MIPs RAM Freezer 4 Issues

Printable View

Show 100 post(s) from this thread on one page

07-31-2008, 08:07 AM
skinnee

Quote:

Originally Posted by RealRedRaider

MAN.......... These puppies are nice.....

Getting a MIPS Freezer.......

Stalling FTW!
07-31-2008, 08:20 AM
DarthBeavis

Quote:

Originally Posted by leo_bsb

When you say "no cooling" does it has a regular RAM heatsink with no air flow, bare dimms with no air flow or good heatsinks with airflow?
Did the temp change improve its overclock?

When you talk about buffered ram we may need WC.
But it doesn't change the design of the MIPS. I know somebody can do a better designed RAM block.

I am comparing to both no cooling an minor active cooling with OCZ cooler. Dims not bare. I did not OC the ram but as I said the temp delta is significant
07-31-2008, 02:14 PM
jonny_ftm

Just be careful. I also ordered the MIPS RAM Freezer 4, but...
With Nehalem triple channel, I don't see how it could fit on the upcoming 6 slots DDR3 boards
07-31-2008, 02:17 PM
Zaskar

Quote:

Originally Posted by jonny_ftm

Just be careful. I also ordered the MIPS RAM Freezer 4, but...
With Nehalem triple channel, I don't see how it could fit on the upcoming 6 slots DDR3 boards

Its not, unless you get a board like the basic Intel display one that only has 3-4 memory slots.

Their going to have to make a new design.
07-31-2008, 02:45 PM
tw33ter

http://www.performance-pcs.com/catal...oducts_id=3748
http://www.performance-pcs.com/catal...-30-v06_03.jpg
What about these? I know they're aluminum, but does the water even come in contact with it? With those, the water actually flows on the sides, through the "hydropaks", not just over the top...
07-31-2008, 02:51 PM
jonny_ftm

I can't imagine your flow with 3 of these for a triple channel Nehalem board. I hate those PVC tubes at the top, and also they are aluminium. Otherwise, they look universal indeed
07-31-2008, 03:23 PM
Zaskar

You could always get a Mips ramfreezer 2 or 3 if you want to use more then 1, but its less ideal then them making a newer one for the new boards.
07-31-2008, 07:23 PM
Eddie3dfx

aqua ramplex.. I should have a review up by next week.
Was using a tiny ass 5-6mm push fit barb, but then get the g1/8/1/4 coverter from bitspower which is 8mm and then into a danger den 1/2" fatboy :)
You can fit 3 memory modules on one block.
If you want copper, mips also sells the double mips freezer that cools 2 ram modules.

http://young-modders.de/Reviews/Heranke/Ramplex/4a.jpg

http://young-modders.de/Reviews/Heranke/Ramplex/2.jpg

Show 100 post(s) from this thread on one page