I dug up my very first case mod and dusted it off and put it back in service. Here are a couple of pics. It was also the very first time I ever used a dremel. :D Gotta slap some cooling on that NB.
Printable View
I dug up my very first case mod and dusted it off and put it back in service. Here are a couple of pics. It was also the very first time I ever used a dremel. :D Gotta slap some cooling on that NB.
Another with the lights down low.
Luminol:
modded 120mm top blowhole
modded side window with 120mm side intake (used 1/8 inch Lexan with carpet tape and rivets)
modded front 92mm intake using PVC intake tunnel
rewired and relocated the power and reset switches (using ITW Switches Series 57 Mini Vandal Resistant Switches)
rewired and relocated power and HD LEDs (power LED is the modded Lexan AMD symbol)
Sunbeam Rheobus
3 * 12 inch blue CCFL (rewired so all 3 work off of the same rocker switch)
1 * 6 inch UV CCFL
painted with textured car trunk paint and then a flat black over coat
stealthed CDRW (but not working properly.. too tight because of the rheobus)
PSU sleeving and cable-fu..
http://members.cox.net/4nzics/Projec...pwithlight.JPG
http://members.cox.net/4nzics/Projec...frontflash.JPG
http://members.cox.net/4nzics/Projec...twithlight.JPG
http://members.cox.net/4nzics/Projec...ontnolight.JPG
http://members.cox.net/4nzics/Projec...ewithlight.JPG
http://members.cox.net/4nzics/Projec.../3cathodes.JPG
the fan grille is painted with yellow UV reactive paint:
http://members.cox.net/4nzics/Projec...ol/sideUV2.JPG
Here's one of my current projects...
Lian Li PC-76
Abit IC7-Max3
P4-2.4C @ 3.2ghz (stock intel cooler for now)
Crap TNT2 video
I originally bought this case planning on running a water cooled dually in it... but never got around to it so I threw in an aircooled P4. For now it's a dedicated folding@home machine.
... and also the back shot
Quick Update on the state of my rig...
http://users.over-clock.com/gallery/...x/DSC00220.jpg
http://users.over-clock.com/gallery/...x/DSC00201.jpg
And the animated slideshow edition...!!
For full galleries see link in mi sig!
Here is mine...
And with the lights on...
waiting on a prommie for the underside :-)
2
my raddy fans ontop.
my custom window applique and heatsink mods, also got a small heatsink with 40mm fan on sb.
already posted else where but here it goes
again
Ok, here it is...Quote:
Originally posted by IFMU
Now lets see some works of ART!~!
Another great shot...
This is my lan/gaming computer, it always works... :D
Thanks, It may look a little messy when I got the side off, but when I put the side panel on it looks like this....Quote:
Originally posted by Thaddy
Nice wiring job Csoft:)
This is how mine looks now, I might have to change the board :bang: so I didn't put to much work into it.
There it is hard locked just trying to get it to run 220FSB (board does at least 236Mhz in past)
http://s88708673.onlinehome.us/pics/...s/IMAG0001.JPG
http://s88708673.onlinehome.us/pics/...s/IMAG0002.JPG
The shroud thingy is the best part out of an HP. I need to paint it and the fan. Either way it helps keep the video card ram cooler. Notice the SB cooling :D
http://s88708673.onlinehome.us/pics/...s/IMAG0004.JPG
Floppy Drive pointing in :D SATA driver is in it bc its the only disk I ever use. I'm thinking about putting the floppy behind the motherboard tray.
http://s88708673.onlinehome.us/pics/...s/IMAG0007.JPG
7K RPM keeping the mosfet heatsinks cool, that hard drive hooked to that yellow (glow in the dark) round cable is temporary. The tornado fan in the back is pointing in to cool the top of the video card. Havn't put ram sinks on yet.
http://s88708673.onlinehome.us/pics/...s/IMAG0011.JPG
here is my toy
Heres a few pics of my rig, right now it isnt much. (My waterblock just got a leak, thats why I got the stockcooler on) ;)
http://finseth.dk/mixed/DSC00859.jpg
http://finseth.dk/mixed/DSC00862.jpg
http://finseth.dk/mixed/DSC00860.jpg
http://finseth.dk/mixed/DSC00861.jpg
It all still need a bit of work, but just wanted to post em anyway, cause Im lazy, and it will prolly take some time for me the get my watercooling back together.. :rolleyes:
well heres my mess. i still need to get that reobus in the drive bay so i can stuff all of those wires behind the drive cages, but im to lazy and am too busy with other stuff. a lot of ricers have those under glow under their cars, so i thought i through a 12" cathode under my case. i also have one right above my keyboard so i can see the keyboard at night. that one light lights up my entire room! i like it :D
heres one from another angle to better show my l33t cooling system. i have some cheapo water block with a alu 80mm fan blowing on it, my nb, and (sorta) ram. that alone drops my cpu temp around 5-7c while the cheapo rad (it has the multi-colored led fan on it) doesnt do that much in a push-pull. i also took the cover off my psu and stuck a alu 120mm fan on it at low speed and it dropped the db level considerably since i can turn off the fans in the psu. someday im gonna cut a blow hole above the psu and stick the 120mm fan there to cool it off and clean it up.
enjoy