ASUS P5E64 WS Evolution - Tips, Tricks, Mods, BIOS, OCing & More...

:D Very nice pics Kabauterman - though mine looks a bit different now:p::

http://img144.imageshack.us/img144/1...n015va9.th.jpg

http://img144.imageshack.us/img144/6...n016zp6.th.jpg

NB waterblock has been shipped to me yesterday - hope to get the right one this time...........;)

:up:

cross fingazz for that YO! I feel we are going to get some more pics, and benches soon :P

:D New BIOS 0401 released ;) - download at official ASUS site !!!



:welcome:

PS. camouflage
Where did you get that ASUS REPAIR KIT ;)
Been looking all over the ASUS site and retailers and I cant find it anywhere :rofl:
Must be a legacy type kit. Bet it still worls on todays highly advanced technology just fine :ROTF:

Quote:

---

Originally Posted by ToyTen

thanks for those very nice pictures, and the comparo between 790i and Evo ;)
Can't wait till mine arrives...


Kabauterman, could you please try the spi32 but with 534x7.5 please? You should gain for sure: this is with GA-X38T-DQ6 rev 1.1 bios f7b http://pix.nofrag.com/2/7/2/d0f1beb3...b0effcbatt.jpg

---

I am sure I cant get FSB 535 on my QX ;)
don't have a Wolfdale CPU sorry :-)

@camo:

ohh new BIOS
hope it fixes the slow boot...

arff my mistake, ok then, nevermind, good continuation to you

i´m already with 0401 since thursday and did not see any changes but at least since yesterday not having stability problems like before.

monday will continue with more tests when the gskill hz arrive because with this ocz crap gold can´t past over 1340mhz :shrug:

the other problem that still remaining is the cpu temperature, instaled a noctua U12P and it´s impossible having 45º imediatly after turn on the pc and 51º on the cores in real temp, even at load the temps dont move.

regards

"retail"

id like to know what planet/world u guys get the mobo from..

that or im the one on another world/planet

Wait
I just have a quick question

Camouflage, I suppose you are planning to give this board a hard-core overclocking right? Because unlike others, I think the stock NB heatsink seems pretty good... I dont know, I might be wrong. Now if it could have been the size of the Maximus or Striker II boards, it would have been good enough dont you think?

And why did you put antartica over your power regulators? Thats a lot of cooling for them :P

Quote:

---

Originally Posted by slim142

Wait
I just have a quick question

Camouflage, I suppose you are planning to give this board a hard-core overclocking right? Because unlike others, I think the stock NB heatsink seems pretty good... I dont know, I might be wrong. Now if it could have been the size of the Maximus or Striker II boards, it would have been good enough dont you think?

And why did you put antartica over your power regulators? Thats a lot of cooling for them :P

---

:D I run a WC setup with a chiller - and I want to get the NB also under chilled water.

So I had to remove the whole heatsink ensemle to get a waterblock onto the NB...

The replacement parts for the mosfets may be a bit oversized - but looking nice & were the only ones I found so far in Europe to do the job.

BTW - I can't really believe the stock cooling should be fine - how much contact do You think will do a heatsink mounted with thermal compound looking like this:

http://img501.imageshack.us/img501/9...n006yk8.th.jpg

If You don't plan to cool the NB with water I think it's highly recommended to replace the stock thermal compound with AS5.


@supa-fly : :clap:You can get the repair kit only from special developers who have killed at least 10 ASUS boards......:rofl::ROTF:
:up:

Quote:

---

Originally Posted by camouflage

The replacement parts for the mosfets may be a bit oversized - but looking nice & were the only ones I found so far in Europe to do the job.

BTW - I can't really believe the stock cooling should be fine - how much contact do You think will do a heatsink mounted with thermal compound looking like this:

http://img501.imageshack.us/img501/9...n006yk8.th.jpg

If You don't plan to cool the NB with water I think it's highly recommended to replace the stock thermal compound with AS5.

:up:

---

hiho,
Those rads on mosfets are big that's a fact, not changing much to the mobo its look, important isn't it :p: as it improves the cooling...

For the replacement of the compound on other chips than cpu, isn't it safer to put 'ceramic' Arcticsilver compound ? it would be a drama to get a short circuit

nice pics kabauterman! :toast:
about the voltages showing much higher in windows with the asus tool than what you set in bios and what the real voltages are.
its a bug with the asus tool, it happens on several boards.
try another version of the tool, or better, stop using that crappy asus tool and use everest or some other REAL tool :P :D hehehe

btw, that extra power button and debug led card looks a bit flaky...
it looks like it will break if you push the power button too strong :D
is it stable or does it move around?

Quote:

---

Originally Posted by Maximusss2008

Para os Portugueses...
Isto assim nao m convense...mas vamos esperar para ver...lool

---

Inglês por favor ;)
muito agradecido :D

I think cooling looks very fine but it isn't much performant, NB gets realy hot.

I also plan to change the Cooling, camo, what Thermalright MOSFET Coolers do you choose.
For NB I will use Thermalright HR-05 IFX and on SB I use Coolink ChipChilla

Edit:

Saaya, the card isnt very stable but Its enoght to normal use

Quote:

---

Originally Posted by camouflage

:D I run a WC setup with a chiller - and I want to get the NB also under chilled water.

So I had to remove the whole heatsink ensemle to get a waterblock onto the NB...

The replacement parts for the mosfets may be a bit oversized - but looking nice & were the only ones I found so far in Europe to do the job.

BTW - I can't really believe the stock cooling should be fine - how much contact do You think will do a heatsink mounted with thermal compound looking like this:

If You don't plan to cool the NB with water I think it's highly recommended to replace the stock thermal compound with AS5.

---

Well, of course thats not going to cool it good enough, but you can always save money and time by just changing the thermal paste and cleaning the stock pipes. Same reason why I changed the thermal paste from my SIIE to MX-2 and changed that crappy paste :) , didnt really want to see the pipes I payed so much for around the house with no use, but since yours are a different story, then I think you did the right thing :up:

I just orderd this WS Evolution board. Does anybody have experiences with this board and 2x2 GB RAM since it seems that high density/capacity RAM really stresses the boards?
Another thing can you pull off the heatpipe system (for replacing the TIM) and put it back on without ruining the "pins/splits" (don't know what they are called) that fastens the heatpipe system?

Quote:

---

Originally Posted by Holmer

I just orderd this WS Evolution board. Does anybody have experiences with this board and 2x2 GB RAM since it seems that high density/capacity RAM really stresses the boards?
Another thing can you pull off the heatpipe system (for replacing the TIM) and put it back on without ruining the "pins/splits" (don't know what they are called) that fastens the heatpipe system?

---

Yesterday I removed the Heatpipe and change the thermal compound.
Pins work fine after changing...

@ ALL

I also test BIOS 0401 Yesterday, works realy nice!
Improved boot times and Debug LED shows right Codes ;)

Nice board my friend camou!

I hope you will reach some good scores with this!

ppl that already have the board with 45nm, does still display sticky temp of the cpu?

with mine is always 45º at idle and full, the temps of the cores in real temp change a little bit only when i raise the vcore up to 1,45v or more

:up:

Holmer, as i tried OCZ 1600EB 2x2 KIT - with 1:2 div (QX9770 cpu) 1 kit worked okay. But two kits - won't POST at all, no matter of vNB :(

Quote:

---

Originally Posted by pmp

Holmer, as i tried OCZ 1600EB 2x2 KIT - with 1:2 div (QX9770 cpu) 1 kit worked okay. But two kits - won't POST at all, no matter of vNB :(

---

a friend of mine has the same exact problem with the WS64 Pro version that is basicly the same as this one evo, but the diference is that he was using 4x1GB 1600 ocz platinum.

solution for know was sell one of the kits and in the future buy a 2x2gb kit

But WS64 Pro is X38 based one :)

yes but x48 is amost now as x38 renamed to :p:

but what matters is that something is not right when using 4 sticks :rolleyes:

Don't think his QX does 534FSB, at least mine topped at 470'ish level...

Nice looking board, why didn't you order straight from Eddie Camouflage... would have been way faster...

Quote:

---

Originally Posted by Kabauterman

I think cooling looks very fine but it isn't much performant, NB gets realy hot.

I also plan to change the Cooling, camo, what Thermalright MOSFET Coolers do you choose.For NB I will use Thermalright HR-05 IFX and on SB I use Coolink ChipChilla

Edit:

Saaya, the card isnt very stable but Its enoght to normal use

---

:D You can see it here:

http://img254.imageshack.us/img254/5...n004ex4.th.jpg


@Leeghoofd: :confused:WTF is EDDIE.......:confused:

Quote:

---

Originally Posted by Kabauterman

Yesterday I removed the Heatpipe and change the thermal compound.
Pins work fine after changing...

@ ALL

I also test BIOS 0401 Yesterday, works realy nice!
Improved boot times and Debug LED shows right Codes ;)

---

Quote:

---

Originally Posted by pmp

Holmer, as i tried OCZ 1600EB 2x2 KIT - with 1:2 div (QX9770 cpu) 1 kit worked okay. But two kits - won't POST at all, no matter of vNB :(

---

Thanks Kabauterman and pmp. I appreciate your answers. I will return with my experiences when I get my board (early next week).