Fuzion V2 base is not the same as V1

Printable View

Show 100 post(s) from this thread on one page

05-07-2008, 04:06 PM
[XC] NetburstXE

Quote:

Originally Posted by Snyxxx

How does an engineer chop a log in half?

Calculate where to cut the log to three decimal places.
Locate the cut with a tape measure.
Marks the cut with a piece of chalk.
Cuts with an axe.
:D

:rofl::rofl::rofl::rofl::rofl::rofl:
05-07-2008, 07:28 PM
Waterlogged

Quote:

Originally Posted by Martinm210

You forgot to mention the need to know:

Type of wood
Bark or no bark
Moisture content
Diameter
Carbon content of axe blade
Angle of axe blade

Then...just before the swing, the environmental folks would show up and shut me down as usual..

Darn endangered beetles or something I overlooked..:D

What migratory bird act?..:)

:rofl::ROTF: So true.:shakes:

In the case of where I live...the Common Tern. So far, it's resulted in a NFL football stadium being located in a suburb of the city the team is suppose to represent, a state college also being located in another suburb and recently, a "signature" bridge between the US and Canada being scraped for a "3rd place runner up" design.
05-07-2008, 08:24 PM
Big_Daddy

<sigh> heh. anybody want a never been used, and only dropped once v1 with pro mount? :)

Guess I'll be upgradeing before I even get it installed..
05-08-2008, 11:27 AM
Garrett

Quote:

Originally Posted by anubis_is_evil

nice review Martinm210....:up:

damm i just bought the fuzion v1 :( should i replace ? :p:

btw did you tested it with nozzle kit ?

thx

I bought the FuZion V1 2 weeks ago as well... lol
But what's the XSPC block?
I must've read over it or something... :confused:

PS great testing Martin, highly appreciated...again :up:
05-08-2008, 12:02 PM
GeorgeStorm

Garrett,
I tihnk they are meaning the XSPC X20 Delta block, :
http://coolercases.co.uk/acatalog/XSPC_CPU_Blocks.html
I am intending on getting this blocok as it is much cheaper than the fuzion, and also performs just as well, if not better,
I tihnk they are also releasing the edge, or something similar, which is meant to be better i think, although people think that it is very similar to the supreme, i tihnk........
Just me trying to help....
05-08-2008, 12:05 PM
Garrett

I think the XSPC Acrylic block is the one mentioned ;)
Here's why I think that: http://www.martinsliquidlab.com/XSPC...U-Preview.html
05-09-2008, 01:23 AM
Anemic

Sweet review! Gonna to be fun testing this block out!
05-11-2008, 05:39 AM
jagt

So... when are the results coming? :)
05-11-2008, 06:36 AM
ripken204

just wait, they will come :)
he's making sure that he takes his time so that we can get very accurate results.
05-11-2008, 07:38 AM
Martinm210

Quote:

Originally Posted by jagt

So... when are the results coming? :)

I'm only going to do this once, so do you want just the stock block or several nozzles included?

Pressure drop testing is all done.

I've got stock done and 4 of 5 mounts done with the 4.5mm nozzle. It takes a full day of bleeding between nozzle switching, so it takes time.

So far I don't have enough data to even recommend a nozzle and I was hoping to include that as part of the package.
05-11-2008, 09:13 AM
smee

Quote:

Originally Posted by Martinm210

It takes a full day of bleeding between nozzle switching, so it takes time.

Wait, you mean it takes you a whole day to bleed out the air bubbles?

It takes me about 10-15 minutes to switch out nozzles and get the air bubbles out....
I don't have to drain the loop either.

How do you do it?
05-11-2008, 09:25 AM
jagt

Yeah sorry, didn't mean to nag. I understand it's a very time consuming thing to do, and I believe we all greatly appreciate your throughout and accurate tests. Was just wondering if you had some kind of time estimate, as I'm greatly anticipating the results! :)
05-11-2008, 11:40 AM
Martinm210

Yeah, you must be running a reservoir. I'm still running a T-line and my D5, 90% is bled out in an hour, but it takes overnight to completely clear up.

I'll probably go ahead and just finish this with the stock and one nozzle run. After seeing the lack of performance with a 4.5mm nozzle, I don't expect to be able to measure anything worthwhile in the nozzles. All the gain for dual core with standard pumps appears to be in the washer which is integrated in V2 with an o-ring.

I should have something to share by mid week this week. I still have a bunch of pictures and webpage building to finish up first.
05-11-2008, 12:08 PM
smee

Quote:

Originally Posted by Martinm210

Yeah, you must be running a reservoir. I'm still running a T-line and my D5, 90% is bled out in an hour, but it takes overnight to completely clear up.

I'll probably go ahead and just finish this with the stock and one nozzle run. After seeing the lack of performance with a 4.5mm nozzle, I don't expect to be able to measure anything worthwhile in the nozzles. All the gain for dual core with standard pumps appears to be in the washer which is integrated in V2 with an o-ring.

I should have something to share by mid week this week. I still have a bunch of pictures and webpage building to finish up first.

ahhh, I see. I have my reservoir sitting above my tech bench, so all the air bubbles go there.
But usually I'll just have the block un-mounted and take the whole loop to my desk for a couple minutes and run the pump and get all the air bubbles out by moving everything around.

BTW, are you going to test the V2 bowed? Getting an EK O-ring?

Quote:

Originally Posted by RealRedRaider

Martinm210:

Are you going to update your flowrate spreadsheet with the v2 block w/Quad Plate? PLEASE.........

Stop being so pushy!! He's working too hard as it is.

HURRY UP AND UPDATE IT, PLEASE!!!!!!!!!!!!!!!!!!!!! :D:D:D:D

JK, jk, Martin. You are doing a fine job, take your time. :up:
05-11-2008, 02:59 PM
clock_ed

So many people are waiting patiently for these results, better take some shares out for D-tek and sell them after the whole of XS buys V2’s. lol
05-11-2008, 03:00 PM
Martinm210

Quote:

Originally Posted by RealRedRaider

Martinm210:

Are you going to update your flowrate spreadsheet with the v2 block w/Quad Plate? PLEASE.........

Sorry, they didn't send me the quad plate. You guys are on your own with that one, you can use a quad nozzle as a rough guess, but I have no idea how the whole plate relates.

I did test and I will update the estimator with the V2 and nozzle kit though. It's already done, I just have to make the trimmed down web version.
05-11-2008, 05:44 PM
Martinm210

Quote:

Originally Posted by RealRedRaider

Do you want one? Do you still have the block, or did it go back? I will buy both right now and put your address as the ship to if you PM me your address... You're welcome to keep them, I've already got mine from Gary @ Sidewinder...

:off: If Android ever gets off his a** and makes his block available for sale, I'm buying one and would love for you to test it.. (I just like it's looks) :off:

I don't have a quad, so the only thing I could test would be pressure drop.

I'm done with my draft review, just waint for a quick check and I'll post it in the next couple of days.

I'll get an estimator update done in the mean time.:D
05-11-2008, 06:08 PM
ripken204

well if RealRedRaider is so willing to buy a quad plate for you, im sure he will be willing enough to buy you a Q6600, they are cheap enough as it is. he could at least let you borrow his Q6600, lol.

anyways, why do we need a trimmed down web version?
trimmed down? shouldnt anyone using that term at XS be banned :p:
give us the full blown 1TB version of the results :)

thanks for your work so far
05-11-2008, 07:00 PM
Martinm210

Quote:

Originally Posted by ripken204

well if RealRedRaider is so willing to buy a quad plate for you, im sure he will be willing enough to buy you a Q6600, they are cheap enough as it is. he could at least let you borrow his Q6600, lol.

anyways, why do we need a trimmed down web version?
trimmed down? shouldnt anyone using that term at XS be banned :p:
give us the full blown 1TB version of the results :)

thanks for your work so far

I have to give you the full version. I was usually trimming off my plotting charts, links, and pictures so I could attach it in the sticky thread as an attachment (200K max). But it looks like I'm over the 200K limit regardless, so you get the full meal deal but only from my site. It's on my site now, but I havn't updated the other links and sticky threads yet.
05-11-2008, 07:06 PM
smee

Quote:

Originally Posted by Martinm210

I have to give you the full version. I was usually trimming off my plotting charts, links, and pictures so I could attach it in the sticky thread as an attachment (200K max). But it looks like I'm over the 200K limit regardless, so you get the full meal deal but only from my site. It's on my site now, but I havn't updated the other links and sticky threads yet.

Oh Sweet!!! *goes and downloads* :D

You are awesome Martin! :up:
05-11-2008, 07:07 PM
ripken204

sweet, im reading it now, thanks

Show 100 post(s) from this thread on one page