E8500 5.9G 3D Benchable with Biostar TP45 HP

Printable View

Show 100 post(s) from this thread on one page

06-28-2008, 09:04 AM
NewBeetle

Thank you all !!! :toast:

Quote:

Originally Posted by k|ngp|n

Very nice 5.9g.:up:

This system with the X2's would be blazing fast

Thank you so much, k|ngp|n-san. :)
I tried the X2's but it didn't work... :(
It seems this mobo has PCI-E compatiblity problems in current BIOS.
I expect new 4870 CrossFire system. :D

Quote:

Originally Posted by Oliver

Sweet work Mitsuaki Tanaka-san...

The biostar p45 boards just keep pushing it...

Will have a eye on u regarding further updates...

Keep pushing it...

Thank you always, Oliver-san.
Yes, I will keep pushing it. :D

Quote:

Originally Posted by youngpro

great newbeetle! this motherboard is so impressive, it seems to be pushing what we percieve as good benchable fsb out the window

Thank you, youngpro-san. :)
Your Biostar Tpower P45 is very amazing! :eek:
Congrats your FSB WR !!! :clap:

Quote:

Originally Posted by M3kk

Yep, very very nice :D.
Did you try max pi 1M, Cpu-z Valid and 2k1? :D

1M time is as fast as ASUS P965 mobos. :up:
But 8M is bit slower by my poor tweak... :shakes:

modPI 1M : 7.718s @6032.9MHz (FSB635.0MHz x 9.5)
http://homepage2.nifty.com/NewBeetle...x635=7s718.png

modPI 8M : 1m47.687s @5890.0MHz (FSB620.0MHz x 9.5)
http://homepage2.nifty.com/NewBeetle/Bio_8M_01m47s.png

CPU-Z Validation : 6128.14MHz
http://homepage2.nifty.com/NewBeetle...UZ_6128MHz.png

Quote:

Originally Posted by Kean

Nice clocks!
I would to see SPI1M (or 32M :) ) with this clocks.
What about Performance Level?
You pushed it 1:1 so PL probably was high?

Yes,Performance Level is very high. :D
It's "9".

Quote:

Originally Posted by gprhellas

BRAVO Tanaka-san. Very nice. :toast:

Thank you, M8. ;)
I think that this P45 mobo is more suitable for 3D bench than pi bench. :rolleyes:

DEWA DEWA
NewBeetle
06-28-2008, 09:08 AM
AndreYang

Team Japan again.:up: Nice job for great clock 3D benching.
06-28-2008, 09:14 AM
SeLecT

Very nice job!

What Fsb did you reched before modding?
06-28-2008, 11:47 AM
kiwi

Hi

What TRD are you running @ 620 & 635? vmch = 1.5V?
06-28-2008, 12:17 PM
sobih25

awesome bench with biostar p45 NewBeetle-san! :clap:
06-28-2008, 01:00 PM
Pedro Rocha

Just amazing, congrats Newbeetle-San :clap::clap::clap:
06-28-2008, 02:42 PM
Brandybuck

Great job NewBeetle :up: 5.9ghz benchable E8500:clap:
06-28-2008, 03:18 PM
NewBeetle

Thank you, sobih25-san and brandybuck-san. :)

Quote:

Originally Posted by AndreYang

Team Japan again.:up: Nice job for great clock 3D benching.

Thank you so much, AndreYang-san. :)
This is just CPU test.
I wonder I will catch up with your great score. :D

Quote:

Originally Posted by SeLecT

Very nice job!

What Fsb did you reched before modding?

CPU-Z : 640MHz
SPi 1M : 630MHz

Quote:

Originally Posted by kiwi

Hi

What TRD are you running @ 620 & 635? vmch = 1.5V?

MemSet setting : 4-4-4-4-10 / 4-26-9-11-11-4-8-6-4 / 2600T 2T
BIOS shows vmch : 1.440V (+0.400V)

Quote:

Originally Posted by Pedro Rocha

Just amazing, congrats Newbeetle-San :clap::clap::clap:

Thank you so much, Pedro Rocha-san. :)
Next I will try another GPU systems. ;)

DEWA DEWA
NewBeetle
06-28-2008, 04:06 PM
runmc

Newbeetle-San -

You are a true "Champion" :D Congrats on the outstanding fsb :clap:
06-28-2008, 11:22 PM
George_o/c

Congrats New Beetle-san :clap: Not only for the 5.9GHz 3D run which btw is just :eek2: :shocked: :eek:, but also for the great fsb you achieved and you SPi 1M run, just great ! :up:

Continue the good work, patiently awaiting your updates :)
06-29-2008, 02:00 AM
hey

nice start Newbeetle-san, too bad you had problems with X2's, you just missed WR's :). wolfdale+p45 will certainly be next benching platform :D
06-29-2008, 05:12 AM
LardArse

Very nice NB san... the PWM is surprising too! :up:
06-29-2008, 05:27 AM
Achill3uS

omg what a chip & mobo you have NewBeetle-san, congrats for the amazing results :up:
cant wait for the first 4870 CF runs with 5.9G cpu :lol:
06-29-2008, 05:36 AM
Pt1t

Very nice Results on that cheap Motherbaord !

but why did you do vcore mod ? There is no OPV like Tpower I45, you can do +2v under windows without , and use the biostar software to change vcore by 0.01v under windows. :D

http://www.xtremesystems.org/forums/...82#post3100882
06-29-2008, 06:50 AM
gandalfone

Congratz, very nice 3d frequency:clap:

I am sorry for high PL because I love spi32m
06-29-2008, 07:18 AM
hiwa

very nice cpu u have newbeetle -san and really nice Spi 1m time and 3dmark scors :up:
06-30-2008, 12:22 AM
NewBeetle

Thank you, runmc-san, gandalfone-san, hiwa-san! :toast:

Quote:

Originally Posted by George_o/c

Congrats New Beetle-san :clap: Not only for the 5.9GHz 3D run which btw is just :eek2: :shocked: :eek:, but also for the great fsb you achieved and you SPi 1M run, just great ! :up:

Continue the good work, patiently awaiting your updates :)

Thank you, George_o/c-san. :)

Yesterday I tried another GPU system.
But MAXFSB and 3DMARK05 is very very slightly update. :p: :D

MAX FSB : 692.07MHz
http://homepage2.nifty.com/NewBeetle...PUZ_692MHz.png

3DMARK05 : 36376 CPU/GPU/Mem/PCI-E : 5901MHz/900MHz/1100MHz/100MHz
M/B:BIOSTAR TP45-HPVer.5.0 vmod
CPU:Core2 Duo E8500 Q813A227
CPU cooling:MaxxNeo + LN2 / Temp:-135C
Chipset Cooling:Tara-chan 1st + LN2 / Temp:-50C
Mem:Team PC2-8500 C4 1GB x2 / 4-4-4-10
VGA:MSI RADEON HD3870X2(single)
VGA Cooling:stock
HDD:Western Digital WD360ADFD
PSU:SilverStone OP1200

Quote:

Originally Posted by hey

nice start Newbeetle-san, too bad you had problems with X2's, you just missed WR's :). wolfdale+p45 will certainly be next benching platform :D

Thank you always, hey-san. :)

Next I will challenge 05WR with new wolfdale + P45 system. :D :up:

Quote:

Originally Posted by LardArse

Very nice NB san... the PWM is surprising too! :up:

Thank you so much, shamino-san. :)

I hope new FOXCONN P45 board is more surprising! :up:

Quote:

Originally Posted by Achill3uS

omg what a chip & mobo you have NewBeetle-san, congrats for the amazing results :up:
cant wait for the first 4870 CF runs with 5.9G cpu :lol:

Thank you always, Achill3uS-san. :)

First lot of 4870 were sold out in Japan. :eek:
I could not buy it.... :(
Then I decided to change only P45 mobo but not to change GPUs.... :p: :D

Quote:

Originally Posted by Pt1t

Very nice Results on that cheap Motherbaord !

but why did you do vcore mod ? There is no OPV like Tpower I45, you can do +2v under windows without , and use the biostar software to change vcore by 0.01v under windows. :D

http://www.xtremesystems.org/forums/...82#post3100882

Thank you for your information, Pt1t-san. ;)
I decided to buy this Biostar board when I saw your fantastic results. :up:

But my Bio board cannot work this vcore tweaker. :confused:
And I just love vcore mod very much. :D

DEWA DEWA
NewBeetle
06-30-2008, 02:42 AM
over@locker886

Very nice start my friend with P45 system! :up:
06-30-2008, 05:33 AM
dinos22

wow i didn't see this thread

amazing
and you also say you were running PL9
that's very nice ...youngpro and i have been stuck with PL10 past 600 probably because of CAS5 clocks

i'll try some CAS4 clocks and some better cooling on NB

wonderful CPU as well :up:

one question....your 8M there is a little slow....have you tried to tweak it some more....it should be in low 1m 4xs :up:...i know that you have a 1m 42s time with P5B DLX :)
06-30-2008, 06:09 AM
nachthymnen

Fantastic scores as always NB-san:clap:
Now you need two 3870X2:D
06-30-2008, 06:38 AM
AndreYang

Quote:

Originally Posted by NewBeetle

First lot of 4870 were sold out in Japan. :eek:
I could not buy it.... :(
Then I decided to change only P45 mobo but not to change GPUs.... :p: :D

I can send you more 4870s if you want.:D I don't know why I received a lot of 4870s when I am in Taiwan now.:ROTF:
06-30-2008, 07:59 AM
NewBeetle

Quote:

Originally Posted by over@locker886

Very nice start my friend with P45 system! :up:

Thank you always M8!
Next I will try more big run. :D

Quote:

Originally Posted by dinos22

wow i didn't see this thread

amazing
and you also say you were running PL9
that's very nice ...youngpro and i have been stuck with PL10 past 600 probably because of CAS5 clocks

i'll try some CAS4 clocks and some better cooling on NB

wonderful CPU as well :up:

one question....your 8M there is a little slow....have you tried to tweak it some more....it should be in low 1m 4xs :up:...i know that you have a 1m 42s time with P5B DLX :)

Thank you always, dinos22-san. :)
My 8M run is very slow because I have no special tweaks. :D
I hear Biostar P45 mobo can run faster with Strap tweaks.
Next I will try it. :up:

Quote:

Originally Posted by nachthymnen

Fantastic scores as always NB-san:clap:
Now you need two 3870X2:D

I have got a new P45 mobo today.
I hope it will work well with two 3870X2 CFX system. :D

Quote:

Originally Posted by AndreYang

I can send you more 4870s if you want.:D I don't know why I received a lot of 4870s when I am in Taiwan now.:ROTF:

Thank you so much for your kindness, AndreYang-san. :)
This weekend I will be able to get two 4870s.
But I may not buy them if I can run 3870X2s CFX system with new P45 motherboard. :D

DEWA DEWA
NewBeetle
06-30-2008, 08:28 AM
TheKarmakazi

very nice benching as always newbeetle-san! cant wait to see your 4870's in CF!! Good luck on your next runs!
06-30-2008, 08:34 AM
SF3D

Impressive work from you Mitsuaki-san! :D

I'm waiting your 4870 CF runs :up:
06-30-2008, 04:09 PM
dinos22

Quote:

Originally Posted by NewBeetle

Thank you always, dinos22-san. :)
My 8M run is very slow because I have no special tweaks. :D
I hear Biostar P45 mobo can run faster with Strap tweaks.
Next I will try it. :up:

oh i see...that explains things better :up:

if you don't mind i would like to suggest that you try to boot at 600MHz FSB instead of 570
i found that when i boot at 590(haven't tried 570) my superpi is VERY slow...........but when i boot at 600 it's VERY fast :up:

strange but it works heh :)

maybe you will be the first man to go below 1m 40s :cool:
that CPU is awesome...... 5.9Ghz with 1.85v is really special :up:....special CPU and special OCer is pure nerd sex on the beach :D

Show 100 post(s) from this thread on one page