Foxconn Blackops X48: First quick results.

Photo of the Foxconn BlackOps X48 mounted with proper cooling

http://pedrorocha.planetaclix.pt/Bla...adaCascate.jpg

Near perfect in my opinion :yepp:

Fortunately Foxconn engineers understand Shamino drawings :D

Can't see any photo, Pedro? :)

Thanks for the photo Pedro!

I agree totally.

when this mobo come out for online shoop?

I dont see any photos

I can see,damn those CellShock are great and even have your name on it:D got some 3DMARK01 for us?
@s0lid: about the QFS program have you been able to get an answer??probably they're flooded in applications and won't reply during a while(hope there's still space left for me in the program:D)

Here is it the 1st bench on cascade (-100ºC evap)

http://pedrorocha.planetaclix.pt/BlackOps5700spi.jpg

5.700MHz SuperPI easy with 1.90v Vcore:D

I corrupted bench HD with higher PCIe speed (145Mhz) so 3D numbers only after I reinstall Windows

Nice,not very good to ear about the HDD

Quote:

---

Originally Posted by DMH

I can see,damn those CellShock are great and even have your name on it:D got some 3DMARK01 for us?
@s0lid: about the QFS program have you been able to get an answer??probably they're flooded in applications and won't reply during a while(hope there's still space left for me in the program:D)

---

simply yes I have.

Congratz Pete, nice start with X48 :up:

Lookin good SF, how are dividers on this board? :toast:

Those BIOS comments are too much, thanks for sharing Pedro :D

Quote:

---

Originally Posted by G H Z

Lookin good SF, whats is real vcore? :toast:

Those BIOS comments are too much, thanks for sharing Pedro :D

---

Thanks Emanuele and Mark!

Vcore is 1.88V-1.95V. We got new bios today, but after I have done my benches :(

I'll test this with new bios and water tomorrow.

I tested Blackops with water today. I must say, that this is really stable and impressive board with lowend cooling too.

Bios 12. I can't do high fsb at any settings :shakes: It would help a lot with pi times. I think that it is my cpu. It can't do any better in other mobos. So don't look those Pi times at all :up:

Setup:
Foxconn X48 Blackops
QX9650 @ 1.648V real. (orthos screen 1.46V real and max screen 1.68V real)
G.Skill DDR3 HZ (D9GTR) 800-846MHZ 7-6-6-12 1T
3870X2 (no drivers installed)
Thermaltake ToughPower 1200W
Cooling: Swiftech blocks on CPU / VGA. Chipset on stock air.

Water was 8-10c. No insulation, so I couldn't take it lower.

Max screen: 5100MHz:
http://www.aijaa.com/img/b/00072/1623355.jpg

Max SuperPi 1M: 5GHz
http://www.aijaa.com/img/b/00025/1623363.jpg

Max SuperPi 4M: 4.95GHz
http://www.aijaa.com/img/b/00007/1623393.jpg

Max SuperPi 8M: 4.85GHz
http://www.aijaa.com/img/b/00051/1623399.jpg

Max SuperPi 32M: 4.85GHz
http://www.aijaa.com/img/b/00087/1623406.jpg

Wprime 32M: 4.8GHz
http://www.aijaa.com/img/b/00064/1623408.jpg

Orthos 4.45GHz 1.46V
http://www.aijaa.com/img/b/00026/1623415.jpg


These were max MHz speed tests. Now I could find some tweaks before i retest this system with LN2 next weekend. This cpu should do 5.7GHz SuperPi easily :yepp:

Wait, you're still using 02/15 BIOS? There are 02/16. Neither I have had luck clocking ram with good timings over 2Ghz or FSB higher than 530. Also with Vmch over 1.9v and Vdimm over 2.5v in 95% cases this board does not boot at all even at stock clocks.

Just flashed bios 2 (2/16) in. I thought, that I already flashed it yesterday :rolleyes:

Well, now the fsb problem is gone :up:
Attachment 72553

http://valid.x86-secret.com/show_oc.php?id=316431

Have to do my water test again tomorrow. Damn ;)

I want one!

You really do, believe me! :yepp:

very nice SF3d, 5.1 with water, ok , maybe iced water :)

oh no Pedro!! I just noticed you didn't put any heatsinks on the Digital mosfets! Please stick some cheapo ramsinks on it, naked Digital mosfets scare me man :D

Quote:

---

Originally Posted by tiborrr

You really do, believe me! :yepp:

---

Believe me he isn't the only one who wants that mobo and be selected to QF...

Believe me, if you used to spent months tweaking DFI nF4 board... you can be sure that you will spent years tweaking this and still there would be settings you haven't touched :D
Todays BIOS increased stability and random postcodes almost disappeared. Haven't got to test this with other memory, but with Kingston D9GTR in white slots it shows single channel, in blue slots - dual. Also hitting 2Ghz+ on memory is almost impossible at dual channel for now.

Guess what, today is my 21st birthday... and I just recieved my blackops sample. How could I be more happy? :D

Happy Bday Extera and congrats for receiving that nice present :)

Quote:

---

Originally Posted by Extera

Guess what, today is my 21st birthday... and I just recieved my blackops sample. How could I be more happy? :D

---

Hapy Birthday!!

Hi again!

Today I tested some fsb capabilities of this board. I'm more impressed everyday :up:

Test are done with aircooling!

Setup:
Foxconn BlackOPS X48
QX9650 @ 1.43V- 1.5V
G.Skill HZ DDR3 2.3V

Memory timings:
7-6-6-15 1T (sub timings 6-46-6-15-15. PL6/7) Up to 460MHz fsb (32M superpi stable.)
7-5-5-15 1T up to 450MHz fsb (32M superpi stable.)

Voltages selected in bios:
Vcpu: 1.43V - 1.5V
Vpll: 1.77V (don't know did it need that much)
Vfsb: 1.425V
VNB: 1.853V
VSB: 1.688V
Vmem: 2.32V

Max fsb:
http://www.aijaa.com/img/b/00096/1635573.jpg

http://valid.x86-secret.com/show_oc.php?id=317648


Basic 32M @ 4GHz (Don't know if it is good or not)
http://www.aijaa.com/img/b/00024/1635574.jpg

Max fsb 32M (460MHz fsb)
http://www.aijaa.com/img/b/00033/1635578.jpg


Nice board for sure :up: