Printable View
I don't think I can say much else :D that chip is friggin great :up: ... I requested to play with this for single GPU benches but being that I don't have DDR2 anymore :rolleyes: so I will have to do some weeding ou tand testing of DDR2 again... had some amazing early G.Skill 6400HZ 9some of the early stuff:up:Quote:
Originally Posted by 4Qman
very nice:up: im going to pick this board up over the tpower. is there really any difference then the solid caps on the board?
very nice :D
fsb monster
GPU1 Type : ATI Radeon HD 4800 Series
GPU2 Type : ATI Radeon HD 4800 Series
:D :D :D :D
Nice thread!
Board is a monster, and this E8400 my brother got was clocking like crazy. Only got to test it for a couple hours on air but it was doing 533x8 (4.26ghz) 1.25V w/ Tuniq orthos stable for a few min, 3dmark05 flawless...
3DMark05 23K+ 4.0ghz 4GB 1000mhz 5-5-5-15 w/ a stock 9800GTX. I'm very impressed!
1.84v vcore under Cascade (-103°)
http://valid.x86-secret.com/show_oc.php?id=386755
http://valid.x86-secret.com/ccpuz.ph...6755&nocache=1
Where are you setting TRD? I'm not seeing the PL option in the bios... Booting at 500mhz+ FSB the board always sets TRD 10. Changing it to 9 is fine but any lower and I insta BSOD. With all the boards I own I have never been able to adjust the PL more than -1 without instantly locking up.
Do you have some new bios? I want to test this one today but there is only an old bios on the Biostar HP :(
Quote:
Originally Posted by DonBanana
http://download.biostar.com.tw/upload/Bios/P45BA624.BST
The US site only has the original bios. The Taiwan site has the newest bios, P45BA624.BST. Right click and save as is (link above.)
many thanks. Will try this out once board arrives :)Quote:
Originally Posted by Hutch
Thanks alot :)
bios is down :( I think I need another bios, my E6850 stuck at 545FSB and my E8400 currently under dice with not even 475 stable :eek: is the latest bios from their website so bad or am I only unlucky with my board?
Try less voltage.
+0.1 or +0.5V nb or +0.1-0.4V vfsb does not really make a difference. I don't need to push nb with much voltz to have the same boot errors over and over again. really gets me confused this time ^^
depending onthe bios you are on (if older ones like 618) you will HAVE to have your VTT higher by 0.04v than NB volts or you will be very unstable
also experiement with your RAM presets as different RAM yields different results
use auto settings on RAM first and then try set values
one things seems to be a bit different: I don't have "FSB Compensation: Enabled" in my bios options? is it missing in P45BA710.BST maybe?
hey Pt1t wanna drop by and show me your secrets? :D
Quote:
Originally Posted by SoF
It's down because they released a new bios.
http://download.biostar.com.tw/upload/Bios/P45BA710.BST
I'll test the bios in a couple hours when I head to my parents house to test the new D9JKH sticks that I got a month or two ago.
already tested the new one and it works fine :up:
Awesome!
Biostar P45´s rock!
The new bios allows manual PL setting. They also added a ton of new ram sub-timings to be set manually. The only problem is that you cannot set just some timings manual and some auto.
Im thinking to get myself that mobo :D.
im gonna i think its just as good as the tpower.