so what is the general oc these are capable of?
Printable View
so what is the general oc these are capable of?
re-read the first first posts to find out ;)Quote:
Originally Posted by zfactor
i guess the only differerence between these and the 6400PQ is the 8000's are binned higher maybe
they both use powerchips but the voltage is different
my 6400's arrived yesterday my q6600 today ill try to get 1:1 400 working first then see what i can push out of the RAM
Another dig up from the grave...
Are these things stable at tighter timings than 5-5-5-15?
Quote:
Originally Posted by t_ski
I believe Enjoy had them stable 5-4-3-x @ 550mhz...
Doesn't have to be that high of an FSB. Can these thing do 4-4-4-12 @ 400 FSB or something close?
honestly didn't remember what they did for 4-4-4-12 but these days most powerchip IC based 2x2GB can at least do 400mhz 4-4-4-12 i think ?Quote:
Originally Posted by t_ski
Probably be revisiting this memory and more 2x2GB kits once i find a new X48/P45 based platform to test on :)
I'd be interested in that information :D
More than likely.Quote:
Originally Posted by t_ski
I'd be surprised if not, but i wouldn't count on much more.
Generally with PSC, you get to DDR2-850 to DDR2-900 at most with CAS 4.
They are a lot stronger with CAS 5.
You can usually run 4-4-3 to similar speeds as 4-4-4.
Then you need to go 5-4-3 or 5-5-* to get farther.
I just got this memory, but, having a problem getting it stable. I'm using a DFI DK P35 T2RS. Using the 333/667 divider to give me 934MHz. Eva2000, do you still have your settings? If so, could you show me what they were? I'm set with everything at Auto right now except for the 4 main timings. This gives me, in Memset, the following
All Precharge to Activate - 6
Refresh Cycle Time - 52
Performance Level - 8
Write to Precharge Delay - 14
Write to Read Delay - 11
Act to Act Delayed - 3
Read to Write Delay - 8
Read to Precharge - 3
All Precharge to Refresh Delay - 6
Refresh Period - 2600T
Command Rate - 2T
My System was stable with my Crucial Ballistix (in sig), and I didn't change anything except the Memory timings and voltage (2.2 down to 2.1V)