c2d E7200 under my cascade... (they seem to clock pretty well) :D

I thought is was 3MB x 1, could be wrong.

Wafer is "Lucky 777" glad it's still alive after almost 2V ;)

Quote:

---

Originally Posted by Hazaro

I thought is was 3MB x 1, could be wrong.

Wafer is "Lucky 777" glad it's still alive after almost 2V ;)

---

oooh yeah i didnt even notice LOL... cool...

anyways i was doing some clocking today.. NO LUCK my board went grazy.. im trying to figure out what the broblem is :mad::mad::mad:
maybe the cpu is cold bugged or something :( :(

EDIT: LOL i was too hasty to say that its the cpus fault... it wasnt, the board was swimming in water when i took the socket insulation off... i hope that i didnt kill it :shocked::shocked:

Quote:

---

Originally Posted by Solarfall

EDIT: LOL i was too hasty to say that its the cpus fault... it wasnt, the board was swimming in water when i took the socket insulation off... i hope that i didnt kill it :shocked::shocked:

---

if it died i can say than DFI sux, mine died today w/o any reason :ROTF:

It's not world record check ripping.org

Quote:

---

Originally Posted by s0lid

if it died i can say than DFI sux, mine died today w/o any reason :ROTF:

---

no worries it works again..

Quote:

---

Originally Posted by overcrash

It's not world record check ripping.org

---

lol yeah seems like im not even close...well atleast thats the HWbot record :D:D

ran some Wprime today...

wprime m32

http://i163.photobucket.com/albums/t...me32m15703.jpg

wprime m1024

http://i163.photobucket.com/albums/t...ime514531s.jpg

Quote:

---

Originally Posted by SIOUX

As CPU-Z says......2 x 3mb L2 :)


Great chip, and great benching :toast:

---

Sorry but it's only 1 x 3Mb L2.

CPUZ shows the total amount of L2 cache, as you can see in my CPUZ screenshot:

[IMG]http://img262.imageshack.us/img262/715/cpuzyr8.jpg[/IMG]

Quote:

---

Originally Posted by Solarfall

well compared to 8x00 line of cpus the super Pi times are slow.. thats cos there 7x00 cpus have only 3073 cache (the 8x00 cpus have 6144 cache ) ;););)

---

32M SuperPi times will make no difference >>> if they do it will not be more than 2-3 seconds

have a look at this quick test on Asus P5E3 DLX and E7300 i have

http://img88.imageshack.us/img88/572...z10m56spl3.png



with the setup you have and clocks there you should be able to break 9minute barrier :up: but it's only your first try so i am sure times will improve with more sessions :)

you are very lucky to get that FSB out of the CPU :up:

Very good chip end nice results for 32M

nice cpu's

Quote:

---

Originally Posted by dinos22

32M SuperPi times will make no difference >>> if they do it will not be more than 2-3 seconds

have a look at this quick test on Asus P5E3 DLX and E7300 i have

with the setup you have and clocks there you should be able to break 9minute barrier :up: but it's only your first try so i am sure times will improve with more sessions :)

you are very lucky to get that FSB out of the CPU :up:

---

well im getting some sweet ddr3 hardware next week so my scores should improve little bit..also i have to point out that i know absolutely nothing about windows tweaking and prolly thats why my scores sucked :D:D

Quote:

---

Originally Posted by MARCO74

Very good chip end nice results for 32M

---

thanks :up:

Quote:

---

Originally Posted by rgkpt

nice cpu's

---

yeah i know.. these are very fun to overclock :D:D:D

Quote:

---

Originally Posted by Solarfall

yeah i know.. these are very fun to overclock :D:D:D

---

LOL :D

after getting a dog e8400, decided to roll the dice on an e7200 - slapped it in 20 minutes ago and so far so good. too bad its already 85F and climbing in my office, but early tomorrow morning it should be cool.

http://img394.imageshack.us/img394/4967/4300wd8.jpg

nice work!! optimize that superpi!!! ;)

Quote:

---

Originally Posted by TheKarmakazi

nice work!! optimize that superpi!!! ;)

---

thanks and i'll see what i can do about the superPi times...
next few days should be interesting.. i got a foxconn blackOps board comming from the mail tomorrow and some nice cellshock ddr3 ram:D:D

Quote:

---

Originally Posted by TheKarmakazi

nice work!! optimize that superpi!!! ;)

---

Hard to do with only 3M cache :(

Impressive results though, any updates?

Quote:

---

Originally Posted by Hazaro

Hard to do with only 3M cache :(

Impressive results though, any updates?

---

wait for couple of days... im still trying to figure out best setting with my Foxconn blackOps board :D:D

Nice result for 150 $ chip .

Quote:

---

Originally Posted by makaka

Nice result for 150 $ chip .

---

$132 ;)

Nice FSB to see on E7200, greats chip :up:

What max FSB is can handle on it ?, My chip can handle on about 550MHz too but alot of Vcore (on air 550x7.5) now! :D

Thanks

Quote:

---

Originally Posted by ZoLKoRn

Nice FSB to see on E7200, greats chip :up:

What max FSB is can handle on it ?, My chip can handle on about 550MHz too but alot of Vcore (on air 550x7.5) now! :D

Thanks

---

thanks
well the max that i have been able to pull off was 558fsb

Thanks;), I can't take over 550MHz maybe it fsb wall on my chip and this my results on air by scythe ninja mini, room temp ~27.5 ํC

That's a very high vcore with low temps ZoLKoRn! Also good fsb for air.

My chip is just like yours, needs lots of Vcore (500x8 Orthos stable with 1,55V) but I cannot keep temps low as yours with my Scythe Ninja :(

Is Vista best for WPrime? I did 19s with 500x8 under Vista.

Quote:

---

Originally Posted by Hazaro

$132 ;)

---

even better but here in Ukraine it cost 156 $ :D:D:D

hey ZoLKoRn what FPO: does your cpu have .. i see that its an ES. those chips should generally speaking overclock better right??