : 445

Need help and advise.... :shrug:

---

Please a check my setting in the first post :)

With the Xeon X3360 , i can screen at 500mhz of fsb on air and 520mhz on caskade mais i don't boot up at 445mhz , i need up the fsb with Setfsb under windows ;)

Amazing work yet again m8 :D

OK I'll try it. Anyway, I see on your cpuz, the procie stepping model and revision different from mine.
On your cpuz, it appears "ES", stepping 6, and revision C0. Mine was stepping 7, revision C1 without "ES".
Can you explain me what is the different between your procie and mine?
You mean using SETFSB and change the FSB via Windows?
Pardon me for my bad english :(

Quote:

---

Originally Posted by CtrlAltDel

OK I'll try it. Anyway, I see on your cpuz, the procie stepping model and revision different from mine.
On your cpuz, it appears "ES", stepping 6, and revision C0. Mine was stepping 7, revision C1 without "ES".
Can you explain me what is the different between your procie and mine?
You mean using SETFSB and change the FSB via Windows?
Pardon me for my bad english :(

---

ES means Engineering Sample, the cpu's intel gives out to reviewers and benchers before a chip is offcially released.

C1 Stepping is newer than C0, im not sure if C1's clock better or not though. Thats a question for someone else.

Congrats , great results :) , what is the max for v.core in Bios ? or its the board v. moded ?

Quote:

---

Originally Posted by Nosfer@tu

Amazing work yet again m8 :D

---

Thank :)

Quote:

---

Originally Posted by chispy

Congrats , great results :) , what is the max for v.core in Bios ? or its the board v. moded ?

---

+ 0.7875v of Vid (but with the QX , you choose the VID 1.1v at 1.6v) :)
The board isn't vmod for the moment , full stock !!! :)

Today i test my Q9550 C1 (ES) under Caskade !!! :) , New WR for the Q9550's , i see 552mhz but the valid is corromput !!! -> On Air : 521mhz easy :)

http://valid.x86-secret.com/cache/screenshot/394981.png

http://valid.x86-secret.com/show_oc.php?id=394981

Congrats Boble...

nice bob

again, amazing result man.

geez, Biobio is really showing some fsb there.

some nice screenies from you again bob :toast: that E8300 rockz - looks like biostar is fun for everybody at the moment :hehe:

:clap:

Are you going to take all the WR's ? :shocked:

I have a very nice E8200 which I can get to near 4.5gig on air, it benches stable on 4.4-4.45gig and only needs 1.515V to get there, wonder what that baby could do on cascade!

Quote:

---

Originally Posted by Tatty_One

I have a very nice E8200 which I can get to near 4.5gig on air, it benches stable on 4.4-4.45gig and only needs 1.515V to get there, wonder what that baby could do on cascade!

---

Kingpin also had a nice E8200 ... 1.6Vcore @ 4600MHz 3D 01 benchable ... :eek:

Congratulations boble ! :up:
You know what I'm waiting from you now uh ? ... hehe, *cough cough* Q9650WR *cough cough* :D ;)

Keep pushing it man ! :up:

What else ? :rolleyes:

French state of the art ;)

nice :up:

Now can you please test max FSB :ROTF::rofl: