ASUS Striker II Extreme

Printable View

Show 100 post(s) from this thread on one page

03-18-2008, 03:00 PM
Justifire

Quote:

Originally Posted by elmor

Performance is a little better because of DDR3, except for that there should be no reason to swap (unless you want to run subzero).

Might swap my E6600 for a qx9650 and have seen this board can run qx9650 with fsb 500+, something the 780i wont be able to.
Thanx for the info m8 :)
03-18-2008, 03:09 PM
webwilli

my striker ii extreme arrived today :D

really nice board ;)

but with bios 0402.

if anyone find bios 0507 or 0504 please contact me.

thanks.
03-18-2008, 03:16 PM
Justifire

Quote:

Originally Posted by webwilli

my striker ii extreme arrived today :D

really nice board ;)

but with bios 0402.

if anyone find bios 0507 or 0504 please contact me.

thanks.

Let us know the results :D
03-18-2008, 03:31 PM
dinos22

can you do some FSB testing with a dual core

also some superpi testing at different FSB

what sort of RAM OCs were you getting? was that the best you could get out of the board??
03-18-2008, 11:45 PM
webwilli

Quote:

Originally Posted by Justifire

Let us know the results :D

later... later... i´m a n00b @ nvidia-chipset... :(
i must have time for tests and need a new bios.
03-19-2008, 02:09 AM
No_Name

Here is the Bios :)

http://www.awardfabrik.de/images/pic...ds/s2e0507.rar

GL :up:
03-19-2008, 02:30 AM
webwilli

many thanks No_Name. :up: :) :D
03-19-2008, 05:31 AM
my87csx481

I asked in another 790i thread....but I'll ask here too anyway:

Is 400fsb (1600QDR) still a hole for quads like 680i?
03-19-2008, 05:34 AM
Justifire

Made the step and ordered 1 with a qx9650 and 4gb OCZ xtc 1600 :yepp: wich i hope is the same memory as the ocz xtc 2000 sli designed for 790i.

Let the games begin :D
03-19-2008, 05:39 AM
Leeghoofd

Quote:

Originally Posted by my87csx481

I asked in another 790i thread....but I'll ask here too anyway:

Is 400fsb (1600QDR) still a hole for quads like 680i?

Nope even on 780i it works fine...
03-19-2008, 05:50 AM
my87csx481

Quote:

Originally Posted by Leeghoofd

Nope even on 780i it works fine...

Beautiful. Thanks for the response.....*rushes off to count pennies:D

Edit: What cpu, multi, and vcore were you able to get 400 fsb? What I'm getting at is my Q6600 does 450 x 8 no problem on my current 680i board (with quite a bit of vcore)....but I want to do 400 x 9....with less voltage than I'm using now, if possible. Trying to figure out if I should invest in 790i.
03-19-2008, 10:31 AM
elmor

Quote:

Originally Posted by dinos22

can you do some FSB testing with a dual core

also some superpi testing at different FSB

what sort of RAM OCs were you getting? was that the best you could get out of the board??

I have no dual that's good with FSB atm. RAM hit wall at about 1030-1050.

Here's a quick SPI32M, only tweak is LSC=1. Pretty fast :)

http://bandwidth.se/imgs/1/194/screen000.jpg

Quote:

Originally Posted by my87csx481

Beautiful. Thanks for the response.....*rushes off to count pennies:D

Edit: What cpu, multi, and vcore were you able to get 400 fsb? What I'm getting at is my Q6600 does 450 x 8 no problem on my current 680i board (with quite a bit of vcore)....but I want to do 400 x 9....with less voltage than I'm using now, if possible. Trying to figure out if I should invest in 790i.

Up to ~440 FSB can be done with stock voltages, at 450 FSB only a slight CPU VTT increase is needed.
03-19-2008, 12:16 PM
Phil The Greek

Quote:

Originally Posted by Leeghoofd

Nope even on 780i it works fine...

Don't be sure about that.My new Striker II can't play@1600fsb.It plays fine@1840fsb.But the first Striker II I had(died) could play well almost every fsb.She also had a working TRD setting but the newone doesn't work.
Talking about TRD,does it work on 790?Did you try it elmor?
03-19-2008, 12:19 PM
Phil The Greek

And something else...does 13 multi work with Striker II Extreme and QX9650?
Last time I tryed on formula it didn't.
03-19-2008, 12:33 PM
elmor

Quote:

Originally Posted by Phil The Greek

And something else...does 13 multi work with Striker II Extreme and QX9650?
Last time I tryed on formula it didn't.

Yes, I've tested up to 16x. Works perfectly :)
03-20-2008, 07:43 AM
elmor

Crazy bandwidth :D

http://bandwidth.se/imgs/1/194/13669bw.jpg

With dual core it could probably be 14GB/s.
03-20-2008, 08:42 AM
webwilli

really crazy :D

can you tell us your mainboard-voltages for this nice speed?
03-20-2008, 08:45 AM
elmor

Quote:

Originally Posted by webwilli

really crazy :D

can you tell us your mainboard-voltages for this nice speed?

CPU PLL = 1.6V
CPU VTT = 1.6V
NB Core = 1.7V
SB Core = 1.6V
03-20-2008, 08:56 AM
Lu(ky

Quote:

Originally Posted by elmor

CPU PLL = 1.6V
CPU VTT = 1.6V
NB Core = 1.7V
SB Core = 1.6V

Very nice elmor on that ram speed & timing.. What Brand DDR3 memory sticks are you using with this setup?
03-20-2008, 09:12 AM
elmor

Quote:

Originally Posted by Lu(ky

Very nice elmor on that ram speed & timing.. What Brand DDR3 memory sticks are you using with this setup?

Kingston HyperX 1800 CL8 and for some results SuperTalent ProjectX 1800 CL7. Actually the Kingstons are better :)
03-21-2008, 05:50 AM
eternal_fantasy

Hay people, I have just setup my Asus S2E on water, but when I set the VCore in the BIOS, say 1.45V, after restarting the voltage monitor in the BIOS report VCore at 1.48V, but in Windows CPU-Z shows around 1.39V... so which voltage should I be looking for? :confused:

Oh and what is the FSB Termination Voltage equivalent in the S2E BIOS? my first nForce chipset motherboard:p:

http://i225.photobucket.com/albums/d...6/DSC00681.jpg

edit: typo
03-21-2008, 06:10 AM
dinos22

sorry elmor

i didn't see your 32M SuperPi post there

superpi looks good to me hehe :)
03-21-2008, 06:10 AM
Leeghoofd

Quote:

Originally Posted by Phil The Greek

Don't be sure about that.My new Striker II can't play@1600fsb.It plays fine@1840fsb. But the first Striker II I had(died) could play well almost every fsb

I had absolutely no issue with the eVGA 780i , I cannot comment on the Asus Formula II. The eVGA with P03 bios went fine at 1600FSB - 1800FSB with the q6600 or QX9650, only linked mode would result in a no post.. but 450FSB with 1200Mhz on the ram went pretty fab... Must be a bios or early chipset issue then for the Asus Formula...
03-21-2008, 07:59 AM
Borgod

Quote:

Originally Posted by eternal_fantasy

blah blah blah

Find the right thread to begin with.
03-21-2008, 08:22 AM
webwilli

Quote:

Originally Posted by eternal_fantasy

Hay people, I have just setup my Asus S2E on water, but when I set the VCore in the BIOS, say 1.45V, after restarting the voltage monitor in the BIOS report VCore at 1.48V, but in Windows CPU-Z shows around 1.39V... so which voltage should I be looking for? :confused:

Oh and what is the FSB Termination Voltage equivalent in the S2E BIOS? my first nForce chipset motherboard:p:

Same question here. Where can i read out the VCore with my DMM?

CPU VTT = FSB Termination Voltage.

Show 100 post(s) from this thread on one page