Benching Spi with P5E3 WS Pro under Bertha(s): 7.953s@5708MHz first run @-115C loaded

Thanks ;)

Hey dude,

Have you experienced any coldboots problems on this board ?

No... and won't in the future cause my Cooler-Master PSU have fried today, killing this board along with a VGA card. :( That really really sucks!

Before, I don't use this vcore mod but this one :
http://images2.hiboox.com/images/4607/2ejrrlwi.jpg

Yours doesn't include OVP removal. :) You may wish to try mine in order to push the vCORE above the OVP limit (if your chip can handle it BTW).

we never reach the OVP with the jmax's mod (what is the limit ?)

Depends on the board I guess. Maybe 1.82 to 1.84 actual vCORE is the average max for OVP; and then the board stops running. :)

We were never limited in our benchs (1.95V on yorkfield).

very nice work before, love those 1M and 32M socres :clap:

Quote:

---

Originally Posted by jmax_oc

We were never limited in our benchs (1.95V on yorkfield).

---

All boards are protected with OVP. Did you actually measure vCORE with a DMM?

Quote:

---

Originally Posted by kayl

very nice work before, love those 1M and 32M socres :clap:

---

Thank you buddy :toast:

very nice work before ;)

Sweet work Before, sad about the psu and vga...

Also clean vmod explanation ;).

Best Regards.

Quote:

---

Originally Posted by before

All boards are protected with OVP. Did you actually measure vCORE with a DMM?



Thank you buddy :toast:

---

GB X48 have no ovp
and X38 have a simple mod to remove it as well
asus boards have OVP mods as well IIRC

Of course with a multimeter ;). Maybe that my P5E3 WS have a OVP but over 1.95V which was useless for our benches.

I'm really sad to see that this PSU killed your hardware like it...

Quote:

---

Originally Posted by blind_ripper

very nice work before ;)

---

Thank you. :)

Quote:

---

Originally Posted by Oliver

Sweet work Before, sad about the psu and vga...

Also clean vmod explanation ;).

Best Regards.

---

Thanks buddy :)

Quote:

---

Originally Posted by dinos22

GB X48 have no ovp
and X38 have a simple mod to remove it as well
asus boards have OVP mods as well IIRC

---

No OVP on GBs? :D How high did you ever try to?

Quote:

---

Originally Posted by jmax_oc

Of course with a multimeter ;). Maybe that my P5E3 WS have a OVP but over 1.95V which was useless for our benches.

I'm really sad to see that this PSU killed your hardware like it...

---

Thx ;) That's made me sick. The PE3 is a nice board to play with. BTW, I've tons of other ones actually, Foxconns ES, MSI, etc.

Fantastic scores as always:clap:
In around 2 weeks I hope to be able to start to play with my new cascade too:)

Nice ;) Any pics?