Printable View
some new results done today ;)
Brand: CellShock MSC
Model: DDR3-1800 8-7-6
Size: 2GB Kit ( 2x1GB )
Voltage:
vmch: 1.92v
vdimm: 2.20v / 2.24v
Timings: 8-7-6-21 1T
Frequency: 1050MHz
Cooling: Air Cooling, roomtemp: ~21C
Motherboard: Asus P5K3 Deluxe
Everest Cache&Memory
http://img175.imageshack.us/img175/6...14kreadxr9.jpg
and 1M at 1048MHz
http://img166.imageshack.us/img166/3...00cl81mqg5.jpg
Mix of aluminium/folio tray/box, center of intel stock cooler, DI and acetone.Quote:
Originally Posted by Achill3uS
It was working very good and the benefits from it, speaks by itself.
Best Regards.
Name: dinos22
Brand: Corsair Dominators 1800MHz CAS7
Model: DDR3-1800 7-7-7-20
Size: 2GB Kit ( 2x1GB )
Voltage: 2.20V
Timings: 7-7-7-20
Frequency: 1000MHz ( DDR3-2000 )
CPUz Validation:
Cooling: Air Cooling, 26C room temp
Motherboard: Gigabyte X38T-DQ6 bios F2 (first release)
Note: ONLY motherboards slots 1 and 2 are capable of decent MHz on RAM hence all single channel whether one or both occupied....slot 2 can go another 20 MHz more than one ......... i did both single stick in Slot 2 and two sticks in 1 and two slots 1M SuperPI 1000MHz 7-7-7-20
Screenshots:
1000MHz 1M SuperPi
http://img267.imageshack.us/img267/4...immcorsuw3.png
980MHz 32M SuperPi
http://img89.imageshack.us/img89/968...msuperpsw4.png
i had all the programs running in the background and it's single channel hence time penalty
Name: Boblemagnifique
Brand: Supertalent ProjectX 1800 cas7
Model: DDR3-1800 7-7-7
Size: 2GB Kit ( 2x1GB )
Voltage: 2.34V
Timings: 8-8-8-21
Frequency: 1050MHz ( DDR3-2100 )
CPUz Validation: 1061mhz : http://www.ixtremtek.com/ixtek/Hardw.../1061mhzC8.jpg
Cooling: Air Cooling
Motherboard: Asus Blitz Extreme DDR3
http://www.ixtremtek.com/ixtek/Hardw...tx/1050mhz.JPG
very nice results guys :toast:
i made 2 specify groups (Maximum OC and Benchmarks) i think the transparency is much better this way, you could see the line between the validation "stable" and the bench stable results...
if you don't like it, offer me an other way :rolleyes:
Great, I think 3 sections would be better though.. :)Quote:
Originally Posted by Achill3uS
1st
SS stable
2nd
1M stable
3rd
32M or P95 / SP2004 stable...
Reason why the order above is, most likely highest frequencies will appear as not as stable, and then one can spot a pattern more easily.. :yepp:
-_- Im up for 32M 1000mhz CL6 at next session is time is there.. -_-
CL5 1000mhz suicide I do not belive is possible with current chips, but will try... 925-950mhz should be possible... :shocked:
thanks for the advice, but 32M results are far away from P95/Memtest stable clocks you know :)Quote:
Originally Posted by M.Beier
so i think this 2 big groups are more rescindable if we will got more results...
good luck on the next DI session, you need it for the 32M at CL6 1000mhz :D (and please don't forget make pics :) )
hehe 900+ cl5 would be shocking :eek: my teammate over has got a RAM pot and he would like to buy some naked d9 chips, so maybe he will join this "game" in the future :) (i like my CellShocks too much to kill them :lol:)
:D want to see 1100Mhz for ddr3 :) any one ^^
Should be easy... hard part will be motherboard...Quote:
Originally Posted by PytonOrm
But 1200mhz+ has been done... Look at cpu-z validation ;)
CL5 1000mhz entry, will that happen in 2008, now thats the question... :shocked:
Hi all. :)
These are my lovely Cell Shock PC14400:
http://www.pctunerup.com/up/results/..._fsbliquid.JPG
Brand: Cell Shock
Model: PC14400
Size: 2*1Gb
Voltage: 2,10V
Timings: 8-7-6-21
Frequency: 1000mhz
Cooling: Air (CPU @ liquid)
Motherboard: Maximus Extreme
And now a question....
now I want to upgrade to 4Gb, but in Italy Cell Shock are unavailable.
I see in a shop Team Xtreem PC10600 cas 7-7-7-21. Someone has ever tried this ram and know the max OC and if I can use at about 1600mhz in day use?
Thanks a lot. :toast:
This is a photo:
http://www.runstore.it/files/BIEMME_Files/Foto/4391.JPG
Name: Final1977
Brand: G.Skill
Model: DDR3-1600 C7
Size: 2GB Kit
Voltage: 2.3V (BIOS)
Timings: 7-6-5-18-1T
Frequency: 1040mhz
Cooling: Air Cooling
Motherboard: ASUS Maximus Extreme
http://xs123.xs.to/xs123/08033/2080-76518843.jpg
Started playing today with my new setup ...
E8500@500X9 . Memory at 1Ghz (7-6-5-18-1T) . Subtimings in Memset 3.5 (6-48-6-16-16-2-8-2-2-16384T-1T)
Motherboard is an Asus Maximus Extreme .
Memory is Cellshock PC14400 2X1GB ... Voltage 2.25V . Cooled with a dominator air cooler .
With this memory speed i made a 32m spi sub 10min at 4.5Ghz only (no tweaks at all). :)
I can also run at same settings Pifast , Spi1M , Aquamark3 & winrar benchmark . I havent tested 3dmarks yet .
If everything goes ok this week ( lots of things & stuff going on :( ), I'll be showing you DDR3-2100 7-6-5-18 1T on a P5K3 Deluxe :D
Maybe 2150+ with slacker timings.
haha, 2100 CL7 will be INSANE on P5K3 i can't believe that you could made it on "normal" voltages... :rolleyes: but good luck for the results :up:Quote:
Originally Posted by BenchZowner
update soon guys ;)
Looking forward to see some numbers ;).Quote:
Originally Posted by BenchZowner
Keep pushing it.
Name - Kunaak
Brand - Super Talent
Model - DDR3 1866 MHz C8.
Size - 2 x 1024
Voltage - 2.20
Timings - 9-9-9-27
Frequency - 1000
Results - Max OC only. Top Stable is 960 Mhz.
Cooling - Air, 2 x 120 mm fans on ram and videocard.
Motherboard - Asus P5K3 Deluxe, Bios 1001.
Note: 100% total suicide shot. done with SetFSB. Not even remotely stable, just did it to reach 1k. unfortunatly theres a sharp fall from cas 8-7-6-20-1T at 960 mhz, to reach 1000.
I just think the boards not up to giving much beyond 960, it doesnt respond to extra voltage at all.
but still 950 is real easy to hit, and maintain stable, so I can't complain.
http://valid.x86-secret.com/show_oc.php?id=301218
(CPUZ Shot was with EIST active - should read a 7x)
Note to self:Quote:
Originally Posted by BenchZowner
Even if you had the time this week to do the stuff... you'd still need a high FSB clocking CPU... oh well! I forgot that I have to find a decent chip first :D
Well...not this week...but in the following weeks I'll be ready for those numbers :yepp:
can't wait Bench :DQuote:
Originally Posted by BenchZowner
update done.
First OCZ on the list I see, but done looong time ago [september 2007] ;).
Name JMKS
Brand OCZ
Model Platinum 1600 7-7-7
Size 2x1GB
Voltage ~2,24-2,30V [higher wasn't better :p:]
Timings 7-6-6-x, 2T
Frequency 1000
Results (Maximum OC or Benchmarks) => below
Cooling air, one 120mm ~1200RPM
Motherboard Asus Blitz Extreme
RAM by eXtremeMem.pl :)
http://valid.x86-secret.com/show_oc.php?id=245383 - valid @ CL8 [the only one I did if we are talking about just pressing F7]
Sticks: http://img145.imageshack.us/my.php?i...mgp0128lr1.jpg
Nearly completed setup: http://img90.imageshack.us/my.php?image=imgp0135fb4.jpg
Something like "suicide" @ 2,20V {BIOS}: 1000 7-6-6-x 2T
http://img261.imageshack.us/my.php?i...vscreenxx9.jpg
Benchmarks: @ 2,24V @ BIOS or sth similar:
500x6 Allendale 16M with tightest subtimings I managed ;)
http://img296.imageshack.us/img296/4...x4xcpuzbm5.jpg
same with 500x7 Kentsfield
http://img477.imageshack.us/img477/4...cbquad2dq9.jpg
No higher attempts because my E6400 has its FSB wall @ ~510 and I wasn't doing anything like suicide this time, just testing DDR3 platform to know it better :) {it was my first and only DDR3 "session"}
List updated :up:
List updated, and re-designed with saaya (thanks for help mate) :D
your welcome :toast:
and no, i didnt delete/edit the results of non cellshock mem :P
well i tried but achillus restored everything :wasntme:
jk :lol:
im trying to get better db code so we can improve this database and have drop down sorting buttons etc.
would be nice to have an up to date memory oc database again, its been a while since i saw one that gets updated regularly :toast:
Soon we need to expand to 1100 I think, and might even 1200mhz... We've seen 1200mhz+ on online validation..
Big Brother is watching you! ;)Quote:
Originally Posted by saaya
hehehe :lol:
anyway, really thanks for the help, i hope we could make a bigger, faster, better (lol) memory oc db what nobody seen before :D maybe for non-1000mhz results too, maybe :D
show it to me pls :)Quote:
Originally Posted by M.Beier