42.8c, 47.8c.Quote:
Originally posted by Juggernout
Can someone please tell me what :
109 F
& 118 F
are in normal degrees ? (°)
Thx ! :)
C = (F-32) * (5/9) I think.
Can't be ambient vs load... what is it..?
idle vs load?
Printable View
42.8c, 47.8c.Quote:
Originally posted by Juggernout
Can someone please tell me what :
109 F
& 118 F
are in normal degrees ? (°)
Thx ! :)
C = (F-32) * (5/9) I think.
Can't be ambient vs load... what is it..?
idle vs load?
News:
Nr.1:
http://www.overclockers.at/attachmen...169&fullpage=1
Nr2: http://www.overclockers.at/attachmen...168&fullpage=1
Greetz !
Hehe, not sure but I think it depends on the structure of the carbon.Quote:
Originally posted by antipop
It's diamond so i don't think that would be a problem.
Maybe with some heat from the cpu it'll transform into coal ;)
Beware :D
Diamond, the sparkly variety, has a particular structure but it's not the best thermal conductor (from what I've read).
Supposedly the best structure is flat layered carbon 'sheets' which is extremely good at conducting heat but is delicate.
carbon nano tubes work a lot better but afaik 1gr costs 500.000$ or so :D
I know i was kidding, diamond and coal are made of the smae product (carbon) but they have very different cristalin structures and that make all the difference. Diamond is produced at much higher pressure and tempQuote:
Originally posted by NickK
Hehe, not sure but I think it depends on the structure of the carbon.
hahaha i like this one ^^
http://www.overclockers.at/attachmen...chmentid=28768
That look really nice, i wonder how the design will perform. You know what is the next step : numbers :)Quote:
Originally posted by Juggernout
News:
Nr.1:
http://www.overclockers.at/attachmen...169&fullpage=1
Nr2: http://www.overclockers.at/attachmen...168&fullpage=1
Greetz !
why did you make a spiral in the middle of the block? do you think making the water turn in a circly in the block will make it run better?
I think so too, cuz the more turbulence you have, the more heattransfer :)Quote:
Originally posted by saaya
why did you make a spiral in the middle of the block? do you think making the water turn in a circly in the block will make it run better?
but on the toher hand you get less flow...
Yes, but that won't be an issue with a decent pump like an Eheim or somethin' like that :)
I guess I will hold it in my hands next wednesday ! :D
Most expensive cooler in tha world ! :D
Greetz
Time for you to get cascade from cathar and do direct comparison :P Exotic material vs exotic design :)
News:
If it works my connection ;):D;) will send me another diamondplate for my GPU ! :D
i luv it...
nice. you got a damned good hookup.
what are your temps like?
he'll get the block on wednesday.
wow theyre sending you another block for the gpu? nice! :toast:
Or you could just grow them.Quote:
Originally posted by antipop
I know i was kidding, diamond and coal are made of the smae product (carbon) but they have very different cristalin structures and that make all the difference. Diamond is produced at much higher pressure and temp
:D
Its done.
Its awesome and it kicks ass.
http://www.overclockers.at/showthrea...15#post1188915
english edit will follow !
greetz
Well with a quick BS translation on babelfish, german to english I get this...
Then using Systran with the same...Quote:
So now to the MainQuestion: The Temps? 2 wheel this (Airplex) - 4 exhausts @ 7V NB & Graka Wak CCU AMD 1700+ @ 2400Mhz - 1.9Vcore Measured with Senfu similar part Roomtemp: 18° CCU: (full load - prime95 since 1 1/2std.) 21° water: 20° The radiator is coldly. Before a delta Zern was inside that had 34° idle. (10mins before) thus kommts mA please ned with that can be ned & CO. I had already A Prome, A Vapo & otherwise rather all cooling possibilities in the PC thus act like thermometers is 100% reliably. Thank you to all me this Zuckerl made possible: My friend in the USA for the diamond plate & before all at the Zern innumerable hours in the development & processing of the radiator invested! (& the carbon mounting plate which super+ingeniously is) Mfg Jugger
Think enough to get at least part of an idea on it.... very intriguing.Quote:
So now to the MainQuestion: The Temps?
2 wheel this (Airplex) - 4 exhausts @ 7V NB & Graka Wak CCU AMD 1700+
@ 2400Mhz - 1.9Vcore
Measured with Senfu similar part
Roomtemp: 18° CCU: (full load - prime95 since 1 1/2std.) 21°
water: 20°
The radiator is coldly. Before a delta Zern was inside that had 34°
idle. (10mins before) thus kommts mA please ned with that can be ned &
CO. I had already A Prome, A Vapo & otherwise rather all cooling
possibilities in the PC thus act like thermometers is 100% reliably.
Thank you to all me this Zuckerl made possible: My friend in the USA
for the diamond plate & before all at the Zern innumerable hours in
the development & processing of the radiator invested! (& the carbon
mounting plate which super+ingeniously is)
Mfg Jugger
Apologies for destroying your language.... but had to get some kind of an idea out of it!! lol
nice!!!!:slobber:
the swirl is made in copper or in the diamond?
swirl is copper
dude that is aws me but ncome.how you get a hook up like that is beyond me but nice job
na super, hatte mich schon gefragt was aus dir geworden is :D
1°C unterschied zwischen wasser und cpu is echt edel! herzlichen glückwunsch! :toast:
schon dran gedacht das wasser zu chilln? :D
Da saaya kann deutsch !?
cool.
chilln is zu anstrengend. :D
Bin amal froh das alles läuft.
Werd ihn aber demnächst zu ner page schicken die ihn mit 12 anderen normalen waks vergleicht ! :)
hehe..
mfg