i think ill stick to my current nTune just because the overclocking on this is useless to me when i use other things to overclock, only thing I like is the 3DMonitor too bad it's ~50C off from my actual CPU temp :shrug:
Printable View
i think ill stick to my current nTune just because the overclocking on this is useless to me when i use other things to overclock, only thing I like is the 3DMonitor too bad it's ~50C off from my actual CPU temp :shrug:
Quote:
Originally Posted by metro.cl
That is what I think it is.Quote:
Originally Posted by xoqolatl
I hated the previous nTune, and now I have a P35 motherboard.
Hmm.... I just noticed that in this new nTune when I try to overclock my 2x 8800gts 640mb OC EVGA cards, only one card actually adjusts it's clocks. THe other does not.
Also, the voltage adjustment on the GPU/GDDR does not function for me.
Any ideas why?
yeah that was one of the coolest inventions Tom came up with and he reaLLY LOVES it too :DQuote:
Originally Posted by OBR
it's worth it dude ;)Quote:
Originally Posted by saaya
Well so far I don't have crap for being able to over-volt my graphics cards..... or RAM..... etc.
But here is the long awaited shot of the little 3d graphics interface for the nVidia System Performance Monitor.
http://www.kalionzes.com/computers/n...em_monitor.jpg
Do any of you guys with 8800gt cards get this option to work? I've got two brand new 8800gts OC Evga cards with 640mb ram and the option is just grayed out...... BLAH!!!
http://www.kalionzes.com/computers/GPU_Mem_volts.jpg
Voltage adjust is available only with G92 graphic cards!
^^^ Damn.....
As are the .45nm CPU's as well....
:(
why the heck only G92 gfx have volt adjustments??
OT,
Zdenku, nechtel by sis v podpisu zmenit nazvy na Gigabyte X,Y,Z misto Gigabyte X, Gigabyte Y, Gigabyte Z?
am this software is only for vista or what?
But not at the moment or can you post a screen with active v-control? :confused:Quote:
Originally Posted by OBR
I did not like the way it overvolts my v-core...I set it to 1.6 (was doing a little benching :D ) and rebooted to check the bios setting and it read 1.65 volts! :down:
I thought I would like having the ability to seperately oc the shaders on my Ultra's, but the newest version of RivaTuner does that now...so I see no reason to have another program open for oc'ing. Clock Gen does the PCIe buss and CPU and RivaTuner does the GPU's...so I uninstalled it and reinstalled version 5.05.
I like the system monitor function of the older version as well....just stick it off in the corner to refer to when oc'ing or crunching. I like that I can uase it to verify my Everest OSD monitoring as well. The new 3D monitor spans the whole screen...all-n-all...I think I'll pass on this version.
didn't see anyone post a 2D monitoring interface
i reckon it's awesome :D
http://img257.imageshack.us/img257/7...523665pkj5.png
Why do we take pains in installing a program the only crashes our system. All in the name of ocing an Nvidia card. Well we should start thinking towards Bios modding and flashing. With that the cpu and memory has one program less to run. Looks, is not all that matters(3D monitor console), but how effective and stable is our systems at the end of the day. Sorry to all XS members for my veiw, i believe nTune sucks.Quote:
Originally Posted by Sagart
Meanwhile which bios, cpu, voltages and memory timing re u using on ur P5N-E SLI mobo, Sargat?
Bios 0403Quote:
Originally Posted by Shocker003
Q6600 @ 2.4GHz 1.025v (Board is vdrop-modded)
Max bench @ 375MHz FSB(3375MHz), max stable @ 355MHz FSB (3.2GHz)
4 x 1GB Corsairs PC6400CL5 @ 800MHz(DDR) 4-4-4-10 @ 2v
NB-voltage ~1.2(stock)
:)
Hi,Quote:
Originally Posted by Sagart
Is ur cpu a B3 or GO? :confused:
I ve never gotten over 3.2Ghz:( and any V-core lower than 1.3v@3Ghz it woun´t boot
B3.Quote:
Originally Posted by Shocker003
Try running memory Linked and in Sync, that's the only way I could get it to work... ;)
I might also have to increase the NB-voltage to 1.563v.
Quote:
Originally Posted by Sagart
Thanks Pal, i will give it a shot:up: My is already linked and in Sync, with NB voltage @1.3...
nTune sucks... it doesn't really have any functionality without a nVIDIA motherboard. Yet they force you to download the crap to view your GPU temp unless you use a third party software.
I downloaded it once, realized how worthless it was - and tried to uninstall it:
"You need to have a nForce 2 or nForce 3 motherboard to uninstall this software"
not joking in order to flame them or anything, it seriously told me to get a nForce 2 mobo in order to uninstall... this was in March 2007.
you had me there for a sec
i went to uninstall ntune on my 24/7 rig (intel mobo) and it uninstalled just fine :shrug:
Really? SWEET.... cant wait for this to finish! :up: :D :D :DQuote:
Originally Posted by OBR
It wont work for me.... just starts setup and spontaneously exits...