looking good
Printable View
looking good
looking better man Can't wait to see it finished!
Hi all
Comming a small update:
Small screws i will use to mount back panel
http://i287.photobucket.com/albums/l...997800x600.jpg
http://i287.photobucket.com/albums/l...998800x600.jpg
http://i287.photobucket.com/albums/l...8800x600-1.jpg
Got bottom compartement back panel, looks nice and fit perfectly.
Little drilling and tapping.
http://i287.photobucket.com/albums/l...000800x600.jpg
http://i287.photobucket.com/albums/l...001800x600.jpg
http://i287.photobucket.com/albums/l...002800x600.jpg
And that is how it looks like when is mount fits perfectly
Back
http://i287.photobucket.com/albums/l...006800x600.jpg
Inside
http://i287.photobucket.com/albums/l...011800x600.jpg
Close up for me look cool.
http://i287.photobucket.com/albums/l...013800x600.jpg
And this is jus a preview where PSU and HDD fans will live.
http://i287.photobucket.com/albums/l...019800x600.jpg
that is it for today more soon when new parts will commin, hope monday.
I dont like horitontal cases but your project is looking good.
Keep going ;)
With a good ventilation should be no problem.
i think some cases have a problem with rad and fan placing coz if u want to have a low water temps should never push out air from inside case just push in, allways u have colder air outside case than inside.
So in my opinion is better this way and have a good fans to take a warm air suck outside.
Looking good so far, will be interested to see how this comes along.
PS where abouts in Surrey are you ?
Horley near Gattwick
nice. i like updates...
(2 rd30s could fit in there nicely, hehehe)
Hi update again today a nice parcel has arrived from Performance PC and i can say im happy coz i can start doing my case again.
So another smart tool will help me doing all the sleeving.
http://i287.photobucket.com/albums/l...097800x600.jpg
Feser 1/2'' tube
http://i287.photobucket.com/albums/l...080800x600.jpg
http://i287.photobucket.com/albums/l...079800x600.jpg
Silverstone vented slots
http://i287.photobucket.com/albums/l...065800x600.jpg
http://i287.photobucket.com/albums/l...066800x600.jpg
http://i287.photobucket.com/albums/l...064800x600.jpg
Bitspower, DangerDen, Koolance male-male
http://i287.photobucket.com/albums/l...050800x600.jpg
http://i287.photobucket.com/albums/l...058800x600.jpg
http://i287.photobucket.com/albums/l...071800x600.jpg
http://i287.photobucket.com/albums/l...088800x600.jpg
http://i287.photobucket.com/albums/l...084800x600.jpg
http://i287.photobucket.com/albums/l...087800x600.jpg
And This the way Danger Den fill port will be mounted
http://i287.photobucket.com/albums/l...096800x600.jpg
And this will be a home made 10 PCI mobo tray
http://i287.photobucket.com/albums/l...113800x600.jpg
Im still waiting for a back panel where 10 PCI motherboard will be mounted
Thask it for now
very nice project and pics :)
is that the danger den fillport acetal?
Yes is acetal, is really nice.
I hope that water coming out from radiator will not comes out through fill port some how.
So just under DD acetal T fitting will be a laing ultra pump going to EK Supreme and then back into radiator so it will be v. very short loop. so there will be no loose any of flow.
I just ordered Bitspower compression fittings they will go onto EK Supreme
This looks awesome on EK block
yes they do :DQuote:
Originally Posted by Matias23
Update again
So i have my back panel, and now i can conitnue my project
Some essential tools (priceless)
I decided to go with normal mobo tray insted of 10 PCI coz it looks better, but 10 PCI i would have 3 slots unused and empty space, so no more 10 pci mobo untill we can buy such motherboard
http://i287.photobucket.com/albums/l...121800x600.jpg
This where fans will be mounted so take warm air out.
http://i287.photobucket.com/albums/l...123800x600.jpg
And that how is this cut out
http://i287.photobucket.com/albums/l...162800x600.jpg
http://i287.photobucket.com/albums/l...161800x600.jpg
http://i287.photobucket.com/albums/l...160800x600.jpg
With fans, for me looks nice
http://i287.photobucket.com/albums/l...125800x600.jpg
http://i287.photobucket.com/albums/l...129800x600.jpg
http://i287.photobucket.com/albums/l...131800x600.jpg
http://i287.photobucket.com/albums/l...127800x600.jpg
http://i287.photobucket.com/albums/l...133800x600.jpg
http://i287.photobucket.com/albums/l...135800x600.jpg
Now its time for mobo tray
http://i287.photobucket.com/albums/l...168800x600.jpg
http://i287.photobucket.com/albums/l...159800x600.jpg
http://i287.photobucket.com/albums/l...150800x600.jpg
This is how is mounted
http://i287.photobucket.com/albums/l...151800x600.jpg
http://i287.photobucket.com/albums/l...145800x600.jpg
http://i287.photobucket.com/albums/l...155800x600.jpg
http://i287.photobucket.com/albums/l...176800x600.jpg
HDD cooling Bays installed
http://i287.photobucket.com/albums/l...145800x600.jpg
http://i287.photobucket.com/albums/l...177800x600.jpg
Tomorrow i will cut out holes for PSU and fans in bottom compartement.
More update soon
Very nice looking, you could begin to rival Virulants build with this if the quality continues.
question, why did you put outside those filters, from the fan orientation (exhausting from in to outside), so filters should be inside if ever...
just use some grill out side to minimize air restriction...
Fan filters are just for now after when this all will be powdercoat i will put normal fan grills to cover holes.
Looks really awsome and I WANT MORE PICS!! Hurry up building ; )
Be patient
Im trying the best I can but it looks so nice :D
Hi
This is how it looks bottom panel with cut out holes for HDD ventilation.
http://i287.photobucket.com/albums/l...183800x600.jpg
And this is how i can unscrue a HDD cage from main chassis to get drives out.
http://i287.photobucket.com/albums/l...184800x600.jpg
http://i287.photobucket.com/albums/l...185800x600.jpg
http://i287.photobucket.com/albums/l...191800x600.jpg
There will be another hole for PSU, but waiting for Silverstone PA 1200w to coome so i can mesure and cut out this properly. I dont want to just cut this out not beeing sure where exactly should mount this.
Mounting a mobo tray there was a gep between back panel and main frame like this
http://i287.photobucket.com/albums/l...195800x600.jpg
So i had to put another pice of aluminium to fill this gap like this
http://i287.photobucket.com/albums/l...197800x600.jpg
So after its done look like this not bad i think
http://i287.photobucket.com/albums/l...200800x600.jpg
Little different view from back with fan grils
http://i287.photobucket.com/albums/l...213800x600.jpg
http://i287.photobucket.com/albums/l...208800x600.jpg
http://i287.photobucket.com/albums/l...193800x600.jpg
http://i287.photobucket.com/albums/l...192800x600.jpg
That is it for now more soon
Thanks
looks great man, very creative and functional :up:
Keeps Getting better!!