Project: Cosmos S, first casemod "update"

Printable View

Show 100 post(s) from this thread on one page

06-30-2008, 04:17 AM
septim

updates?
06-30-2008, 05:31 AM
Fumle

Quote:

Originally Posted by twwen2

Nice work Fumle, especially good job on the sleeving! What tool did you use to remove the pins in the ATX and PCI-E connectors? I'm currently sleeving my HX620 and i can't get them out with the sunbeam tool:mad:.

The sunbeam tools er are SH**, i use an pin remover from AC Ryan, it fits perfectly but dont use much force, because it will break

Quote:

Originally Posted by septim

updates?

I belive i will get some work done this week, because i got some time from job from my new job as Server King
06-30-2008, 05:46 AM
twwen2

Quote:

Originally Posted by Fumle

The sunbeam tools er are SH**, i use an pin remover from AC Ryan, it fits perfectly but dont use much force, because it will break

Right. Off to find an ACRyan kit then:shakes:. Thanks for replying
06-30-2008, 06:05 AM
Pellepel

Quote:

Originally Posted by Fumle

The sunbeam tools er are SH**, i use an pin remover from AC Ryan, it fits perfectly but dont use much force, because it will break

Wow I really like what you did the PSU-Express cable. I managed to removed my PCI cable with the Sunbeam, but it took a very long time; and thats with only four cables. To think I was going to do it with my PSU cable was not welcoming. I really like the aestetic look to it, now that you metioned about the AC Ryan, I'm definitely put it on my list to do. Now *runs off to PPCs*.

BTW looking good on the project keep it up :up:.
07-02-2008, 12:24 AM
generalpetres

i <3 cosmos s case look so nice painted black and chrome rails along with a nice window nothing else will come close imo. now when you painted your case you get it powder coated or just use a spray can?
07-02-2008, 01:28 AM
Fumle

Quote:

Originally Posted by generalpetres

i <3 cosmos s case look so nice painted black and chrome rails along with a nice window nothing else will come close imo. now when you painted your case you get it powder coated or just use a spray can?

This one is done with spray can, jsut wanted to try it

I think out nice enough that i dont want to get it media blasted and powder coated
07-02-2008, 02:21 AM
generalpetres

did you sand the plastic panels then paint or sand, primer then paint over that?
07-03-2008, 02:43 AM
Fumle

Quote:

Originally Posted by generalpetres

did you sand the plastic panels then paint or sand, primer then paint over that?

I sanded alittle with some very fine wet sandpaper, single layer of primer og 2 layers of black, 1 layer clearcoat
08-07-2008, 12:59 PM
IcepiK

None of your pictures are showing up....imagehost down?
08-07-2008, 02:25 PM
Fumle

Quote:

Originally Posted by IcepiK

None of your pictures are showing up....imagehost down?

I forget to this year hosting fee :doh: :doh:

But it is fixed for now, but there is also going to be an update this weekend (i promise this time)
08-07-2008, 03:14 PM
mpower1001

Nice sleeving
08-16-2008, 01:26 PM
IcepiK

updates?
08-18-2008, 08:30 AM
mit78

hi

nothing new?
10-09-2008, 03:40 AM
Fumle

An very sad update:

I ran into alot problems while modding different things, while trying to do some fancy stuff with power button (I/O Panel) it broke and coolermaster does not any for sale yet, atleast what the CoolerMaster Shop told me

Also while polishing the sidebars at the front, one of the springs holding it where lost, and i also have to desambly the case for better asembly because the sides doesnt fit properly so the side keeps "popping" off the case, really ignoring

So now i stopping modding it and put it back in the box, maybe i will finish it in the future but who knows :)
10-09-2008, 04:03 AM
masxerofkartis

Quote:

Originally Posted by Fumle

An very sad update:

I ran into alot problems while modding different things, while trying to do some fancy stuff with power button (I/O Panel) it broke and coolermaster does not any for sale yet, atleast what the CoolerMaster Shop told me

Also while polishing the sidebars at the front, one of the springs holding it where lost, and i also have to desambly the case for better asembly because the sides doesnt fit properly so the side keeps "popping" off the case, really ignoring

So now i stopping modding it and put it back in the box, maybe i will finish it in the future but who knows :)

Well you could always email cm and a sk for a replacement part. Just make sure that the thing is within warranty ;)

Also about the sidepanel make sure there is no cable on the actual spring system from the outside where it touches the sidepanel.

(of course if that is not the window panel)

Also make sure you only have a cable on a line and not 1 piled up on another.

also try no to use the downer hole of the case for the psu cables use the upper one

Hope to see more of your mod
10-29-2008, 04:50 PM
IcepiK

dont give up....CM will send you a replacement part, they sent me a new side panel after I dented it trying to force it back on... (cables were in the way) It was all my fault but they replaced it anyway.
10-30-2008, 06:12 AM
pcaddict

looking great for now! :up:
11-01-2008, 04:22 PM
Fumle

Quote:

Originally Posted by IcepiK

dont give up....CM will send you a replacement part, they sent me a new side panel after I dented it trying to force it back on... (cables were in the way) It was all my fault but they replaced it anyway.

I have tried that and they told me that they dont got any for sale right now, but my girlfriend has left me after 7 years, so i dont really have this project on my mind for the time being

Show 100 post(s) from this thread on one page